Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 1134 search results

Sort on:

Sort on:

Chrome plated billet aluminum in the 10-gauge design. Direct replacement for the stock cover on the left side of the engine. Incl. chrome hardware.

Arlen Ness, 10-gauge stator cover. Chrome

#569831

Stock:Yes

Cycle Electric Inc. Alternator kits combine our state of the art stators with our legendary bullet proof rectifying regulators. This complete charging kit includes:
-Stator x1
-Rotor x1
-Regulator x1
-Hardware misc.

Cycle Electric Alternator kit

#998307

Stock:No

Ball bearing for generator armature. OEM replacement reference 29917-82

Ball bearing, generator drive end

#509380

Stock:Yes

4-pin female. OEM replacement reference 74510-70, 74510-70A.

Accel, voltage regulator/rectifier. Black

#500632

Stock:Yes

1-phase stator.

Compu-fire, alternator stator

#538440

Stock:Yes

Early relay style. Without cover. Wiring change is not required.
Note: See 506002 (chrome) or 506003 (black) for optional cover.

6-Volt electronic voltage regulator

#506004

Stock:No

Chrome plated die cast aluminum. Installs on the outside of the crankcase. Helps prevent the regulator/rectifier plug disconnecting from the alternator stator plug. Includes socket head bolt.

Plug retainer, regulator/rectifier. Die cast

#517793

Stock:Yes

Un-molded stators will benefit from better cooling, they will help prevent overheating issues and generally offer a longer service life.
50 AMP, 3-Phase

Accel, Alternator stator unmolded

#516247

Stock:Yes

12-Volt electronic version. Without cover. Wiring change is not required. OEM replacement reference 4785-38/12.
Note: See 506002 (chrome) or 506003 (black) for optional cover.

12-Volt electronic voltage regulator

#506001

Stock:No

2-pin male. Solid state. OEM replacement reference 74516-86.

Accel, voltage regulator/rectifier. Black

#500634

Stock:Yes

Used to install the stator to the crankcase. OEM replacement reference 29988-73

Locking plate, alternator stator

#555529

Stock:Yes

Steel body cover. Slides over generator on 6 and 12-volt generators. OEM replacement reference 94890-83T and 31080-83T.

Generator cover. Chrome

#512540

Stock:Yes

With 35-37 style text. Fits 512911 relay. OEM replacement reference 4786-26.

Delco-Remy regulator relay cover 2-post. Black

#507801

Stock:No

Chrome plated steel. OEM style replacement. Fits behind the jiffy stand on stock and many custom bikes.
OEM replacement reference 74533-70A.

Voltage regulator/rectifier bracket. Chrome

#508790

Stock:Yes

Chrome. Installation hardware for 516398 generator strap. OEM replacement reference 30029-30, 1529-30.

Nut & washer, generator strap

#516399

Stock:Yes

Chrome plated steell. With an open design to allow plenty of cooling. Includes mounting hardware.
OEM replacement reference 74579-97.

Voltage regulator/rectifier cover. Chrome

#519462

Stock:Yes

With vented rotor

Compu-fire. 3-phase charging kits

#538444

Stock:No

Dimensions: 28mm x 42mm x 12mm.
3-LED real time info on charging status.
Have you ever wondered if your charging system is still working during your trip? Tackle the problem before it becomes a nasty surprise.
- Too high (red), the battery is overcharged due to a faulty regulator
- Too low (red), the voltage will get low due to a faulty charging system or a failing battery
- Good (green).
Dimensions: 28mm x 42mm x 12mm.

Dynatek, charge monitor

#902541

Stock:Yes

Metal with plastic dust cover; Max. 12V/15A; With 150cm wiring wiring; Incl. relay for on/off switching together with ignition switch

Power point socket kit

#926611

Stock:Yes

38 Amp. kit. High quality components to replace stock parts. Rotor, stator & regulator/rectifier kit comes as a complete kit with Accel's Heavy Duty rotor, alternator stator and chrome plated regulator. Extra wide splines. Compatible with stock components. Nothing else needed to solve your charging issues.

ACCEL, Rotor/Stator/Regulator charge kit

#516241

Stock:Yes