BIKE SELECTOR

20 of 348 search results

Sort on:

With 5/8-18 threaded speedo cable connector. For your reference only: For identification purposes only we have named the earlier 'FL style' speedo­meter faces with 'model years'. These may not accurately represent actual model years and are for use as reference only. Most FL type speedometers are available with K.M.H. or M.P.H faces. All speedometers from the '36-40' face to the '00-03' face styles feature same dimensions and fit the FL, FLH, Fat Bob, FLST, FXST etc. tank mounted style dash. Note that a small modification to the dash, to fit the re-set knob correctly, may be required. 2:1 ratio is suitable for most front wheel drive, 1:1 drive ratio is suitable for most transmission drive models. 84-95 Softail models may have a different 2.24:1 ratio, of which there are listed a few speedometers. Note: 1991-up turn signals will no longer self cancel. - 60 M.P.H. = 1000 R.P.M. (= 1:1) - 60 M.P.H. = 2000 R.P.M. (= 2:1) - 60 M.P.H. = 2240 R.P.M. (= 2.24:1) - 60 K.M.H. = 700 R.P.M. (= 1:1) - 60 K.M.H. = 1400 R.P.M. (= 2:1)
MCS

FL speedometer, '68-72 face', black/silver. 2:1 mph

#900855

Stock:Yes

Enables H-D models, equipped with the J1850-bus system, to control instruments and indicator lights. ABE approved. This connector makes the connection between the Motoscope Tiny and the H-D J1850-bus system. A plug & play system since it takes OEM speedo connector. Used in combination with all Motogadget instruments (excl. Motoscope Pro). Note: Model years as mentioned are indications only since H-D mixed and matches systems. Note: Later models come with CAN-bus wiring. These will not fit.
Motogadget

Motogadget, mo.can J1850 Twin Cam connector

#930320

Stock:Yes

Wire length 128cm.
Daytona

Daytona, speed pulse converter DIA18 insert

#597876

Stock:Yes

Bolt with a built-in magnet. Used to generate the pulse for a reed style speedo sensor. This magnet bolt can be used to replace a mount bolt of a brake rotor / brake disc, drive pulley or chain sprocket.
Koso

KOSO, speedo sensor magnet bolt. M6 x 1.0 x 16.5mm

#942264

Stock:Yes

Bolt with a built-in magnet. Used to generate the pulse for a reed style speedo sensor. This magnet bolt can be used to replace a mount bolt of a brake rotor / brake disc, drive pulley or chain sprocket.
Koso

KOSO, speedo sensor magnet bolt. M6 x 1.0 x 14mm

#942265

Stock:Yes

Used to relocate the speedometer from stock 'above the risers' position, forward to above the headlamp. The cover makes for a fluid transition between headlamp and the speedometer. The mount is made of black electrostatic painted steel and the cover of black unpainted ABS plastic. Offers a bolt-on installation and comes complete with installation hardware and instructions.
C-Racer

C-Racer, Speedometer holder w/headlight cover. Black

#950964

Stock:Yes

OEM style metal housing. Stock length. Used with OEM speedometers. These speedos have internal (female) threads. OEM replacement reference 11132-61, 67028-62
Samwel

Speedo cable, rear wheel drive. Metal housing

#971537

Stock:No

With 5/8-18 threaded speedo cable connector. For your reference only: For identification purposes only we have named the earlier 'FL style' speedo­meter faces with 'model years'. These may not accurately represent actual model years and are for use as reference only. Most FL type speedometers are available with K.M.H. or M.P.H faces. All speedometers from the '36-40' face to the '00-03' face styles feature same dimensions and fit the FL, FLH, Fat Bob, FLST, FXST etc. tank mounted style dash. Note that a small modification to the dash, to fit the re-set knob correctly, may be required. 2:1 ratio is suitable for most front wheel drive, 1:1 drive ratio is suitable for most transmission drive models. 84-95 Softail models may have a different 2.24:1 ratio, of which there are listed a few speedometers. Note: 1991-up turn signals will no longer self cancel. - 60 M.P.H. = 1000 R.P.M. (= 1:1) - 60 M.P.H. = 2000 R.P.M. (= 2:1) - 60 M.P.H. = 2240 R.P.M. (= 2.24:1) - 60 K.M.H. = 700 R.P.M. (= 1:1) - 60 K.M.H. = 1400 R.P.M. (= 2:1)
MCS

FL speedometer, '68-72 face', black/silver. 1:1 mph

#940408

Stock:Yes

Fiber washer. Multiple applications. Used for speedometer and tachometer drive gear. OEM replacement reference 67142-52. Note: OEM valve adjusting plug washer for XR1000 models (4 used) is made of aluminum.
Athena

Athena, gasket speedo drive unit

#979894

Stock:Yes

Fits 961336 'flat plate' speedo drive block-off plug.
Jims

JIMS, gasket for 961336 speedo drive block-off plug

#961337

Stock:Yes

Used with 930269 Motoscope pro only
Motogadget

Motogadget, breakout box J1850 XL Molex

#930312

Stock:Yes

Attaches to tank-mounted speedometers. This half-mooned visor, made of cast metal, blocks the sun's glare from the speedometer glass to make it easier to read the speedometer. The visor has a quality chrome finish. It secures with a self adhesive tape.
National Cycle

NC cast speedometer visor chrome

#8082103

Stock:Yes

Motogadget

Motogadget, Speedo Sensor BMW Boxer Aircooled

#963333

Stock:Yes

Used with 930269 Motoscope pro only
Motogadget

Motogadget, breakout box J1850 VRSC

#930313

Stock:Yes

Used with 930269 Motoscope pro only
Motogadget

Motogadget, breakout box J1850 Twin Cam

#930310

Stock:Yes

Enables H-D models, equipped with the J1850-bus system, to control instruments and indicator lights. ABE approved. This connector makes the connection between the Motoscope Tiny and the H-D J1850-bus system. A plug & play system since it takes OEM speedo connector. Used in combination with all Motogadget instruments (excl. Motoscope Pro). Note: Model years as mentioned are indications only since H-D mixed and matches systems. Note: Late models come with CAN-bus wiring. These will not fit.
Motogadget

Motogadget, mo.can J1850 XL Molex connector

#930322

Stock:Yes

Used with 930269 Motoscope pro only
Motogadget

Motogadget, breakout box j1850 XL Deutsch

#930311

Stock:Yes

OEM style metal housing. Stock length. Used with 62-95 OEM & reproduction speedometers. These speedos have external male 5/8-18 threads. OEM replacement reference 11132-37, 11132-37R
Samwel

Speedo cable, rear wheel drive. Metal housing

#971535

Stock:Yes

Front wheel drive. 16-1mm threaded. Used with stock handlebar / dash mounted metal speedometers Note: aftermarket speedos mostly have different (12-1mm threads) Stock length varies. See following length reference chart: - 40" length (stock): Repl. 67051-73 and 67078-85A. Fits 73-E78 FX; 86-94 FXR, FXLR; 1985 FXSB; 1973 XL models. Repl. 67052-78B. Fits L78-82 FX (excl. FXWG); 82-84 FXSB; 84-87 FXRS; 83-85 XLX; 84-up XL models. - 43" length (stock): Repl. 67048-83A. Fits 84-85 XLS; 1985 FXRT, FXRS, FXRSP; 87-94 FXRS Convertible. - 47" length (stock): Repl. 67054-83B. Fits 84-94 FXRT, FXRS, FXRSP (excl. 1985 models).
Barnett

Barnett, speedo cable. 47". Braided

#570026

Stock:Yes

Stock replacement Reed sensor, as included with KOSO's speedometers. Complete with 135cm wiring and black 3-pin connector as found on KOSO instuments.
Koso

KOSO, replacement speedo sensor

#942262

Stock:Yes