Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 132 search results

Sort on:

Sort on:

Made of 2mm thick quality raw (uncoated) steel that may require small fitment modifications. Used to install on the frame and cover the internals of the bike, when a solo seat is installed. Installation will require cutting of the rear frame. Also requires custom fabrication of two installation points on the frame for installation of this cover.

Westland Custom, solo seat mount frame cover. Raw steel

#923872

Stock:Yes

High quality steel crash bars / engine guards. Manufactured of 1-1/4" (32mm) cold-band steel tubing (Certified EN 10305-3 CR1 E195 S5) with 2mm wall thickness. Complete with installation hardware.

Note: For protection in tip-over events only. Not designed to offer safety in high speed crashes.

Westland Customs engine guard, chrome

#923830

Stock:No

High quality steel crash bars / engine guards. Manufactured of 1-1/4" (32mm) cold-band steel tubing (Certified EN 10305-3 CR1 E195 S5) with 2mm wall thickness. Complete with installation hardware.

Note: For protection in tip-over events only. Not designed to offer safety in high speed crashes.

Westland Customs engine guard, chrome

#923794

Stock:Yes

High quality steel crash bars / engine guards. Manufactured of 1-1/4" (32mm) cold-band steel tubing (Certified EN 10305-3 CR1 E195 S5) with 2mm wall thickness. Complete with installation hardware.

Note: For protection in tip-over events only. Not designed to offer safety in high speed crashes.

Westland Customs engine guard, chrome

#923831

Stock:Yes

High quality steel crash bars / engine guards. Manufactured of 1-1/4" (32mm) cold-band steel tubing (Certified EN 10305-3 CR1 E195 S5) with 2mm wall thickness. Complete with installation hardware.

Note: For protection in tip-over events only. Not designed to offer safety in high speed crashes.

Westland Customs engine guard, chrome

#923795

Stock:Yes

High quality steel crash bars / engine guards. Manufactured of 1-1/4" (32mm) cold-band steel tubing (Certified EN 10305-3 CR1 E195 S5) with 2mm wall thickness. Complete with installation hardware.

Note: For protection in tip-over events only. Not designed to offer safety in high speed crashes.

Westland Customs engine guard, chrome

#923797

Stock:Yes

Stainless steel. This riser stud kit makes it possible to mount US 1/2-13 threaded risers to most Japanese and European bikes.
1/2"-13 x 3/4" to M12 x 50 mm.
Body diameter (hole in triple clamp): 12 mm.
Total length: 90 mm.
Kit includes 2 bushings, 2 lock nuts.
Easy to install

Westland Customs, US to Metric riser stud kit. 1/2-13 to M12

#941567

Stock:No

Black. With an extra long bracket allowing additional forward/backward adjustment options. Not designed for use with a taillight and license plate illumination must be ordered separately. For Dutch (NL) and Belgian (B) license plates measuring 145mm x 210mm. Made from 1.5mm thick aluminum, with a black wrinkle powder coated finish. For left and right side use. The horizontal elongated mounting holes allow further horizontal adjustments for a snug fit on the bike. The L-shaped mount bracket is 35mm wide and made of 6mm thick material.

Note: License plate illumination not included and must be ordered separately.
Note: Not designed for installation of a taillight.
Note: Available with a series of different mounting point diameters to best suit your specific application.
- 923759 10.5mm mount hole. Lower shock mount for most Japanese bikes.
- 923760 13mm mount hole. Lower shock mount for many H-D models.
- 923761 20mm mount hole. Wheel axle mount for many pre-2013 H-D models & customs with 3/4" (19mm) wheel axle.
- 923762 26mm mount hole. Wheel axle mount for many 00-up H-D models & Customs with 1" (25.4mm) or 25mm wheel axle.

Westland Customs, side mount license plate bracket NL/B

#923759

Stock:Yes

Black. With an extra long bracket allowing additional forward/backward adjustment options. Not designed for use with a taillight and license plate illumination must be ordered separately. For Dutch (NL) and Belgian (B) license plates measuring 145mm x 210mm. Made from 1.5mm thick aluminum, with a black wrinkle powder coated finish. For left and right side use. The horizontal elongated mounting holes allow further horizontal adjustments for a snug fit on the bike. The L-shaped mount bracket is 35mm wide and made of 6mm thick material.

Note: License plate illumination not included and must be ordered separately.
Note: Not designed for installation of a taillight.
Note: Available with a series of different mounting point diameters to best suit your specific application.
- 923759 10.5mm mount hole. Lower shock mount for most Japanese bikes.
- 923760 13mm mount hole. Lower shock mount for many H-D models.
- 923761 20mm mount hole. Wheel axle mount for many pre-2013 H-D models & customs with 3/4" (19mm) wheel axle.
- 923762 26mm mount hole. Wheel axle mount for many 00-up H-D models & Customs with 1" (25.4mm) or 25mm wheel axle.

Westland Customs, side mount license plate bracket NL/B

#923760

Stock:Yes

Used to move the turn signals to the frame down-tubes, below the fuel tank. Bracket tube is hollow to route wiring and 8mm threaded for use with all custom turn signals that have 8mm threads. Complete with installation hardware. Gloss black powder coated steel.
Note: Not compatible with engine guards.

Westland Customs, front turn signal bracket 28cm. Black

#941550

Stock:Yes

Used to move the turn signals to the frame down-tubes, below the fuel tank. Bracket tube is hollow to route wiring and 8mm threaded for use with all custom turn signals that have 8mm threads. Complete with installation hardware. Gloss black powder coated steel.
Note: Not compatible with engine guards.

Westland Customs, front turn signal bracket 22cm. Black

#941551

Stock:Yes

Aluminum sheet metal plate. Dimensions: 28cm wide x 70cm long x 3mm thick. Used to fabricate a base plate for your seat or for the frame when running a solo. Easy to bend and cut with a jigsaw.

Westland Customs, DIY aluminum seat base plate

#923777

Stock:Yes

High quality steel crash bars / engine guards. Manufactured of 1-1/4" (32mm) cold-band steel tubing (Certified EN 10305-3 CR1 E195 S5) with 2mm wall thickness. Complete with installation hardware.

Note: For protection in tip-over events only. Not designed to offer safety in high speed crashes.

Westland Customs engine guard, chrome

#923799

Stock:No

Ultra Ape bars come in an extra thick 38mm (1-1/2") diameter, have a 32mm (1-1/4") diameter riser clamp area and a 1" (25.4mm) grip area. With a powder coated satin gloss black finish. Nothing better than an apehanger to feel true freedom. From style to quality, these EU made Westland bars tick all the boxes!
Note: Cables / wiring / brake lines may require extending.
- 1-1/2" (38mm) diameter handlebar
- 1-1/4" (32mm) diameter riser clamp area
- 1" (25.4mm) diameter grip area
- Slotted/pre-drilled for internal wiring
- Notched for H-D e-throttle (TBW / Throttle By Wire)
- Made of 38x3mm, 32x3mm and 25.4x2mm EN 10305-3 CR1 E195 S5 certified cold rolled steel tubing
- Precision TIG welded
- Dimensions 30cm (12") high handlebar in mm: A= 900, B= 300, C= 260, D= 250, E= 155, F= 350, G= 200

Westland Customs, 1-1/2" Ultra Ape. Black. 12" high

#703831

Stock:Yes

Ultra Ape bars come in an extra thick 38mm (1-1/2") diameter, have a 32mm (1-1/4") diameter riser clamp area and a 1" (25.4mm) grip area. With a powder coated satin gloss black finish. Nothing better than an apehanger to feel true freedom. From style to quality, these EU made Westland bars tick all the boxes!
Note: Cables / wiring / brake lines may require extending.
- 1-1/2" (38mm) diameter handlebar
- 1-1/4" (32mm) diameter riser clamp area
- 1" (25.4mm) diameter grip area
- Slotted/pre-drilled for internal wiring
- Notched for H-D e-throttle (TBW / Throttle By Wire)
- Made of 38x3mm, 32x3mm and 25.4x2mm EN 10305-3 CR1 E195 S5 certified cold rolled steel tubing
- Precision TIG welded
- Dimensions 41cm (16") high handlebar in mm: A= 900, B= 410, C= 370, D= 250, E= 155, F= 350, G= 200

Westland Customs, 1-1/2" Ultra Ape. Black. 16" high

#703833

Stock:Yes

With a 'square bend' frame hoop with 90° bends. Used to modify the rear frame when installing a café racer, or similar, seat that requires frame modifications. Excellent weldable high quality steel with quality bends. Includes a 1x frame hoop (1" / 25.4mm diameter x 60cm long x 24cm max. width), 2x upright tubes (1" (25.4mm) diameter x 60cm long) and 2x support strips (25mm wide x 4mm thick x 25cm long).

Note: See 923775 for the 'Round bend' frame hoop set.

Westland Customs, DIY 1" frame tube set B

#923776

Stock:Yes

Satin gloss black powder coated finish to best match frame gloss. High quality steel crash bar / engine guard. Manufactured of 1-1/4" (32mm) cold-band steel tubing (Certified EN 10305-3 CR1 E195 S5) with a 2mm wall thickness.

Note: For protection in tip-over events only. Not designed to offer safety in high speed crashes.

Westland Customs, engine guard. Black

#923849

Stock:No

Black. For French license plates measuring 210mm x 130mm. Not designed for use with a taillight. License plate illumination must be ordered separately as 943294. Made from 1.5mm thick steel, with a black wrinkle powder coated finish. For left and right side use. The horizontal elongated mounting holes allow further horizontal adjustments for a snug fit on the bike. The L-shaped mount bracket is 35mm wide and made of 6mm thick steel.
Note: Not designed for installation of a taillight.
Note: License plate illumination light is not included and can be ordered separately as 943294.

Westland Customs, side mount license plate bracket France

#941558

Stock:No

Satin gloss black powder coated finish to best match frame gloss. High quality steel crash bar / engine guard. Manufactured of 1-1/4" (32mm) cold-band steel tubing (Certified EN 10305-3 CR1 E195 S5) with a 2mm wall thickness.

Note: For protection in tip-over events only. Not designed to offer safety in high speed crashes.

Westland Customs, engine guard. Black

#923837

Stock:No

4mm thick laser cut raw steel. Universal weld-on brackets for passenger footpeg installation on many bikes. Overall width 128mm, overall length 103mm. With 8.5mm mounting holes.

Westland Customs, weld-on passenger footpeg brackets

#923854

Stock:Yes