Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 200 search results

Sort on:

Sort on:

Includes one 6-pin kit and one 9-pin kit. Small size for a maximum number of wires requiring a minimum of space. Includes male & female connector plug housings with matching crimp-on terminal pins. 6-pin assembled connector block is approx. 35mm long x 18mm x 17mm. 9-pin connector block is approx. 35mm long x 18mm x 21mm.

Note: Dimensions are overall sizes of both male & female blocks plugged into each other.
Note: Not waterproof.

Motogadget, compact plug connector kit. 6-pins + 9-pins

#930369

Stock:No

ECE approved; aluminum; asymmetric; width 129mm, height 80mm; straight stem 150mm; resistant to oxidation, corrosion and scratches; for left side.
Note: Incl. M10 x 1.50, M10 x 1.25 left & M10 x 1.25 right bolts.

Motogadget mo.view Race left glassless mirror

#573682

Stock:No

ECE approved; aluminum; asymetric; straight stem 150mm; resistant to oxidation, corrosion and scratches; for right side.
Incl. M10 x 1.50, M10 x 1.25 left & M10 x 1.25 right bolts.

Motogadget mo.view Race right glassless mirror

#573683

Stock:No

Enables H-D models, equipped with the J1850-bus system, to control instruments and indicator lights. ABE approved. This connector makes the connection between the Motoscope Tiny and the H-D J1850-bus system. A plug & play system since it takes OEM speedo connector.
Used in combination with all Motogadget instruments (excl. Motoscope Pro).

Note: Model years as mentioned are indications only since H-D mixed and matches systems.
Note: Later models come with CAN-bus wiring. These will not fit.

Motogadget, mo.can J1850 Twin Cam connector

#930320

Stock:Yes

Simple and quick way to make a strong and positive connection of an electrical wire onto an existing wire-end. Inside crimp ring diameter 2mm, overall length 18mm.

Motogadget, cable-end crimp connector set

#930370

Stock:No

Polished taillight. ECE approved as taillight and brake light. M8 threaded with a miniature aluminum housing. At the time of introduction these mo.blaze tens are the smallest lights, for this application, in the world. The development of a special lens, offering a lateral beam, made increased visibility from an angle possible. The LEDs used are offer the highest light output available through the use of the latest LED technology. Power consumption is 1 Watt each. Dimensions: Housing 11mm long x 11mm diameter. Overall length with M8 threaded stud 29mm. Wiring length approx. 110cm. Weight with wire approx. 20 grams. Complete with installation instructions.
Note: Sold each. Order two to receive one pair.

Motogadget, mo.blaze tens2 2-1 taillight/brake light. Polish

#925371

Stock:Yes

Position light. ECE approved for front position light use. M8 threaded with a miniature aluminum housing. At the time of introduction these mo.blaze tens are the smallest lights, for this application, in the world. The development of a special lens, offering a lateral beam, made increased visibility from an angle possible. The LEDs used are offer the highest light output available through the use of the latest LED technology. Power consumption is 1 Watt each. Dimensions: Housing 11mm long x 11mm diameter. Overall length with M8 threaded stud 29mm. Wiring length approx. 110cm. Weight with wire approx. 20 grams. Complete with installation instructions.
Note: Sold each. Order two to receive one pair.

Motogadget, mo.blaze tens5 front position light. Polished

#925377

Stock:Yes

ECE approved; handlebar end mirror; aluminum; 129mm wide x 80mm high; Stem length 180mm. Motogadget mo.view mirrors are glassless. CNC machined from aluminum and finish-anodized, but a regular glass lens is not used. Instead the patented mirror surface is convex cut directly from the aluminum. This is done with ultra-precision diamond tools using a special ´flycutting´ procedure after which it is made corrosion and scratch resistant by a special vacuum plasma coating process. Available in regular and handlebar-end mirrors. Left & right side compatible, except where noted, allows above or below bar end installation and mounts directly onto or into 22mm or 1" diameter handlebars. Body thickness approx. 4.2mm without ball head.
Note: Installation compatible with Motogadget bar end turn signals, the mo.grip and the push button controls mo.switch and mo.switch mini.
Note: Installs to all M10 holes. Incl. M10 x 1.50, M10 x 1.25 left & M10 x 1.25 right bolts.

Motogadget mo.view Race XL glassless mirror black left

#583920

Stock:No

Used with 930269 Motoscope pro only

Motogadget, breakout box J1850 XL Molex

#930312

Stock:Yes

ECE approved; handlebar end mirror; Aluminum; 129mm high x 80mm wide; Stem length 180mm. Motogadget mo.view mirrors are glassless. CNC machined from aluminum and finish-anodized, but a regular glass lens is not used. Instead the patented mirror surface is convex cut directly from the aluminum. This is done with ultra-precision diamond tools using a special ´flycutting´ procedure after which it is made corrosion and scratch resistant by a special vacuum plasma coating process. Available in regular and handlebar-end mirrors. Left & right side compatible, except where noted, allows above or below bar end installation and mounts directly onto or into 22mm or 1" diameter handlebars. Body thickness approx. 4.2mm without ball head.
Note: Installation compatible with Motogadget bar end turn signals, the mo.grip and the push button controls mo.switch and mo.switch mini.
Note: Installs to all M10 holes. Incl. M10 x 1.50, M10 x 1.25 left & M10 x 1.25 right bolts.

Motogadget mo.view Race XL glassless mirror black right

#583921

Stock:No

Motogadget, Speedo Sensor BMW Boxer Aircooled

#963333

Stock:Yes

Used with 930269 Motoscope pro only

Motogadget, breakout box J1850 VRSC

#930313

Stock:Yes

Used with 930269 Motoscope pro only

Motogadget, breakout box J1850 Twin Cam

#930310

Stock:Yes

Enables H-D models, equipped with the J1850-bus system, to control instruments and indicator lights. ABE approved. This connector makes the connection between the Motoscope Tiny and the H-D J1850-bus system. A plug & play system since it takes OEM speedo connector.
Used in combination with all Motogadget instruments (excl. Motoscope Pro).

Note: Model years as mentioned are indications only since H-D mixed and matches systems.
Note: Late models come with CAN-bus wiring. These will not fit.

Motogadget, mo.can J1850 XL Molex connector

#930322

Stock:Yes

Used with 930269 Motoscope pro only

Motogadget, breakout box j1850 XL Deutsch

#930311

Stock:Yes

Vintage brass.
Used to stylish mount the Motoscope Tiny to a 1" (25.4mm) diameter handlebar.
Complete with stainless steel mounting screws.
- Brass.
- For 1" handlebars.
- 56mm diameter
- 60mm long

Motogadget, Tiny mount cup 'Vintage Brass' 1". Black

#930249

Stock:No

Polished CNC machined billet aluminum.
For 22mm diameter handlebars.
Used to mount the Motoscope Mini (MSM) digital instrument gauge on the handlebar together with the Combi Frame (930277 polished or 930280 black anodized).
The handlebar must be drilled.
Comes with the mounting plate and the required screws.
Note: The Combi Frame and the Motoscope Mini are not included.

Motogadget, MSM bolt-on handlebar bracket. 22mm. Polished

#830105

Stock:Yes

Black anodized Contrast Cut machined billet aluminum.
Used to stylish mount the Motoscope Tiny to a 1" diameter handlebar.
Complete with stainless steel mounting screws.
- Black anodized.
- For 1" handlebars.
- 56mm diameter
- 60mm long

Motogadget, Tiny mount cup 'Grooved' 1". Black CC

#930256

Stock:No

Polished aluminum.
2-piece clamp kit for 22mm diameter handlebars.
Used to mount the Motoscope Mini to the handlebars.
No drilling required.

Motogadget, Motoscope Mini handlebar clip kit. 22mm. Pol.

#930197

Stock:Yes

Black anodized.
Bracket 'A style'.
Universal precision laser-cut 2.5mm thick aluminum bracket to mount the Motoscope Mini to your bike.
Can be cut and drilled to suit your specific application.
Overall dimensions approx. 10cm high x 9cm wide.

Motogadget mounting bracket for Motoscope Mini, black

#930201

Stock:Yes