BIKE SELECTOR

20 of 1867 search results

Sort on:

- Tire spoon with axle nut hex wrench and tire spoon hex wrench for rim lock nut set - Both levers have perfectly contoured tire lever on one end - One lever has unique combination stepped 10/12 mm box end wrench on other end for turning rim lock nuts - Unique no-pinch tip on one lever helps protect inner tube during tire installation - Second wrench has hex box wrench for 30 mm axle nuts on other end - Made from lightweight forged 7075-T6 aluminum - Hard anodized finish - Under 10 inches in length and weigh only 3.5 oz. - Hex ends for axle nuts are rated for a maximum torque of 90 lb/ft
Motion Pro
New

T6 Combo Lever Set, 32 mm, 10/12 mm, 30/17/19 mm

#998039

Stock:Yes

- Perfectly contoured tire spoon on one end - Hex box wrench for 30 mm axle nuts on other end - Lightweight forged 7075 T-6 aluminum - Hard anodized finish - Under 10 inches in length and weigh only 3.5 oz. - Hex end is rated for a maximum torque of 90 lb/ft
Motion Pro
New

T6 Combo Lever Set, 30 mm, 10/12 mm, 30/22 mm adapter

#998037

Stock:Yes

- 2 tire spoon set with versatile adapter insert - Both levers have perfectly contoured tire lever on one end - One lever has unique combination stepped 10/12 mm box end wrench on other end for rim lock nuts - Unique no-pinch tip on one lever helps protect inner tube during tire installation - Second wrench has hex box wrench for 30 mm axle nuts on other end - Made from lightweight forged 7075 T-6 aluminum - Hard anodized finish - Under 10 inches in length and weigh only 3.5 oz. - Hex ends for axle nuts are rated for a maximum torque of 90 lb/ft - Unique adapter allows use on 17 and 19 mm axle nuts
Motion Pro
New

T6 Combo Lever Set, 30 mm & 10/12 mm

#998038

Stock:Yes

- 2 tire spoon set with versatile adapter insert - Both levers have perfectly contoured tire lever on one end - One lever has unique combination stepped 10/12 mm box end wrench on other end for rim lock nuts - Unique no-pinch tip on one lever helps protect inner tube during tire installation - Second wrench has hex box wrench for 30 mm axle nuts on other end - Made from lightweight forged 7075 T-6 aluminum - Hard anodized finish - Under 10 inches in length and weigh only 3.5 oz. - Hex ends for axle nuts are rated for a maximum torque of 90 lb/ft - Unique adapter allows use on 22 mm axle nuts
Motion Pro
New

T6 Combo Lever 30 mm

#998040

Stock:Yes

Tripmachine
New

Trip Machine Tool Roll black/vintage tan

#701337

Stock:Yes

Installsl and removes valve cores and valve core caps. With reversible driver to fit small and large valve cores. Aluminum body, with pocket clip, will even allow access to the double wheels of your pick-up or truck Note: See 530703 for replacement valve core insert only
Lisle

Lisle, valve core tool

#530702

Stock:Yes

Metric. 6-point head. Also replacement T-handle for 547017 7-piece set. With durable nickel-pewter finish.
Motion Pro

Motion Pro, T-handle 12mm

#547020

Stock:Yes

Metric. 6-point head. Also replacement T-handle for 547017 7-piece set. With durable nickel-pewter finish.
Motion Pro

Motion Pro, T-handle 13mm

#547021

Stock:Yes

Metric. 6-point head. Also replacement T-handle for 547017 7-piece set. With durable nickel-pewter finish.
Motion Pro

Motion Pro, T-handle 14mm

#547022

Stock:Yes

Metric. 6-point head. Also replacement T-handle for 547017 7-piece set. With durable nickel-pewter finish.
Motion Pro

Motion Pro, T-handle 19mm

#547024

Stock:Yes

Replacement remover for 530708 Lisle remover set.
Lisle

Lisle, replacement remover only. 1/4" & 6mm

#530709

Stock:Yes

200x32x32mm. Compatible with iDuctor W1200 Basic Kit 700294.
ID Tools

iD Tools, heating coil M16

#700298

Stock:No

Compatible with iDuctor Basic Kit 700294. Includes: - 700306 Replacement power cord EU F-type. 3 meter, 150 gram - 700307 Replacement power cord GB G-type. 3 meter, 150 gram - 700304 Flex Coil 110cm - 160-600 U coil. Used to make a heat coil for custom applications. Total length 60cm with a radius of 16cm - 700301 M10. 150x23x23mm - 700302 M8. 150x18x18mm
ID Tools

iD Tools, heating coil 6-piece kit

#700303

Stock:Yes

Included in iDuctor W1200 Basic Kit 700294. - With UK connector - 3 meter long - 150 gram
ID Tools

ID Tools, replacement power cord GB

#700307

Stock:Yes

120x52x52mm. Compatible with iDuctor W1200 Basic Kit 700294.
ID Tools

iD Tools, heating coil M30

#700295

Stock:No

200x40x40mm. Compatible with iDuctor W1200 Basic Kit 700294.
ID Tools

iD Tools, heating coil M20

#700297

Stock:No

The iDuctor W1200 is a handheld induction heating tool with a capacity of 1200W. Used to heat ferrous metals and dismantle bolts/nuts that are stuck, rusted or otherwise hard to loosen. Using heat to dismantle stubborn bolts and nut has been used for years and this tool works exactly like an open flame but faster, better and with much greater precision. The heat of an open flame can be a fire-hazard and may additionally damage materials that are much further away (think plastics, wiring harness, brake lines, fuel lines, rubber and so on), especially in relatively confined spaces. Induction heating just heats what needs to be heated, nothing else, this keeps the heat concentrated exactly where needed. Also perfect for heating bearings and/or races that have a shrink-fit mount. This kit includes a sturdy carrying case with the iDuctor. Included are the 110cm Flex Coil, a flexible heating coil with a aramid fiber protective sleeve. A 3 meter power cord. The 'U coil', a heating coil that can be bend into any desired shape. Heat coil M8 and heat coil M10, both with a 3.5 wire wrap. Note: Never heat material to a 'red hot glow'. It is unnecessary and can lead to damage of the component and heat coil. These images are shown for illustrative purposes only. - EU made - Made of high-quality materials, according to the latest CE + UKCA guidelines - Adjustable duration and intensity of heating - Microprocessor controlled heating with automatic overheat protection shut-off - Used in automotive, nautical, petrochemical, infrastructure and aerospace industries - No open flames - Rapid heating - Easy clamp fitting to exchange different heat coils - High precision heat delivery - One-hand operated - Voltage 230 VAC +/- 10% - Frequency 50-60 Hz - Output 1200 Watt - Safety Class 1 - Working Environment: Humidity 0-90%, non-condensing IP 20 - Weight 3.8kg - Dimensions package: 49cm long x 39cm wide x 13cm high. For optional heating coils see: 700295 M30. 120x52x52mm 700296 M24. 240x47x47mm 700297 M20. 200x40x40mm 700298 M16. 200x32x32mm 700299 M12. 200x26x26mm 700300 M10. 250x23x23mm 700301 M10. 150x23x23mm (included in kit) 700302 M8. 150x18x18mm (included in kit) 700303 Heating coil 6-piece kit. Incl. M30, M24, M16 M12, M10-250 700305 Heat pad. A white silicone pad for the removal of stickers
ID Tools

iD Tools, iDuctor basic kit

#700294

Stock:Yes

240x47x47mm. Compatible with iDuctor W1200 Basic Kit 700294.
ID Tools

iD Tools, heating coil M24

#700296

Stock:No

250x23x23mm. Compatible with iDuctor W1200 Basic Kit 700294.
ID Tools

iD Tools, heating coil M10

#700300

Stock:Yes

150x23x23mm. Included in iDuctor W1200 Basic Kit 700294.
ID Tools

iD Tools, heating coil M10

#700301

Stock:No