Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 53 search results

Sort on:

Sort on:

Olive green RAL 6003. 10 liter. 2.92kg. 345x165x275mm high. For liquid fuels. Manufactured from steel sheet material that is of a welded design. The jerrycan is externally and internally painted to help prevent rust. Classic safe lock with cotter pin. UN approved.

Note: For optional discharge spouts see 599736 rigid and 599737 flexible. For a replacement rubber gasket see 599739.
Note: As of 01.06.2015, all fuel cans (UN) must be marked by the end user in accordance with the GHS / CLP Regulation. For identification the correct diesel or gasoline labels must be used.
Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Pressol, metal jerrycan. Olive green, 10 liter

#599719

Stock:Yes

1000cc. 200mm to 125mm diameter x 285mm high. White/transparent polyethylene container with an adjustable and closeable brass nozzle. Sprays 0.75cc per stroke. Recommended for use with water.

Note: Not suitable for acetone, glycol, ammonia, brake cleaners and acids like formic acid, acetic acid, or chemical products.

Pressol, industrial water spayer. Clear, 1 liter

#599698

Stock:Yes

Self-closing brass valve with G 3/4" male connecting threads on both sides. With cord sealing and lever operated.
Approx. dimensions: 70mm long x 38mm wide x 80mm high.

Pressol, barrel tap G 3/4" male. Brass

#599716

Stock:Yes

Workshop spray can for solvents with a separate hand pump and spray knob. Used for ketone fluids, such as acetone and most of the hydrocarbons, as well as all low viscosity oils, cold cleaners, brake cleaners, thinners, silicone removers and alcohols such as isopropyl.
Comes with a transparent HDPE (high density polyethylene) 1.5 liter container, that can be filled to a maximum of 1.2 liters, and comes with a scale in ml.
Max. 2.5 bar, with over-pressure / venting valve. With a PA (polyamide) pump head and a PA flat spray nozzle with a 110° spray angle that sprays up to 192ml/min.
Temperature range +5°C to +30°C. Dimensions: Base 230mm x 120mm x 325mm high. Weight 0.45kg.

Pressol, SPRAYFlxx solvent plus, 1.5 liter spray can

#599728

Stock:Yes

Copper. 55 gram. Cures in 5 minutes. A two component epoxy resin reinforced with metal powder. The chemical components are matched to form the best bond to the materials that are to be joined or repaired and offer a durable and quick solution for metal repairs without cracking or twisting. When cured it can be filed, drilled, tapped and painted. Idées-Fix is weatherproof, resistant to CFC (chlorofluorocarbons), solvents and high temperatures.

Pressol, Idées-Fix moldable metal. Copper, 55 grams

#599730

Stock:Yes

250mm diameter. With a 60mm ø female threaded drum adapter for plastic containers. Red HDPE (high density polyethylene) with a black lockable cover. With a high flow zinc die-cast adapter. Perfect for waste oil or chemical disposals. With lockable cover. Dimensions: 250mm diameter x 210mm high.

Pressol, 250mm dia. funnel with lid 3.2 liter. 60mm

#599687

Stock:Yes

Olive green RAL 6003. 5 liter. 1.7kg. 310x120x230mm high. For liquid fuels. Manufactured from steel sheet material that is of a welded design. The jerrycan is externally and internally painted to help prevent rust. Classic safe lock with cotter pin. UN approved.

Note: For optional discharge spouts see 599736 rigid and 599737 flexible. For a replacement rubber gasket see 599739.
Note: As of 01.06.2015, all fuel cans (UN) must be marked by the end user in accordance with the GHS / CLP Regulation. For identification the correct diesel or gasoline labels must be used.
Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Pressol, metal jerrycan. Olive green, 5 liter

#599718

Stock:Yes

750cc. 313mm high x 100mm diameter. Red HDPE (high density polyethylene) container with a black spray head made from special plastic. Sprays 1.4cc per stroke with a 50° spray angle. Recommended for use with thin liquids as lubricants, disinfectants, brake cleaners, cleaners from industrial and automotive industry areas. Allows use, with the container in a horizontal position, through a special plastic suction hose. It is advised to thoroughly flush the system with clean water after use.

Pressol, industrial fluid sprayer. Red, 750cc

#599700

Stock:Yes

500cc with 165mm spout. Dimensions: 350mm high x 135mm to 70mm diameter. White HDPE (high density polyethylene) container with double-acting brass/zinc pump and an angled aluminum spout. Robust and virtually impact proof. The ball bearing mounted and gravity controlled suction tub enables the container to be almost completely emptied. Pump enables drip feed. With 2 ball valves. Sealing mechanism comes with drip collector pan.

Note: For optional parts see 599694 spout with micro sprayer and 599695 spout with applicator brush.

Pressol workshop oiler, white with spout. 500 ml

#599693

Stock:Yes

11 liter black polyethylene fill can for engine coolant. 75mm filler opening with sealing cap and strainer. 32cm high, base 65cm x 20cm. Weight 0.6kg.

Pressol, coolant fill can. Black, 11 liter

#599720

Stock:Yes

Fits the optional 599736 rigid and 599737 flexible discharge spouts for 599718 5 liter, 599719 10 liter, 599734 20 liter and 599735 20 liter metal jerrycans.

Pressol, repl. rubber gasket for metal discharge spouts

#599739

Stock:Yes

1000cc. 341mm high x 110mm diameter. Red HDPE (high density polyethylene) container with a black spray head made from special plastic. Sprays 1.4cc per stroke with a 50° spray angle. Recommended for use with thin liquids as lubricants, disinfectants, brake cleaners, cleaners from industrial and automotive industry areas. Allows use, with the container in a horizontal position, through a special plastic suction hose. It is advised to thoroughly flush the system with clean water after use.

Pressol, industrial fluid sprayer. Red, 1000cc

#599701

Stock:Yes

For use with 400 gram grease cartridges, according to DIN 1284.

Pressol, follower plate grease cartridge

#599717

Stock:Yes

Fits the metal safe cap of 599718 5 liter, 599719 10 liter, 599734 20 liter and 599735 20 liter metal jerrycans.

Pressol, repl. rubber gasket for metal jerrycans

#599738

Stock:Yes

5 liter, UN approved. Robust, rust free and impact resistant HDPE (high density polyethylene) fuel can that is red RAL 3001 with a steel gray RAL 7011 polypropylene screw-on cap, which is secured with a LDPE (polyethylene of low density) strap against loss. Complete with a flexible 175mm long clear discharge spout of LDPE, with integrated ventilation, that can be stored inside the fuel container. Dimensions compatible with military jerrycans. Dimensions: 331mm x 185mm base and 237mm high. Weight just 0.64kg.

Note: As of 01.06.2015, all fuel cans (UN) must be marked by the end user in accordance with the GHS / CLP regulation. For identification the correct diesel or gasoline labels must be used.

Pressol, HDPE fuel can. Red, 5 liter

#599723

Stock:Yes

500cc. 281mm high x 90mm diameter. Red HDPE (high density polyethylene) container with a black spray head made from special plastic. Sprays 1.4cc per stroke with a 50° spray angle. Recommended for use with thin liquids as lubricants, disinfectants, brake cleaners, cleaners from industrial and automotive industry areas. Allows use, with the container in a horizontal position, through a special plastic suction hose. It is advised to thoroughly flush the system with clean water after use.

Pressol, industrial fluid sprayer. Red, 500cc

#599699

Stock:Yes

Optional spout for workshop oilers with applicator brush. Used to apply a consistent lubricant film over a larger area.
Dimensions 15mm diameter x 135mm long

Note: Compatible with Pressol 599691, 599692 and 599693 workshop oilers.

Pressol, spout with applicator brush

#599695

Stock:Yes

Compatible with 60, 200 and 220 liter barrels with G 2" male threads. Compatible with oils up to SAE 50, diesel, petroleum, kerosene, glycerin and undiluted antifreeze. 0.4 liter per stroke, at 60 strokes per minute 24 liters pumping capacity. Pump body is manufactured from ABS + PA 6, seals from FKM + HNBR and the metal parts are zinc plated steel. The suction tube is telescopic and adjustable from 35cm to 95cm in length. The discharge hose is 150cm long and comes with a steel discharge spout. Easy installation. Weight 1.24kg.

Pressol, barrel pump 24 liter/min. G 2" threaded

#599715

Stock:Yes

20 liter, UN approved. Robust, rust free and impact resistant HDPE (high density polyethylene) jerrycan that is dark gray RAL 7021 with a red RAL 3001 polypropylene screw-on cap, which is secured with a LDPE (polyethylene of low density) strap against loss. Complete with a flexible 245mm long clear discharge spout of LDPE, with integrated ventilation, that can be stored inside the jerrycan. Dimensions compatible with military jerrycans. Dimensions: 350mm x 175mm base and 48cm high. Weight just 1.45kg.

Note: As of 01.06.2015, all fuel cans (UN) must be marked by the end user in accordance with the GHS / CLP regulation. For identification the correct diesel or gasoline labels must be used.

Pressol, HDPE army fuel can. Dark gray, 20 liter

#599722

Stock:Yes

Black with regular 2-handed grip style. Pressure up to 400 bar. Takes 400 gram grease cartridges. Grease supply is adjustable from 0.1ml. to 2.15ml. per stroke Pressure side is M10x1.00 threaded. With a 300mm long x 11mm diameter high pressure hose with a precision machined 4 claw coupler that is M10x1.00 male threaded. Operates with NLGI 2 greases at at least 10°C and includes 10 follower plates. Quantity of delivered grease at a back-pressure of 200 bar nearly unchanged after 40.000 operating cycles. Pump piston, cylinder and O-ring with 6 μ fit (no dummy lubrication). Dimensions: 330mm x 140mm x 66mm diameter. Weight 1.02kg.

Pressol, EasyFill dual handed grease gun. Black

#599733

Stock:Yes