Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 2590 search results

Sort on:

Sort on:

To enhance the visibility and add a touch of modern flair to these iconic Chief Bobber and Super Chief motorcycles, Killer Custom offers front LED turn signals as a "must have" accessory. These turn signals feature bright, high-intensity LED lights that provide excellent visibility in all lighting conditions, making them an essential safety feature.

Lights holds ECE approval and possesses comprehensive legal documentation, affirming its suitability for road use, assuring safety, and compliance with regulatory standards. Drive confidently with peace of mind.

Killer Custom, Front Led Turn Signals. Black

#708958

Stock:Yes

Used to install motorcycle lights as turn signals, tail/brake lights and position lights. Offers an electronic universal installation solution. Compatible with all motorcycles, from classics to bikes equipped with the latest operating systems.
- Electronic universal solution for motorcycle lights such as indicators, tail/brake light and position light
- Compatible with classic bikes, new models and modern operating systems
- Correct flashing frequency
- No error messages in the cockpit
- No disruptive quiescent currents
- Installation of indicators with higher power consumption [watts] than original
- Installation of indicators with lower power consumption [watts] than original
- Installation of indicators with higher voltage [Volt] than original
- Installation on motorcycles with minus-switched indicators
- Installation on motorcycles with current-controlled indicators

Kellerman, i.Nex Equalizer.8V

#997706

Stock:Yes

This heavy-duty silicone rubber seal is designed to replace the factory-installed seal on Harley-Davidson TSM (Turn Signal Module) and TSSM (Turn Signal Security Module) wire harness plug. When replacing the TSM, Custom Dynamics strongly recommends replacing the original seal to maintain a secure, watertight connection and protect the unit from moisture-related damage.
Used on both OEM and Custom Dynamics 709103, 709104, 709105 and 709106 TSM (turn signal modules)

Custom Dynamics, Replacement Seal for TSM/TSSM Connector

#709107

Stock:Yes

Black. Without license plate bracket.
Replaces the stock turn signal bar and allows the license plate to be mounted below the taillight, to emphasize the low-down look of your bagger. The extra narrow turn signal bar has built-in license plate illumination, a special trim will cover the mounting holes of the stock license plate mounting holes for the finishing touch. Incl. turn signal bar, amber turn signals but does not include the license plate holder.
OEM replacement reference 53702-04A.
Note: 99-E03 models will require the separate purchase of MCS 514106 taillight socket.
Note: See 501122 for Bullet turn signal bar with license plate bracket.

Bullet turn signal bar, without license plate relocation kit

#708976

Stock:Yes

Dual intensity yellow running light with full contrast DOT compliant yellow turn signal. Yellow faceted lens.
High performance LED front turn signal assembly to replace the OEM turn signal with an aggressive styled housing in a gloss black finish. Units are equipped with plug & play JAE connector for quick and simple 100% plug and play installation. Bolts directly to your Road Glide’s inner fairing using the provided hardware.
- Faceted lens offers dual intensity running light
- Front facing turn signal assembly to replace the OEM turn signals
- High performance LED
- Aggressive fin-styled housing
- Decorative metal rivets complete the look with a rugged, industrial appeal
- Gloss black finish
- Plug and play JAE connector for quick and simple 100% plug and play installation
- Housing dimensions: 2.08” (50mm) long x 2.08” (50mm) high x 1.78” (45mm) deep
Note: No ECE approval.

Custom Dynamics, Shark Demon Selective front turn signals

#717772

Stock:Yes

White running light that switches to amber turn signal. Smoke lens.
High performance LED front turn signal assembly to replace the OEM turn signal with an aggressive styled housing in a gloss black finish. Units are equipped with plug & play JAE connector for quick and simple 100% plug and play installation. Bolts directly to your Road Glide’s inner fairing using the provided hardware.
- Faceted lens offers dual intensity running light
- Front facing turn signal assembly to replace the OEM turn signals
- High performance LED
- Aggressive fin-styled housing
- Decorative metal rivets complete the look with a rugged, industrial appeal
- Gloss black finish
- Plug and play JAE connector for quick and simple 100% plug and play installation
- Housing dimensions: 2.08” (50mm) long x 2.08” (50mm) high x 1.78” (45mm) deep
Note: No ECE approval.

Custom Dynamics, Shark Demon Selective front turn signals

#717773

Stock:Yes

Custom Dynamics, Led center fairing vent. Black

#720244

Stock:Yes

Silver anodized.
Mounts to 47-49mm diameter forks.
The perfect way to install small EC approved front turn signals that go virtually unnoticed, until activated! Homogeneously bright LED units assure excellent visibility in traffic. The HeinzBikes 'Stairs' is a 2-piece locking system, allowing installation without disassembling the fork. Housing are CNC machined aluminum with an anodized finish for lasting good looks.
- CNC machined aluminum housings
- Anodized finish
- Homogeneously bright LED
- Excellent visibility in traffic
- 2-piece construction
- No fork disassembling required
- 10-minute install

NewOrdered On Demand

HeinzBikes, ZC-Line Classic LED fork turn signal set. Silver

#707983

Stock:Yes

Experience superior safety and style with our taillight/turn signals, equipped with high-intensity LED lights for enhanced visibility in any lighting condition. The streamlined design perfectly complements your bike's aesthetics, guaranteeing a head-turning look.

Lights holds ECE approval and possesses comprehensive legal documentation, affirming its suitability for road use, assuring safety, and compliance with regulatory standards. Drive confidently with peace of mind.

Killer Custom, Mohawk Rear LED Taillight / Turn Signal Combo

#708959

Stock:Yes

With a single intensity Selective Yellow LED turn signal only setup behind an authentic SAE selective yellow lens.
DOT-compliant.
Premium integrated LED illuminated front turn signal vents, designed to replace the non-illuminated vented speed plates in the Custom Dynamics Shark Demon® 2 Road Glide head lamp kit (MCS 720025 or MCS 720026) , which are sold separately. These turn signal vents will not fit stock or any other aftermarket headlamp kit.
Features a gloss black assembly with bold, race-inspired fin styling, decorative mesh with a modern look and enhanced safety. Factory air flow is retained.
- Decorative mesh
- Bolt on installation
- Plug & Play.
Note: Compatible with Shark Demon® kits MCS 720025 or MCS 720026 only and is not compatible with any other stock or aftermarket LED headlamp kit.

Custom Dynamics, turn signal LED vent inserts. Front. Black

#719368

Stock:Yes

White headlamp / Yellow fog dual headlamp upgrade kit.
This white/yellow combo kit includes a bright white, DOT compliant LED headlamp with a low beam of three projection-style LEDs and a high beam which adds four additional direct-reflective LEDs boasting an impressive 9080 raw/3216 effective lumens.
An SAE compliant, selective yellow fog lamp provides an additional 8050 raw/2050 effective lumens and riding clarity like you’ve never experienced before. Lamp assemblies are completely sealed IP67, waterproof with polycarbonate lens and gloss black aluminum housing.
Shark Demon LED headlamps offer high-performance illumination, specialized for motorcycle on road use with unmatched beam pattern and durability.
Complete with non-illuminated vents.
Note: Requires removal of OEM turn signals.
Note: See the optional LED lighted turn signal vent inserts 719368 (amber turn & white run) or 719369 (selective yellow turn signal with selective yellow lens) for further upgrading your Road Glide. Note that these lighted vent inserts replace the stock non-illuminated vent inserts, they are compatible with the 720025 white / white headlamp kit and 720026 white headlamp / yellow fog lamp Custom Dynamics V2 Shark Demon headlamp kits only.
Note: See 719370 for the optional Plug & Play Custom Dynamics load equalizer. Designed for used in combination with 720025 and 720026 V2 Shark Demon dual headlamp kits, which require the removal of the OEM turn signals. Prevents trouble codes.

Custom Dynamics, Shark Demon LED headlamp kit. White/yellow

#720026

Stock:Yes

The Indian Scout is a modern classic cruiser known for its stylish design and exceptional performance. Killer Custom offers a rear LED taillight and turn signal combo as an optional accessory to enhance safety and improve the bike's visibility. This taillight and turn signal combo features high-intensity LED lights that provide bright, clear visibility in all lighting conditions.

Lights holds ECE approval and possesses comprehensive legal documentation, affirming its suitability for road use, assuring safety, and compliance with regulatory standards. Drive confidently with peace of mind.

Killer Custom, Mohawk Led Rear Taillight / Turn Signal Comb

#708942

Stock:Yes

ECE & DOT approved.
With a switchable white/amber (orange) colored halo-ring.
Economical high/low beam LED conversion head lamp unit to replace the stock H4 unit.
LEDs are an improvement at all levels when compared to H4 lighting and offer more effective and whiter light at 6000K, much better reliability and less amperage draw.
- White / amber switchable halo-ring/position light
- Unit comes complete with wiring with a 3-prong plug that is identical to a standard H4 light bulb, allowing a plug & play conversion
- Compatible with left side (UK) & right side (EU) riding
- 176mm (6.95") diameter
- 97.5mm (3.84") deep
- 6500K color temperature
- 12-Volt DC.
- Passing beam 20W
- Driving beam 35W
- Halo ring/position light 108 LEDs 1.6W

NOTE: Not available for sale in Germany

Bright, 7" LED headlamp. Chrome

#708756

Stock:No

Black reflector.
ECE & DOT approved. With switchable white/amber LED halo-ring/position light/DRL. Economical high/low beam LED conversion head lamp unit to replace the stock H4 unit. LEDs are an improvement at all levels when compared to halogen lighting and offer more effective and whiter light at 6500K, much better reliability and less amperage draw.
- Compatible with right side (EU) riding only
- Theoretical power 84W@high beam, 54W@low beam
- Color temperature 6500K
- Diameter 174.5mm / 6.87"
- Depth 104mm / 4.09"
- With white / amber halo ring.

Note: Not suitable for left side riding (UK), for right side (EU) riding only.
Note: Not available for sale in Germany

Bright, 7" Doubler LED headlamp unit. Black

#708758

Stock:No

- For rear use only
- Includes taillight, brake light and turn signal function
- ECE approved smoke plastic lens
- LED lighted
- 12V DC
- Zinc alloy housing
- Dimensions 24mm x 18mm.
Note: See 709915 (chrome) or 709916 (black) for front/rear turn signals with turn signal function only.

Mini Q, 3-1 taillight/turn signal combo. Black

#709030

Stock:Yes

- For rear use only
- Includes taillight, brake light and turn signal function
- ECE approved smoke plastic lens
- LED lighted
- 12V DC
- Zinc alloy housing
- Dimensions 24mm x 18mm.
Note: See 709915 (chrome) or 709916 (black) for front/rear turn signals with turn signal function only.

Mini Q, 3-1 taillight/turn signal combo. Chrome

#709029

Stock:Yes

Upgrade your ride and own the night with Shark Demon® LED Fog Lights. These lights bring aggressive, industrial styling to your bike, perfectly complementing Shark Demon® headlights with signature fins and exposed screws for a bold, mechanical look. The gloss black aluminum housing delivers a sleek yet rugged aesthetic, combining lightweight strength and lasting durability with a high-end finish. Impact- and scratch-resistant polycarbonate lenses shield against road debris and tough riding conditions, keeping your lights crystal clear mile after mile.

Each pair delivers a powerful 4140 raw lumens (2080 effective lumens), flooding the road with brilliant light to dramatically enhance nighttime visibility and riding safety. Choose your ideal beam: crisp, daylight white (5800-6500K, clear lens) for unmatched clarity in city riding or clear weather, or selective yellow (2900-3100K, yellow lens) to cut through fog, rain, and snow by reducing glare and boosting contrast. Shark Demon® LED Fog Lights are fully SAE and ECE compliant for on-road use, and the IP67 waterproof rating ensures they're sealed tight against water and dust for all-weather reliability. The adjustable beam design provides flexible vertical or horizontal mounting, letting you direct light exactly where you need it most.

Installation is effortless with the included plug-and-play wiring harness—achieve a clean, tool-light setup in no time, right under your seat with integrated on/off switch with 5 ft wire length for operation. Plus, with a wide range of compatible mounting solutions available (sold separately), these lights securely fit virtually any Harley-Davidson®. Combining bold style, advanced engineering, and road-tested performance, Shark Demon® LED Fog Lights are the ultimate upgrade for riders who demand more. Patents pending.

Custom Dynamics, Shark Demon LED Fog Lights. White

#721119

Stock:Yes

Upgrade your ride and own the night with Shark Demon® LED Fog Lights. These lights bring aggressive, industrial styling to your bike, perfectly complementing Shark Demon® headlights with signature fins and exposed screws for a bold, mechanical look. The gloss black aluminum housing delivers a sleek yet rugged aesthetic, combining lightweight strength and lasting durability with a high-end finish. Impact- and scratch-resistant polycarbonate lenses shield against road debris and tough riding conditions, keeping your lights crystal clear mile after mile.

Each pair delivers a powerful 4140 raw lumens (2080 effective lumens), flooding the road with brilliant light to dramatically enhance nighttime visibility and riding safety. Choose your ideal beam: crisp, daylight white (5800-6500K, clear lens) for unmatched clarity in city riding or clear weather, or selective yellow (2900-3100K, yellow lens) to cut through fog, rain, and snow by reducing glare and boosting contrast. Shark Demon® LED Fog Lights are fully SAE and ECE compliant for on-road use, and the IP67 waterproof rating ensures they're sealed tight against water and dust for all-weather reliability. The adjustable beam design provides flexible vertical or horizontal mounting, letting you direct light exactly where you need it most.

Installation is effortless with the included plug-and-play wiring harness—achieve a clean, tool-light setup in no time, right under your seat with integrated on/off switch with 5 ft wire length for operation. Plus, with a wide range of compatible mounting solutions available (sold separately), these lights securely fit virtually any Harley-Davidson®. Combining bold style, advanced engineering, and road-tested performance, Shark Demon® LED Fog Lights are the ultimate upgrade for riders who demand more. Patents pending.

Custom Dynamics, Shark Demon LED Fog Lights. Yellow

#721128

Stock:Yes

Upgrade your ride and own the night with Shark Demon® LED Fog Lights. These lights bring aggressive, industrial styling to your bike, perfectly complementing Shark Demon® headlights with signature fins and exposed screws for a bold, mechanical look. The gloss black aluminum housing delivers a sleek yet rugged aesthetic, combining lightweight strength and lasting durability with a high-end finish. Impact- and scratch-resistant polycarbonate lenses shield against road debris and tough riding conditions, keeping your lights crystal clear mile after mile.

Each pair delivers a powerful 4140 raw lumens (2080 effective lumens), flooding the road with brilliant light to dramatically enhance nighttime visibility and riding safety. Choose your ideal beam: crisp, daylight white (5800-6500K, clear lens) for unmatched clarity in city riding or clear weather, or selective yellow (2900-3100K, yellow lens) to cut through fog, rain, and snow by reducing glare and boosting contrast. Shark Demon® LED Fog Lights are fully SAE and ECE compliant for on-road use, and the IP67 waterproof rating ensures they're sealed tight against water and dust for all-weather reliability. The adjustable beam design provides flexible vertical or horizontal mounting, letting you direct light exactly where you need it most.

Installation is effortless with the included plug-and-play wiring harness—achieve a clean, tool-light setup in no time, right under your seat with integrated on/off switch with 5 ft wire length for operation. Plus, with a wide range of compatible mounting solutions available (sold separately), these lights securely fit virtually any Harley-Davidson®. Combining bold style, advanced engineering, and road-tested performance, Shark Demon® LED Fog Lights are the ultimate upgrade for riders who demand more. Patents pending.

Custom Dynamics, Shark Demon LED Fog Lights. Yellow

#721122

Stock:Yes

Upgrade your ride and own the night with Shark Demon® LED Fog Lights. These lights bring aggressive, industrial styling to your bike, perfectly complementing Shark Demon® headlights with signature fins and exposed screws for a bold, mechanical look. The gloss black aluminum housing delivers a sleek yet rugged aesthetic, combining lightweight strength and lasting durability with a high-end finish. Impact- and scratch-resistant polycarbonate lenses shield against road debris and tough riding conditions, keeping your lights crystal clear mile after mile.

Each pair delivers a powerful 4140 raw lumens (2080 effective lumens), flooding the road with brilliant light to dramatically enhance nighttime visibility and riding safety. Choose your ideal beam: crisp, daylight white (5800-6500K, clear lens) for unmatched clarity in city riding or clear weather, or selective yellow (2900-3100K, yellow lens) to cut through fog, rain, and snow by reducing glare and boosting contrast. Shark Demon® LED Fog Lights are fully SAE and ECE compliant for on-road use, and the IP67 waterproof rating ensures they're sealed tight against water and dust for all-weather reliability. The adjustable beam design provides flexible vertical or horizontal mounting, letting you direct light exactly where you need it most.

Installation is effortless with the included plug-and-play wiring harness—achieve a clean, tool-light setup in no time, right under your seat with integrated on/off switch with 5 ft wire length for operation. Plus, with a wide range of compatible mounting solutions available (sold separately), these lights securely fit virtually any Harley-Davidson®. Combining bold style, advanced engineering, and road-tested performance, Shark Demon® LED Fog Lights are the ultimate upgrade for riders who demand more. Patents pending.

Custom Dynamics, Shark Demon LED Fog Lights. Yellow

#721126

Stock:Yes