Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 263 search results

Sort on:

Sort on:

Replacement extractor bolt for 500508 Chain Breaker & River kit

Motion Pro, repl. extractor bolt

#547079

Stock:Yes

Replacement remover for 530708 Lisle remover set.

Lisle, replacement remover only. 3/8" & 10mm

#530711

Stock:Yes

Replacement remover for 530708 Lisle remover set.

Lisle, replacement remover only. 7/16" & 11mm

#530712

Stock:Yes

Replacement remover for 530708 Lisle remover set.

Lisle, replacement remover only. 9/16" & 14mm

#530714

Stock:Yes

Replacement remover for 530708 Lisle remover set.

Lisle, replacement remover only. 1/2" & 13mm

#530713

Stock:Yes

For 530824 brake drum spring tool

Lisle, replacement tip for 530824

#530748

Stock:Yes

For 530826 brake drum spring tool

Lisle, replacement tip for 530826

#530749

Stock:Yes

Used to remove & install brake shoe springs in brake drums. Heavy Duty. Works on brake drums with or without an anchor pin.
Note: See 530748 for replacement tips.

Lisle, brake spring tool heavy duty

#530824

Stock:Yes

Used to remove & install brake shoe springs in brake drums. Removes hook from the post when tool is turned. 'Shoe horn' design on the other end to slip spring back over the post.

Lisle, brake spring tool

#530827

Stock:Yes

Used to fasten rear wheel on single sided BMW swingarms; 190mmx100mm with T50 torx/star tips on both ends

Cruztools, T50 rear wheel Star/Torx wrench

#559201

Stock:Yes

Motion Pro, 12mm replacement collet

#599119

Stock:Yes

Motion Pro, 10mm replacement collet

#599118

Stock:Yes

Incl. 24mm & 28mm outside diameter aluminum adapters. Billet 6061-T6 aluminum frame provides unmatched strength and stiffness and lower weight. Quick release system presses straight against the retainer to eliminate side loading the valve and keepers. Works on all motorcycle, ATV, UTV, and small engine cylinder heads. Fully adjustable top and bottom. Aluminum lower adjuster will not damage or scratch valves. Includes two universal fork style tips/adapters. Durable blue anodized finish with laser engraved markings. Simple, fast, and easy to use.

Note: See 580891 for 18mm & 28mm outside diameter adapters.

Motion Pro, T-6 valve spring compressor

#580890

Stock:Yes

Complete bolt removal kit. Used to remove snapped-off bolts or studs from M5 to M16. Comes with correct sized drills, drill guides and bolt extractors.
- Thread Size: M5 to M16
- Drill diameters: 3.2mm to 8.7mm
Note: Use with hand tools only.

Kukko, bolt extraction kit. M5 to M16

#951156

Stock:Yes

For M5, M6, M8 and M10 metric threads. Used to repair damaged or stripped threads in aluminum or steel that are as strong or stronger, than the original threads. Just drill out old threads. Then use the appropriate countersink for a nice beveled edge. Cut threads. Insert the externally threaded insert / threaded bushing. Screw it into place with the insert driver.
- Complete set to get the job done
- Build Series: K-58
- Diameter of Insert Sleeves: M5 - M10
- Pitch of Insert Sleeves: 08 - 1.0
- Length of Insert Sleeves: 7.6 - 15
- Number of Sleeves: 8x5
- Includes cutting oil
- Weight: 2.07kg.

Kukko, thread repair set. M5 to M10

#951157

Stock:Yes

Used to install the tapered roller (conical) motorcycle frame neck bearings with an inner diameter of 25mm to 35mm, to the lower triple tree. Does not damage bearing.
- Build Series: 71-M
- Inside Diameter of bearing 25mm to 35mm
- Number of Impact Sleeves: 1
- Diameter of Impact Sleeves: 32mm
- Length of Impact Sleeve: 360mm
- Number Of Rings: 4
- Weight 1.935kg
- Packed in sturdy carrying case
- The following are also included in the set: 1 clipping device for fluid hoses. Specifically intended for the replacement of the steering head bearings
- Instructions and conversion table in the cover
- Secure storage in special foam
- The special shape of the impact ring allows for the power to be transmitted to the internal ring during pressing or hammering of the tapered roller bearing. This way the bearing cage is not damaged and can be re-used when desired
- The combination of impact ring and impact sleeve required for the installation of the ball bearing can be found in the table inside the case cover
- The steering stem, bearing races and gaskets of the bearing will not be damaged
- The impact rings have a rubber ring and ensure locking at the strike pipes
- With the combination of the impact ring and the impact pipe, the installation forces are never directed through the rolling elements of the bearing
- Strong design, high performance and long service life
- A tube of KUKKO special grease included for the pressure spindle
- Complete set in a sturdy carrying box.
Note: To install the steering head / frame neck bearing races see Kukko 951178 which will drive 40mm to 54mm bearing races.

Kukko, steering head bearing mount kit

#951111

Stock:Yes

- Length: 530mm
- Weight: 886 grams
- Material: Chrome vanadium
- Finish: Satin

Sonic, tire iron 530mm

#954070

Stock:Yes

Universal puller for steering head bearings and other motorcycle bearings. Professional frame neck bearing puller that can be used on 98% of all motorcycles. Set includes a 2-arm 'Cobra' extended puller, to reach the lower steering head bearing. The special clamp holds the puller arms tight to prevent 'slip-off'.
- Includes a 170mm spindle
- Also includes a valve cap remover to check air pressure without getting your hands dirty
- Complete set in a sturdy carrying box.

Kukko, universal frame bearing puller set

#951177

Stock:Yes

Safely removes and installs the upper spherical bearing on rear shocks; Durable hardened tool steel construction; Corrosion resistant black oxide coating; Reversible puller cup with cutaway fits a wide variety of shock reservoir and compression adjuster configurations; brass thrust washer

Motion Pro Shock bearing puller

#580886

Stock:Yes

Replacement remover for 530708 Lisle remover set.

Lisle, replacement remover only. 5/16" & 8mm

#530710

Stock:Yes