BIKE SELECTOR

20 of 725 search results

Sort on:

OEM replacement reference 37337-36 (2461-36)
Cometic

Cometic, oil seal clutch hub nut

#561689

Stock:Yes

OEM replacement reference 11113.
Cometic

Cometic, O-ring 5th. gear mainshaft transmission

#561256

Stock:Yes

.031" thick fiber, a premium hi-temperature, hi-density creep resistant material that requires no re-torquing, no additional sealants, is fuel resistant and asbestos free. OEM replacement reference 25225-93, 25225-93A, 25225-93B. Note: Cometic advises to use .032" thickness AFM to help minimize effecting camshaft end play.
Cometic

Cometic, cam cover gaskets. .032" Fiber

#561720

Stock:Yes

MLS (Multi Layer Steel). Front & rear gasket for one engine. 4.00" fits 110" OEM H-D Twin Cooled engines only. Will not fit 110" non-Twin Cooled models. Stock Twin Cam gasket is approx. .040" thick. OEM replacement reference 16500168. MLS (Multi Layer Steel) explained: MLS consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin o-rings, when in use.
Cometic

Cometic, cylinder head gaskets 4" bore .030" MLS

#561147

Stock:Yes

.030" MLS (Multi Layer Steel). Gasket bore is 4.220". MLS (Multi Layer Steel) explained: MLS consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of any dowel pin o-rings.
Cometic

Cometic, cylinder head gasket set. .030" MLS 4.200" bore

#568453

Stock:Yes

OEM replacement reference 25416-99, 25416-99A, 25416-99B.
Cometic

Cometic, O-ring derby cover

#561504

Stock:Yes

.040" MLS (Multi Layer Steel). Gasket bore is 4.205". MLS (Multi Layer Steel) explained: MLS consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of any dowel pin o-rings.
Cometic

Cometic, cylinder head gasket set. .040" MLS 4.185" bore

#568449

Stock:Yes

.027" MLS (multi Layer Steel) head & .014" RCS (Rubber Coated Steel) base gaskets. 4.500" bore. For water & oil cooled heads. Heads must be plugged. No embossing on heads for water or oil cooling ports but for bore & oil drain only. Therefore heads must be plugged or welded in all cases. Kit to service one engine.
Cometic

Cometic, head & base gasket kit 4.500" MLS/RCS

#568480

Stock:Yes

.040" MLS (Multi Layer Steel) head & .020" RCS (Rubber Coated Steel) base gaskets. 4.500" bore. For water & oil cooled heads. Heads must be plugged. No embossing on heads for water or oil cooling ports but for bore & oil drain only. Therefore heads must be plugged or welded in all cases. Kit to service one engine.
Cometic

Cometic, head & base gasket kit 4.500"

#568479

Stock:Yes

MLS (Multi Layer Steel). Front & rear gasket for one engine. 3-7/8" (3.875") fits 103" OEM H-D Twin Cooled engines only. Will not fit 103" non-Twin Cooled models. Stock Twin Cam gasket is approx. .040" thick. OEM replacement reference 16500066. MLS (Multi Layer Steel) explained: MLS consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin o-rings, when in use.
Cometic

Cometic, cylinder head gaskets 3-7/8" bore .027" MLS

#561111

Stock:Yes

Everything you need when assembling the transmission. OEM replacement reference 33031-82.
Cometic

Cometic, 5-speed transmission gasket & seal kit

#561117

Stock:Yes

With 3.50" bore MLS (Multi-Layer-Steel) .040" thick head gaskets. The SLS (Single-Layer-Steel) cylinder base gaskets and SLS rocker cover gaskets used in these sets are .020" thick and have .001" of high temperature viton rubber coating on both sides. Kit comes with all gaskets, seals and o-ring for a complete top end rebuild.
Cometic

Cometic, EST top end gasket kit. XL1100

#561056

Stock:Yes

With .032" copper head gaskets & .031" base gaskets. 3.250" bore. Complete kit with all gaskets, seals and o-ring that are used on this specific H-D models. Note: Does not include primary gaskets.
Cometic

Cometic, motor only gasket set. XL Sportster

#561029

Stock:Yes

OEM replacement reference 16769-73.
Cometic

Cometic, cylinder head gaskets. .032" copper

#561199

Stock:Yes

OEM replacement reference 16769-73.
Cometic

Cometic, cylinder head gaskets. .043" copper

#561200

Stock:Yes

OEM replacement reference 16769-72A.
Cometic

Cometic, cylinder head gaskets. .020" copper

#561198

Stock:Yes

With .040" MLS (Multi Layer Steel) head gaskets. This EST (Extreme-Sealing-Technology) gasket sets are complete with all gaskets, seals and o-rings that are used on the specific H-D model that is mentioned, excluding primary gaskets. It's the easy way to do a complete overhaul and have all gaskets that are necessary in one package to reassemble the engine. This EST gasket set contain MLS (Multi-Layer-Steel) head gaskets which eliminates the use of dowel pin o-rings. Base gaskets are SLS (Single Layer Steel) .020" thick. They have .005" of high temperature Viton rubber on both sides and are the strongest on the market. Rocker cover gaskets are also .020" thick SLS. They will not weep, extrude, tear or become brittle over time. Exhaust gaskets will not hinder exhaust gas flow and will not fray into the exhaust port. Valve seals utilize Viton rubber and outer springs for a perfect seal. - MLS = Multi-Layer-Steel explained: Consists of a top and bottom layer of stainless spring steel which is covered by high temperature rubber on both sides. The inner ring is also stainless steel. These 3 layer gaskets are rivited together, outside the gasket surface, for ease of installation. MLS head gaskets eliminate the use of dowel pin o-rings.
Cometic

Cometic, EST motor only gasket kit. 4" bore

#561567

Stock:Yes

This EST (Extreme-Sealing-Technology) gasket set is complete with all gaskets, seals and o-rings that are used on this model, including primary gaskets. It's the easy way to do a complete overhaul and have all gaskets that are necessary in one package to reassemble the engine. This EST gasket set contains MLS (Multi-Layer-Steel) .030" thick head gaskets which eliminates the use of dowel pin o-rings. Base gaskets are SLS (Single-Layer-Steel) .020" thick. They have .005" of high temperature Viton rubber on both sides and are the strongest on the market. Rocker cover gaskets are also .020" thick SLS. They will not weep, extrude, tear or become brittle over time. Exhaust gaskets will not hinder exhaust gas flow and will not fray into the exhaust port. Valve seals utilize Viton rubber and outer springs for a perfect seal.
Cometic

Cometic, EST motor gasket kit. 3-1/2" bore

#561555

Stock:Yes

With 3.812" bore MLS (Multi-Layer-Steel) .030" thick head gaskets. The SLS (Single-Layer-Steel) cylinder base gaskets and SLS rocker cover gaskets used in these sets are .020" thick and have .001" of high temperature viton rubber coating on both sides. Kit comes with all gaskets, seals and o-ring for a complete top end rebuild.
Cometic

Cometic, EST top end gasket kit. Evo B.T. 3-13/16" big bore

#561811

Stock:Yes

This EST (Extreme-Sealing-Technology) gasket set is complete with all gaskets, seals and o-rings that are used on this model, including primary gaskets. It's the easy way to do a complete overhaul and have all gaskets that are necessary in one package to reassemble the engine. This EST gasket set contains MLS (Multi-Layer-Steel) .030" thick head gaskets which eliminates the use of dowel pin o-rings. Base gaskets are SLS (Single-Layer-Steel) .020" thick. They have .005" of high temperature Viton rubber on both sides and are the strongest on the market. Rocker cover gaskets are also .020" thick SLS. They will not weep, extrude, tear or become brittle over time. Exhaust gaskets will not hinder exhaust gas flow and will not fray into the exhaust port. Valve seals utilize Viton rubber and outer springs for a perfect seal. With 99-10 style breather gaskets
Cometic

Cometic, EST motor gasket kit. 4" bore

#561821

Stock:Yes