Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 80 search results

Sort on:

Sort on:

Used to check and measure cylinder leakage on 4-stroke motorcycles. Works on an air compressor. Comes with dual gauges, a 35 PSI pressure gauge and a 0-100% percentage gauge. Fits spark plug holes of 14mm std, 14mm long and includes 12mm and 10mm adapters. Packed in a sturdy blow molded carrying case.

Lang Tools, dual gauge leak down tester

#517193

Stock:No

Converts between an internal and external plier with the flip of a switch. The tip kit contains a total of 5 pairs of durable, color coded, interchangeable tips. With Internal 10mm to 51mm. External 7mm to 51mm. Incl. 0.9 / 1.2 / 1.8mm straight tips. Incl. 0.9 / 1.2mm 90° angle tips.

Lang Tools, ' Quick Switch' #1434 large retaining ring plier

#514588

Stock:No

13 inch long wrench. Used to remove/install OEM 3684, the 5/16-18 T40 bolt that holds the rear fender to the frame on various FLT/Touring models.
Tire removal is not required.

Lang Tools, rear fender bolt wrench

#514619

Stock:No

Used to set correct spark plug gap with the built-in electrode gapping tools. The round wire allows correct gap measurements from all angles.
For points ignitions
Measures 0.025" to 0.045" (0.64mm to 1.14mm)

Lang Tools spark plug gauge/gapper points ignition

#516139

Stock:No

14 mm (M14 x 1.25) threaded. Cleans thread in cylinder head from dirt, carbon build-up and metal particles. Used with 5/8" socket or 3/8" drive ratchet wrench.

Lang, 14mm spark plug thread cleaner

#514346

Stock:No

12 mm (M12 x 1.25) threaded. Cleans thread in cylinder head from dirt, carbon build-up and metal particles. Used with 5/8" socket or 3/8" drive ratchet wrench.

Lang, 12mm spark plug thread cleaner

#514465

Stock:No

Used to measure and correct spark plug gap. Scaled from .020 to .080 (inch) and 0.6 to 2.0 (mm). USA made.

Lang, spark plug gap/gauge tool (mm & inch)

#514165

Stock:No

Finger drive. Incl. bit extension. 6-piece set. Mini reversible ratcheting wrench for one hand use. With very small (11cm overall length) dimensions. Accepts all regular 1/4" bits. Tool includes slotted (screwdriver) and Phillips bits.

Lang Tools, finger ratchet bit driver

#516623

Stock:No

Straight head, incl. 6 bits. Std tooth. Mini reversible ratcheting wrench with very small (11cm overall length) dimensions. Accepts all regular 1/4" bits. Tool includes slotted (screwdriver) and Phillips bits.

Lang Tools, mini ratcheting bit wrench. Straight

#514174

Stock:No

Used to test electrical connections. Retractable test lead pulls out, and stays at desired length. Includes insulated alligator clips. Rewinds in protective case when not in use. With 18 gauge (ø1.02mm / 0.82mm²) copper wire.
Magnetic housing.
3 x 10 feet red/green & black wires.

Lang Tools, retractable electrical test lead. Magnetic

#514614

Stock:No

36" (94.4cm) long. Curved pry bars manufactured from a high carbon content steel alloy with an orange nylon grip. The tip is angled for best access and leverage. With steel strike cap that is directly connected to the steel of the bar itself. Exceeds ASME (American Society of Mechanical Engineers) standards.

Lang Tools, pry bar. 36" long

#599173

Stock:No

Used to set-up correct end-play of the tapered sprocket shaft bearings in the left side crankcase

Lang, sprocket shaft bearing end-play tool

#514168

Stock:No

For 514162 rocker cover wrench For when old one in tool is worn out

Repl. 3/16 inch bits

#514166

Stock:No

Used to pull the valve stem of the inner tube through the valve stem hole in the rim, without getting fingers/hand jammed; Mounts inside valve stem

Lang Tools, inner valve tire puller tool

#514618

Stock:No

Designed for motorcycle use. Includes a metal clip that can be clipped to the gauge. The gauge can then be clipped to the bike's frame or handlebar leaving pour hands free. Includes adapters for 10mm, 12mm, 14mm and 18mm threaded spark plug holes. The gauge is 2-1/2" (6.4cm) diameter and has a dual scale dial that shows 0-300 psi and 0-21 bar.

Lang Tools, compression tester

#599155

Stock:No

5-piece ratcheting box end wrench set.
On regular accessible bolts a nut can be tightened or loosened up to 5 times faster than with a conventional wrench.
Incl. 1/4" X 5/16", 3/8" X 7/16", 1/2" X 9/16", 5/8" X 3/4" and 11/16" X 7/8"

Lang Tools Box end wrench set Conventional design US sizes

#514181

Stock:No

Used to test electrical connections. Retractable test lead pulls out, and stays at desired length. Includes insulated alligator clips. Rewinds in protective case when not in use. With 18 gauge (ø1.02mm / 0.82mm²) copper wire.
With 3 x 10 feet red/green & black wires.

Lang Tools, retractable electrical test lead, std housing

#514393

Stock:No

Used to fill the fork slider through the oil drain hole / damper tube mount hole with a vacuum pump; With M8 x 1.25 threaded nipple

Lang Tools, fork slider oil filler

#514348

Stock:No

Incl. 14 feeler blades of 4" (10.2cm) long x 1/4" (6.4mm) wide. Thickness .002" (0.05mm) to .015" (0.38mm). These straight blades can be bend for custom applications. Stored in bi-fold pocketed pouch with velcro closure.

Lang Tools, 14 blade feeler gauge blade set. US sizes

#514574

Stock:No

Lang Tools, oil pressure sending unit wrench

#514549

Stock:No