Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 35 search results

Sort on:

Sort on:

Bucket with 70 hand cleaning pre-moisturized tissues. Cleans hands, or parts, without water. Remove most greases, grimes, inks, paints and traces of adhesives. Double layer, with a smooth and abrasive side. Disinfects and leaves a fresh orange scent after use.

Loctite 7852, handcleaner wipes

#586041

Stock:Yes

5 liter can. Used to clean large surfaces like workbenches from oil and grease. Can be diluted with water. Non flammable, non toxic and biological degradable.

Loctite 7840, large surface cleaner. 5L

#586037

Stock:Yes

Stick. 19 gram. Maximum strenght (38Nm on M10) thread locker for studs and bolts that do not require disassembly. Seals threads. Up to 150°C. Disassembly with heat and handtools.

Loctite 268 red, threadlocker stick 19gr

#586010

Stock:Yes

Fluid. 50cc bottle. Medium to high strength. Low viscosity green liquid used to secure assembled set-screws and bolts M12 (1/2"). Medium to high strength (10Nm on M10) Penetrates thread by capillary action. Secures set screws after setting is completed. Seals welds and porous metals. Up to 150°C. Disassembly with heat and handtools.

Loctite 290 green, threadlocker 50cc

#586013

Stock:Yes

Fluid. 10cc bottle. Low strength thread locker. Used with small fasteners, set screws, gauges etc. Low strength (6Nm on M10). Up to 150°C. Disassembly with regular handtools.

Loctite 222 purple, threadlocker 50cc

#586002

Stock:Yes

Paste. 60cc tube. Used to improve the sealing performance of old and new pre-cut gaskets. Works with paper, cork, felt etc. and sets to a permanently flexible non hardening film of rubber. Gasoline, kersone, lubricants, water, antifreeze, weak acids, alkalis and vapour resistant. Suitable to install parts after the rubber has cured on the gaskets. Temperature range -55°C to +200°C.

Loctite 5922 gasket dressing

#586051

Stock:No

A true DIY o-ring kit that allows you to manufacture your own o-ring on the spot, with exactly the right dimension. Includes rubber strings in 5 diameters, an o-ring cutting template (with 1.6mm, 2.4mm, 3.0mm, 5.7mm and 8.4mm diameter holes), safety knife and 20 grams of Loctite 406 instant liquid adhesive. The connection in the O-ring will be as strong as the actual rubber. Complete in hardcase with instruction manual.

Loctite, DIY o-ring kit

#586050

Stock:Yes

Temp. range -54°C up to 260°C. Self fusing tape, no adhesives, non-sticky. UV, salt water, fuel, oil & acid resistant and insulates (dielectric strength up to 400 VP). Used to stretch & wrap around a surface. Will fuse to itself and makes a water & air tight seal. Perfect for imergency repairs.

Loctite, 5075 Red insulating & sealing wrap

#586003

Stock:Yes

Paste. Tube 50 gram. One component. Black steel epoxy in a tube. Cut off a section, knead, and apply to leaking pipes, damaged equipment or to smooth out welds. Up to 120°C. Cures in 10 minutes.

Loctite 3463, magic steel 50gr tube

#586035

Stock:Yes

Paste. 80cc tube. Flange sealant with excellent resistance to motor oil, transmission fluids and water / glycol. Non corrosive, low odor. Temperature range -60°C , and maximum of +350°C for short periods.

Loctite 5920 copper silicone

#586048

Stock:Yes

For syringe of 586011

Loctite 3090 repl. plastic needle tip

#586012

Stock:Yes

400cc bottle. Waterless. Removes grease, grime and oil. Contains skin conditioners. Can be used with or without water. Biological degradable.

Loctite 7850, hand cleaner 400cc

#586038

Stock:Yes

Stick. 20 gram. General use on nuts, bolts and exhaust & brake mounts. Copper based. Up to +980°C.

Loctite, 8065 Anti-Seize stick 20 grams

#586034

Stock:No

Paste, red in color. 114 gram. A flowable industrial silicone sealant that can also be used for bonding/glueing. It is high temperature resistant up to +300°C and tack free in 10 minutes. Primarily used in industrial bonding/sealing applications, heating engineering, industrial ovens, household electrical, industrial heating equipment.

Loctite, 5398 red silicone, 100cc tube

#583909

Stock:Yes

For 243 thread lockers, fits 50 and 250ml. vials. The LOCTITE Pro Pump enables clean, efficient and controlled dosing of LOCTITE threadlockers. Suitable for both 50 ml and 250 ml bottles and allows better glue delivery straight from the bottle, prevents overdose. One push of the button produces one drop Loctite at a time. Does not require installation or assembly and features a nozzle with three possible positions; 45° down, 45° up or horizontal. Nozzle folds 90° down for storage. Very small compact and light.

Loctite, 243 threadlockers Pro Pump

#923962

Stock:Yes

Fluid. 10cc bottle. Low strength thread locker. Used with small fasteners, set screws, gauges etc. Low strength (6Nm on M10). Up to 150°C. Disassembly with regular handtools.

Loctite 222 purple,threadlocker 10cc

#586001

Stock:Yes

Paste. 50cc tube. Medium strength. Paste which forms a flexible and solvent resistant seal that will not tear or decay. Typically used on transmissions and crankcases. Fills gaps up to 0.25mm on metal (including aluminum) parts. Up to 150°C.

Loctite 518 / 548 gasket eliminator. 50cc

#586021

Stock:Yes

Fluid. 50cc bottle. Medium strength. Used to seal hydraulic or pneumatic fittings up to M18. Also medium strength locker (15Nm on M10). Up to 150°C. Removal with 250°C localized heat.

Loctite 542 brown hydraulic sealer. 50cc

#586025

Stock:Yes

Fluid. 10cc bottle. Medium strength. Used to seal hydraulic or pneumatic fittings up to M18. Also medium strength locker (15Nm on M10). Up to 150°C. Removal with 250°C localized heat.

Loctite 542 brown hydraulic sealer. 10cc

#586024

Stock:Yes

10 liter can. Waterless. Removes grease, grime and oil. Contains skin conditioners. Can be used with or without water. Biological degradable.

Loctite 7850, hand cleaner 10lt

#586040

Stock:No