BIKE SELECTOR

20 of 89 search results

Sort on:

1-3/4 (44.5mm) stainless steel. This is a traditional style Ripple exhaust pipe section. Great to modify / customize your current exhaust system or use it while creating a one-off system. Section is about 22" (56cm) long and has 18" (46cm) of ripple.
Bare knuckle performance

Bare Knuckle Performance, Ripple exhaust pipe. 1-3/4" SS

#700939

Stock:Yes

1-3/4 (44.5mm) mild steel. This is a traditional style Ripple exhaust pipe section. Great to modify / customize your current exhaust system or use it while creating a one-off system. Section is about 22" (56cm) long and has 18" (46cm) of ripple.
Bare knuckle performance

Bare Knuckle Performance, Ripple exhaust pipe. 1-3/4" mild

#700938

Stock:Yes

2" (51.1mm) stainless steel. This is a traditional style Ripple exhaust pipe section. Great to modify / customize your current exhaust system or use it while creating a one-off system. Section is about 22" (56cm) long and has 18" (46cm) of ripple.
Bare knuckle performance

Bare Knuckle Performance, Ripple exhaust pipe. 2" SS

#700941

Stock:Yes

This is, like most similar seat screws, hand installed. The additional hole in the screw allows you to stick a pin or screw driver in and give it just a little extra over a 'finger tight' installation, to help prevent losing it. Comes complete with rubber O-ring to help with a mar-free installation.
Bare knuckle performance

Bare Knuckle Performance, seat screw. 1/4-28. Polished

#700903

Stock:Yes

This is, like most similar seat screws, hand installed. The additional hole in the screw allows you to stick a pin or screw driver in and give it just a little extra over a 'finger tight' installation, to help prevent losing it. Comes complete with rubber O-ring to help with a mar-free installation.
Bare knuckle performance

Bare Knuckle Performance, seat screw. 1/4-20. Gold

#700908

Stock:Yes

Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers with sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and custom tapered washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize. Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.
Bare knuckle performance

Bare Knuckle Performance, stainless axle kit. Front wheel

#700914

Stock:Yes

Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers with sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and custom tapered washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize. Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.
Bare knuckle performance

Bare Knuckle Performance, stainless axle kit. Front wheel

#700911

Stock:Yes

Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers with sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and custom tapered washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize. OEM replacement reference 4300080. Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.
Bare knuckle performance

Bare Knuckle Performance, stainless axle kit. Front wheel

#700915

Stock:Yes

Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize. OEM replacement reference 43000074. Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.
Bare knuckle performance

Bare Knuckle Performance, stainless axle kit. Rear wheel

#700922

Stock:No

Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize. OEM replacement reference 41114-90. Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.
Bare knuckle performance

Bare Knuckle Performance, stainless axle kit. Rear wheel

#700925

Stock:Yes

Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize. OEM replacement reference 4300073. Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.
Bare knuckle performance

Bare Knuckle Performance, stainless axle kit. Rear wheel

#700921

Stock:Yes

This conversion kit includes a spacer conversion kit and everything needed to allow you to to run an FXR rear wheel in your 02-07 Bagger. Includes stainless axle, head washer, 12-point nut, retaining ring, 2 eccentrics, 4 spacers & anti-seize. Made from 17-4 series polished stainless steel, which offers sheer and tensile strength comparable to that of chromoly with superior corrosion resistance for a lasting custom look. Axle will not bend or break and is ball burnished for the toughest bearing surface possible. Comes with a high quality 12-point stainless steel nut and washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize. Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.
Bare knuckle performance

Bare Knuckle Performance, stainless axle kit. Rear wheel FXR

#700924

Stock:Yes

1" (25.4mm) extension. Quickest, easiest way to extend your front end to give your bike that bit of extra ground clearance - Black anodized finish - Precision machined aluminum - Witness marks make fine height adjustment quick - Complete with O-rings
Bare knuckle performance

Bare Knuckle Performance, fork tube extensions. 39mm. 1"

#700970

Stock:Yes

Replacement axle for 700958 Bare Knuckle Performance 'Super Narrow' 39mm triple tree set'
Bare knuckle performance

Bare Knuckle Performance, 39mm axle kit

#703463

Stock:Yes

Bare knuckle performance

Bare Knuckle Performance, rear axle kit

#703466

Stock:Yes

Includes proprietary nut, eccentrics, shoulder washer, E-ring and anti-seize. Increased eccentric thickness prevents failure. Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize. OEM replacement reference 41056-08. Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.
Bare knuckle performance

Bare Knuckle Performance, stainless axle kit. Rear wheel

#700929

Stock:Yes

Includes axle, head washer, nut washer, 12-point nut, retaining ring, and anti-seize. Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize. OEM replacement reference 41056-09. Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.
Bare knuckle performance

Bare Knuckle Performance, stainless axle kit. Rear wheel

#700930

Stock:No

Includes 1" (25.4mm) diameter axle, head washer, nut washer, 12-point nut, retaining ring, and anti-seize. Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize. OEM replacement reference 41114-06, 41114-06A. Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.
Bare knuckle performance

Bare Knuckle Performance, stainless axle kit. Rear wheel

#700926

Stock:Yes

An inner primary bearing, that supports the transmission mainshaft, was added to the aluminum primary housing with the introduction of the 1965 Panhead. Before that the tin primary housing was used and there was no option to install any aftermarket bearing support to support the maindrive gear bushing, that is the cause of leaking mainshafts, worse than with the 1965-up transmissions. The Overbearing 2.0 is actually a hardened replacement for the stock mainshaft lock nut (35211-36), with a precision ground roller bearing inside. When installed the Overbearing 2.0 keeps your mainshaft and main drive gear concentric, eliminating maindrive gear bushing wear which drastically reduces, if not altogether prevents mainshaft leaks. This narrower 2.0 version is now fully compatible with all regular stock and aftermarket clutch hubs.
Bare knuckle performance

Bare Knuckle Performance, Overbearing 2.0

#700953

Stock:Yes

For use with 41mm diameter fork tubes. Gloss black powder coated. This is the ORIGINAL, but improved, Bare Knuckle Performance Super Narrow triple tree kit. These Super Narrow trees are 1" (2.54mm) narrower than a stock Narrow Glide with 6" (152.4mm) center to center distance of tubes, rather than 7" (177.8mm). Comes complete with steering stem, tapered flange washer, and an ARP stem bolt. - Great for building a classic Super Narrow bike - With integral steering stop mount holes - Drilled and counter bored for 3/8" headlight bolt - Drilled and counter bored for 1/2" riser bolts - Traditional 3-1/2" (8.9cm) riser bolt spacing - With wheel axle - Includes all required installation hardware. The required 1" diameter Super Narrow stainless wheel axle is included and offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break. Comes with a high quality 12-point stainless steel nut and custom tapered washer. Nut is secured by a stainless steel e-ring. Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.
Bare knuckle performance

Bare Knuckle Performance, Super Narrow triple tree kit. 41mm

#700957

Stock:Yes