Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 24 search results

Sort on:

Sort on:

Used to remove and install OEM 9076 or 9270A swingarm pivot bearing. This tool can also be used to remove and install the front fender spherical bearings on Softail Springers that use OEM 9141 fork leg to rocker bearings.

JIMS, Softail swingarm pivot bearing tool

#978479

Stock:Yes

Used to align engine, transmission and swingarm

JIMS, powertrain alignment tool

#978516

Stock:No

Used to remove and replace the swingarm bushing assembly (cleve blocks / OEM 47556-81). Prevents damage to the bushing assembly

JIMS, cleve block bushing assembly tool

#978378

Stock:Yes

13 inch long wrench. Used to remove/install OEM 3684, the 5/16-18 T40 bolt that holds the rear fender to the frame on various FLT/Touring models.
Tire removal is not required.

Lang Tools, rear fender bolt wrench

#514619

Stock:Yes

Used to install the swingarm in a 5-speed rubber mount frame. When the bushing assemblies (cleve blocks) are replaced they need to be positioned to install in the rear of the transmission. This tool will spread the swingarm bushing assembly allowing the installation of the swingarm.
Note: See 978378 JIMS cleve block bushing assembly tool for bushing removal and installation.

JIMS, cleve block spreading tool

#978377

Stock:Yes

Used to remove & install wheel bearing and swingarm bearing races
Note: Used with 920542 JIMS driver handle

Jims, wheel/swingarm bearing race tool

#978238

Stock:Yes

Used to press-in frame neck bearing races, straight and true, without damage.

JIMS, steering head race install tool

#962041

Stock:Yes

Used to align engine, transmission and swingarm with each other to the correct position.

George's Garage, FLT power train alignment tool

#979459

Stock:Yes

Used with many JIMS tools. Amongst others MCS 978289, 978290, 978337, 978338, 978238, 978356, 978376 and 978417.
Approx. length 12" (30.5cm)

JIMS, race & bearing driver handle

#920542

Stock:Yes

Used to remove or install side stand (jiffy) springs, exhaust pipe springs, tank holding springs, cotter pins, etc. USA made.

Motion Pro, spring hook, heavy duty

#547139

Stock:No

Used to remove or install side stand (jiffy) springs, exhaust pipe springs, tank holding springs, cotter pins, etc. Compact size for better access. USA made.

Motion Pro, mini spring hook

#547328

Stock:Yes

Used to install steering head cups and tapered races in the frame neck.

MCS, steering head cup & race install tool

#925521

Stock:No

Used to remove and install the rear isolator. Slides between the mount block and frame above the rear isolator. The ratchet tool expands the distance between the mount block and the frame so the isolator can be removed and a new one installed. USA made.

Lang Tools, Buell rear isolator tool

#514170

Stock:No

Used to install OEM 9208 spherical swingarm bearings. Bearings must be installed and aligned accurately for good handling. Both drive side and brake side bearings, which are at different depths, can be easily and accurately installed with this tool kit. includes a remover to press the spacer out of the bearing.

JIMS, swingarm bearing install tool

#559414

Stock:Yes

Used to remove stubborn neck bearing frame cups from the frame neck with controlled force. Fits all external 48311-60 style neck cups on 49-87 models with a 1" fork stem (where I.D. of neck cup is approx. 1.050" / 26.67mm).
Note: Tool 998351 requires 998377 driver handle with magnetic wedge spacer. USA made.

Fast Eddy, neck cup removal tool

#998351

Stock:Yes

Used to press bearing neck cup into the frame neck and bearing races into the cups. Neck cups can be as much as a .004"-.006" interference fit. That's why it takes a big hammer when you install them that way. This tool gently presses them in like butter without damage or uncontrollable forces.
- Makes easy work of installing neck cups & races into motorcycle frames
- Incorporates unique thrust bearing system
- Critical components made from steel alloy that has roughly double the tensile strength of mild carbon steel
- Quick-adjustable length to work with a wide variety of H-D, aftermarket, and custom made frames
- Comes with 2 anvils that work with all H-D neck cups that are the tapered roller bearing type
- If you have an oddball motorcycle and the anvils don't fit your cups, the adjustable length allows you to make extra spacers that better fit your cups
- Cerakote finish
- USA made.
Note: Fast Eddy advises you to only press cups in your frame that already have pre-installed races. Or press new races into the cups at the same time you're pressing the cups into the frame. Do not press cups into the frame without bearing races.

Fast Eddy, steering head cup install tool

#998360

Stock:Yes

Used to install & remove the Timken style neck races in the frame neck or in the frame cup. Works with all models with a 1" steering stem. The Fast Eddy wedge spacer features small but strong magnets that keep the drivers in place while you slide in the driver handle. Manufactured heat treated tool steel to reduce wear.
- Magnetic hold between drivers and wedge spacer
- Super-easy to work with
- No longer you have to try and hold them in with one hand while you slide in the driver handle
- Made from heat treated US steel for reduced wear without becoming brittle
- Also removes the Timken bearing races in swingarms of 58-86 4-speed Big Twin models.
Note: Requires use of 998377 driver handle with magnetic wedge spacer, which must be ordered separately.

Fast Eddy, Timken steering head race tool

#998380

Stock:Yes

Used to remove and install the swingarm bushing assembly (also known as cleve blocks) (MCS 996483 / OEM 47556-81) found in the swingarms of 'rubber mounted' Touring and FXR models. Damage to the bushing assembly during installation is prevented by gently applying pressure and distributing it evenly to the outer sleeve. Tool can be used with or without a press.

MCS, rubber mount swingarm assembly tool

#925546

Stock:Yes

Used to install steering head cups and steering head bearing races in the frame neck; 2-piece design

George's Garage, Steering head race/cup install tool

#979458

Stock:Yes

Used with 979457 steering head bearing race tool; Is used between tool so tool will keep a firm grip on the bearing race that is removed

George's Garage, driver spacer

#979462

Stock:Yes