Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 46 search results

Sort on:

Sort on:

'- Used to convert 2 single function LEDs, halogens or regular incandescent bulbs to dual function (dual 1157 style)
- Comes with 2 single input power wires and 4 output wires to operate 2 light lights, giving them dual function
- Run & stop, run & turn or high & low.
- Works for taillights, signals, markers, fender tip lights, LED accent lighting or 2 x 25 Watt driving lights
- Hard wired for universal applications
- No heat build-up issues

Badlands, Intensifier Module. 2 input 4 output

#513407

Stock:Yes

Superbright amber (yellow) light emitting LEDs that are sequential working, inside a chrome plated aluminum housing. Dimensions approx. 25mm thick x 90mm wide x 22mm high. Universal mount at handlebar or rear of bike through a 5/16" mounting hole.
Note: Requires three holes, per flame thrower, to be drilled in saddlebag for mounting screws and wiring.

Badlands, E-Z bolt-on 'Flame Throwers' turn signals

#513447

Stock:Yes

- Run-Turn-Brake module for rear turn signals
- Gives running light and brakelight function to turn signals and maintains turn signal function
- Load equalizer is built-in

Badlands, Illuminator Plug 'n Play Run-Turn-Brake module

#513304

Stock:Yes

- Gives running light and brakelight function to rear turn signals
- Maintains turn signal function
- Load equalizer is built-in allowing the module to work with stock or any custom turn signals
- Plug 'n Play installation
Note: Module will work with CAN-bus controlled bikes only.

Badlands, Illuminator Plug 'n Play

#588885

Stock:Yes

- Run-Turn-Brake module for rear turn signals
- Gives running light and brake light function to turn signals and maintains turn signal function
- Load equalizer is built-in

Badlands, Illuminator Plug 'n Play Run-Turn-Brake module

#513316

Stock:Yes

- Run-Turn-Brake module for rear turn signals
- Gives running light and brakelight function to turn signals and maintains turn signal function
- Load equalizer is built-in

Badlands, Illuminator Plug 'n Play Run-Turn-Brake module

#513306

Stock:Yes

Provides running light functions to the front turn signals for added visibility.
The built-in load equalizer prevents rapid flashing turn signals.

Badlands Indian Illuminator front turn signals (run/turn)

#567566

Stock:Yes

- Run-Turn-Brake module for rear turn signals
- Gives running light and brakelight function to turn signals and maintains turn signal function
- Load equalizer is built-in

Badlands, Illuminator Plug 'n Play Run-Turn-Brake module

#513311

Stock:Yes

- Gives running light and brake light function to rear turn signals
- Maintains turn signal function
- Load equalizer is built-in allowing the module to work with stock or any custom turn signals
- Plug 'n Play installation
Note: Module will work with CAN-bus controlled bikes only.

Badlands, CAN-bus Illuminator Plug 'n Play

#513457

Stock:Yes

- With Deutsch 8-pin plug (Plug & Play)
- Plug-in replacement for the stock 68540-96 (Big Twin) and 68441-00 (XL) turn signal canceller
- Press the turn signal button once and after approximately 10 seconds flashing it will automatically shut turn signal off
- Can manually cancel at each time, for fast lane change etc.
- To re-activate, simply push again
- Load equalizer allows running LEDs up to 70W per side
- Solid state flasher and emergency flasher mode are built-in

Badlands, self canceling turn signal module

#513393

Stock:No

- Run-Turn-Brake module for rear turn signals
- Gives running light and brakelight function to turn signals and maintains turn signal function
- Load equalizer is built-in
- Module will work with 2000-up TSM and TSSM module/security systems.

Badlands, Illuminator Plug 'n Play Run-Turn-Brake module

#513313

Stock:Yes

- Run-Turn-Brake module for rear turn signals
- Gives running light and brakelight function to turn signals and maintains turn signal function
- Load equalizer is built-in
- Module will work with 2000-up TSM and TSSM module/security systems.
Note: Order 513307 rear fender harness seperately, stock is not compatible

Badlands, Illuminator Plug 'n Play Run-Turn-Brake module

#513307

Stock:Yes

Used for rear turn signals only.
Used with non CAN-Bus compliant LEDs.
Plug 'n Play installation.
Used to prevent rapid-flashing turn signal indicators and the BCM (Body Control Module) triggering trouble codes when non-compliant turn signals are installed.
Produces no heat due to solid state construction and will run emergency turn signal flashers for any length of time.
Dimensions: 8.5" (21.6cm) × 6.5" (16.5cm) × 1.25" (3.2cm).

Badlands, CAN-bus turn signal load equalizer III

#513464

Stock:No

With 6-pin Molex connector.
Plug 'n Play installation.
Used to correct rapid-flashing turn signal indicators when non-compliant turn signals are installed.
Works great with virtually any available turn signal with LEDs, halogen or regular incandescent bulbs up to a maximum of 100W.
Produces absolutely no heat due to solid state construction and will run emergency turn signal flashers for any length of time.
Dimensions: 8.5" (21.6cm) × 6.5" (16.5cm) × 1.25" (3.2cm).

Badlands, turn signal load equalizer III

#513374

Stock:Yes

- Gives running light and brake light function to rear turn signals
- Maintains turn signal function
- Load equalizer is built-in allowing the module to work with stock or any custom turn signals
- Plug 'n Play installation
Note: Module will work with CAN-bus controlled bikes only.

Badlands, CAN-bus Illuminator Plug 'n Play

#513458

Stock:Yes

Used to prevent the brake light BCM (Body Control Module) triggering trouble codes / fault codes when removing the center taillight and replacing it with a non CAN-bus compliant taillight on CAN-bus wired models.

Badlands, CAN-bus brake light load equalizer

#588886

Stock:No

- Run-Turn-Brake module for rear turn signals
- Gives running light and brakelight function to turn signals and maintains turn signal function
- Load equalizer is built-in

Badlands, Illuminator Plug 'n Play Run-Turn-Brake module

#513312

Stock:Yes

- Run-Turn-Brake module for rear turn signals
- Gives running light and brakelight function to turn signals and maintains turn signal function
- Load equalizer is built-in
- Module will work with 2000-up TSM and TSSM module/security systems.

Badlands, Illuminator Plug 'n Play Run-Turn-Brake module

#513317

Stock:No

- Used to provide running light function for front turn signals only
- Hard wired
- Prevents rapid-flashing turn signal indicators
- Prevents BCM triggering trouble codes when non-compliant turn signals are installed
- Load equalizer is built-in
Note: Module will work with CAN-bus controlled bikes only.

Badlands, hard wired CAN-bus illuminator

#513459

Stock:Yes

'- Used to convert single function LED, halogen or incandescent bulb to dual function
- Comes with a single power wire to operate a single light, giving it dual function
- Run & stop, run & turn or high & low.
- Works for taillights, signals, markers, fender tip lights, LED accent lighting or 2 x 25 Watt driving lights
- No heat build-up issues
- Hard wired for universal use

Badlands, Intensifier Module. 1 input 2 output

#513406

Stock:No