Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 1137 search results

Sort on:

Sort on:

To enhance the visibility and add a touch of modern flair to these iconic Chief Bobber and Super Chief motorcycles, Killer Custom offers front LED turn signals as a "must have" accessory. These turn signals feature bright, high-intensity LED lights that provide excellent visibility in all lighting conditions, making them an essential safety feature.

Lights holds ECE approval and possesses comprehensive legal documentation, affirming its suitability for road use, assuring safety, and compliance with regulatory standards. Drive confidently with peace of mind.

Killer Custom, Front Led Turn Signals. Black

#708958

Stock:Yes

Experience superior safety and style with our taillight/turn signals, equipped with high-intensity LED lights for enhanced visibility in any lighting condition. The streamlined design perfectly complements your bike's aesthetics, guaranteeing a head-turning look.

Lights holds ECE approval and possesses comprehensive legal documentation, affirming its suitability for road use, assuring safety, and compliance with regulatory standards. Drive confidently with peace of mind.

Killer Custom, Mohawk Rear LED Taillight / Turn Signal Combo

#708959

Stock:No

Unique style and perfection separate our new line of parts for the Indian Scout model from other manufacturers. Those black anodized turn signals are our different vision of how turn signals should look and perform on modern bikes.

Lights holds ECE approval and possesses comprehensive legal documentation, affirming its suitability for road use, assuring safety, and compliance with regulatory standards. Drive confidently with peace of mind.

Killer Custom, Mohawk Led Front Turn Signals. Black

#708941

Stock:No

Silver anodized.
Mounts to 47-49mm diameter forks.
The perfect way to install small EC approved front turn signals that go virtually unnoticed, until activated! Homogeneously bright LED units assure excellent visibility in traffic. The HeinzBikes 'Stairs' is a 2-piece locking system, allowing installation without disassembling the fork. Housing are CNC machined aluminum with an anodized finish for lasting good looks.
- CNC machined aluminum housings
- Anodized finish
- Homogeneously bright LED
- Excellent visibility in traffic
- 2-piece construction
- No fork disassembling required
- 10-minute install

HeinzBikes, ZC-Line Classic LED fork turn signal set. Silver

#707983

Stock:Yes

Used to install motorcycle lights as turn signals, tail/brake lights and position lights. Offers an electronic universal installation solution. Compatible with all motorcycles, from classics to bikes equipped with the latest operating systems.
- Electronic universal solution for motorcycle lights such as indicators, tail/brake light and position light
- Compatible with classic bikes, new models and modern operating systems
- Correct flashing frequency
- No error messages in the cockpit
- No disruptive quiescent currents
- Installation of indicators with higher power consumption [watts] than original
- Installation of indicators with lower power consumption [watts] than original
- Installation of indicators with higher voltage [Volt] than original
- Installation on motorcycles with minus-switched indicators
- Installation on motorcycles with current-controlled indicators

Kellerman, i.Nex Equalizer.8V

#997706

Stock:Yes

White running light that switches to amber turn signal. Smoke lens.
High performance LED front turn signal assembly to replace the OEM turn signal with an aggressive styled housing in a gloss black finish. Units are equipped with plug & play JAE connector for quick and simple 100% plug and play installation. Bolts directly to your Road Glide’s inner fairing using the provided hardware.
- Faceted lens offers dual intensity running light
- Front facing turn signal assembly to replace the OEM turn signals
- High performance LED
- Aggressive fin-styled housing
- Decorative metal rivets complete the look with a rugged, industrial appeal
- Gloss black finish
- Plug and play JAE connector for quick and simple 100% plug and play installation
- Housing dimensions: 2.08” (50mm) long x 2.08” (50mm) high x 1.78” (45mm) deep
Note: No ECE approval.

Custom Dynamics, Shark Demon Selective front turn signals

#717773

Stock:Yes

Dual intensity yellow running light with full contrast DOT compliant yellow turn signal. Yellow faceted lens.
High performance LED front turn signal assembly to replace the OEM turn signal with an aggressive styled housing in a gloss black finish. Units are equipped with plug & play JAE connector for quick and simple 100% plug and play installation. Bolts directly to your Road Glide’s inner fairing using the provided hardware.
- Faceted lens offers dual intensity running light
- Front facing turn signal assembly to replace the OEM turn signals
- High performance LED
- Aggressive fin-styled housing
- Decorative metal rivets complete the look with a rugged, industrial appeal
- Gloss black finish
- Plug and play JAE connector for quick and simple 100% plug and play installation
- Housing dimensions: 2.08” (50mm) long x 2.08” (50mm) high x 1.78” (45mm) deep
Note: No ECE approval.

Custom Dynamics, Shark Demon Selective front turn signals

#717772

Stock:Yes

This heavy-duty silicone rubber seal is designed to replace the factory-installed seal on Harley-Davidson TSM (Turn Signal Module) and TSSM (Turn Signal Security Module) wire harness plug. When replacing the TSM, Custom Dynamics strongly recommends replacing the original seal to maintain a secure, watertight connection and protect the unit from moisture-related damage.
Used on both OEM and Custom Dynamics 709103, 709104, 709105 and 709106 TSM (turn signal modules)

Custom Dynamics, Replacement Seal for TSM/TSSM Connector

#709107

Stock:Yes

With Position Light.
ECE approved. Black anodized CNC machined billet aluminum housing. Super slim and extremely bright LED front turn signals with a white position light for additional safety. Installs below the handlebar for an inconspicuous front turn signal set-up.
- Black anodized
- CNC machined aluminum housing
- ECE approved lens
- Super slim design
- Ultra bright LED illumination.

HeinzBikes, 'Stripes' below bar turn signals. Black PL

#718594

Stock:Yes

Without Position Light.
Black anodized finish. ECE approved front turn signals with a white position light. CNC machined billet aluminum housing. These are the smallest, brightest and most powerful LED turn signals HeinzBikes has made to date. Virtually invisible on the handlebar, with a 'smaller than a 1 cent coin' lens. Installs below the handlebar for an inconspicuous front turn signal set-up.

HeinzBikes, Nano below bar turn signals. Black no PL

#718595

Stock:Yes

1.5W, 1 LED. An inconspicuous install below the handlebar and approved for front use. Hard to spot once installed but street legal. In busy traffic it is important that turn signals are actually seen, this is where the Kellermann power LEDs shine... they are spectacularly bright so you will not be overlooked. Apart from the power LEDs a sophisticated system of lenses and reflectors, called EXtranz® (Extreme Optical Transparency technology), is used. Installation is bolt-on and all electronics of the Dash turn signals are inside the turn signal housing, for easy connecting to the 12 volt system.
- Sensationally small, spectacularly bright
- EXtranz® - Extreme Optical Transparency Technology
- Kellermann HighPower LED Technology
- Longlife Protection Guard®, IC operated, 330 kHz
- Black quality metal housing with tinted lens
- Suitable for 12 volt DC applications
- European design protection
- Approved for front use.
Note: Electronic equipment may be required to regulate flash rate (see 996466 Kellermann i.Nex equalizer for an easy turn signal, tail/brake lights and position lights installation solution)

Kellermann, 'Dash A' turn signal. Left front

#996770

Stock:Yes

1.5W, 1 LED. An inconspicuous install below the handlebar and approved for front use. Hard to spot once installed but street legal. In busy traffic it is important that turn signals are actually seen, this is where the Kellermann power LEDs shine... they are spectacularly bright so you will not be overlooked. Apart from the power LEDs a sophisticated system of lenses and reflectors, called EXtranz® (Extreme Optical Transparency technology), is used. Installation is bolt-on and all electronics of the Dash turn signals are inside the turn signal housing, for easy connecting to the 12 volt system.
- Sensationally small, spectacularly bright
- EXtranz® - Extreme Optical Transparency Technology
- Kellermann HighPower LED Technology
- Longlife Protection Guard®, IC operated, 330 kHz
- Black quality metal housing with tinted lens
- Suitable for 12 volt DC applications
- European design protection
- Approved for front use.
Note: Electronic equipment may be required to regulate flash rate (see 996466 Kellermann i.Nex equalizer for an easy turn signal, tail/brake lights and position lights installation solution)

Kellermann, 'Dash A' turn signal. Right front

#996771

Stock:Yes

Designed for used in combination with 720025 and 720026 V2 Shark Demon headlamp kits, which require the removal of the OEM turn signals. These modules offer a plug & play installation and ensure that the front turn signal circuits maintain the correct electrical load, preventing rapid flashing turn signals, unwanted Diagnostic Trouble Codes (DTC) or Body Control Module (BCM) warning messages on your dash.
- Plug & Play for 720025 and 720026 dual headlamp kits
- Prevents trouble codes
- Reliable
- Discreet integration

Custom Dynamics, front turn signal equalizer modules

#719370

Stock:No

Wiring harness extension & quick-disconnect for the OEM Tour-Pak. Used to quick disconnect harness plugs in-line with the main motorcycle wire harness under the seat to provide a 32 inch (81cm) extended wire lead with open 6-pin female Molex connector. This extended lead will mate to the Gen1 male OEM 14-24 style Tour-Pak wire harness (OEM 69200131) to provide power to the stock Tour-Pak lighting. The accessible connector provides easy removal of the Tour-Pak.

Custom Dynamics, Quick Disconnect ext. harness for Tour Pak

#719371

Stock:No

Black. Without license plate bracket.
Replaces the stock turn signal bar and allows the license plate to be mounted below the taillight, to emphasize the low-down look of your bagger. The extra narrow turn signal bar has built-in license plate illumination, a special trim will cover the mounting holes of the stock license plate mounting holes for the finishing touch. Incl. turn signal bar, amber turn signals but does not include the license plate holder.
OEM replacement reference 53702-04A.
Note: 99-E03 models will require the separate purchase of MCS 514106 taillight socket.
Note: See 501122 for Bullet turn signal bar with license plate bracket.

Bullet turn signal bar, without license plate relocation kit

#708976

Stock:Yes

With Position Light.
Black anodized finish. ECE approved front turn signals with a white position light. CNC machined billet aluminum housing. These are the smallest, brightest and most powerful LED turn signals HeinzBikes has made to date. Virtually invisible on the handlebar, with a 'smaller than a 1 cent coin' lens. Installs below the handlebar for an inconspicuous front turn signal set-up.

HeinzBikes, Nano below bar turn signals. Black with PL

#718596

Stock:Yes

This will replace OEM TSM (Turn Signal Module) 68921-07, HFSM (Hands Free Security Module) 68925-07 (for US & HDI/EU models) and HFSM 69976-08.
Integration with the OEM safety switches prevent starting in gear without the clutch pulled. It will not replace the HFSM factory alarm features. Installation instructions are included.
- Direct Plug-and-play replacement for the OEM Harley-Davidson turn signal modules
- Functionality: Operates solely as a TSM (Turn Signal Module) without and will not support functions/security features of the TSSM (Turn Signal Security Module)
- Lighting Compatibility: Works with both LED and incandescent bulbs
- Turn Signal Load Range: Supports 0.24A to 6A per side
- No Load Equalizer Required: Compatible with BCM-compliant LED upgrades
- Programming Compatibility: Follows OEM TSM manual password learning and supports TechnoResearch module replacement procedure
- Turn Signal Functions: Manual and self-canceling based on speed, time, and direction
- Four-Way Hazard Operation: Smart cancellation based on timing, ignition position, and battery voltage
- Safety Feature: Auto shut-off when tilt exceeds 45° for more than 1 second
- Protection: Built-in short circuit and overcurrent protection on turn signal circuits
- Power Efficiency: Designed for low current consumption
- Voltage Range: Operates between 11VDC and 15VDC
- Build Quality: Robust, high-quality components
- Includes installation instructions.
Note: If you want to replace the seal for the stock H-D turn signal module connector, it is available as 709107.

Custom Dynamics, Smart turn signal module TSM3

#709105

Stock:Yes

This will replace OEM TSM (Turn Signal Module) 68920-01, TSSM (Turn Signal Security Module) 68922-00 (for US models) or TSSM 68924-00 (for HDI/EU models). It will not replace the TSSM factory alarm features.
Note: The replacement of the OEM TSSM factory alarm module 68922-00 & TSSM 68924-00 for models with EFI require the use of a TechnoResearch diagnostic tool to complete the TSSM module replacement procedure. For some models a manual procedure to marry the module to the bike is possible, for all others the TechnoResearch diagnostic tool is required for TSSM module replacement. Installation instructions are included.
- Direct Plug-and-play replacement for the OEM Harley-Davidson turn signal modules
- Functionality: Operates solely as a TSM (Turn Signal Module) without and will not support functions/security features of the TSSM (Turn Signal Security Module)
- Lighting Compatibility: Works with both LED and incandescent bulbs
- Turn Signal Load Range: Supports 0.24A to 6A per side
- No Load Equalizer Required: Compatible with BCM-compliant LED upgrades
- Programming Compatibility: Follows OEM TSM manual password learning and supports TechnoResearch module replacement procedure
- Turn Signal Functions: Manual and self-canceling based on speed, time, and direction
- Four-Way Hazard Operation: Smart cancellation based on timing, ignition position, and battery voltage
- Safety Feature: Auto shut-off when tilt exceeds 45° for more than 1 second
- Protection: Built-in short circuit and overcurrent protection on turn signal circuits
- Power Efficiency: Designed for low current consumption
- Voltage Range: Operates between 11VDC and 15VDC
- Build Quality: Robust, high-quality components
- Includes installation instructions.
Note: If you want to replace the seal for the stock H-D turn signal module connector, it is available as 709107.

Custom Dynamics, turn signal module TSM-1

#709103

Stock:Yes

With a single intensity Selective Yellow LED turn signal only setup behind an authentic SAE selective yellow lens.
DOT-compliant.
Premium integrated LED illuminated front turn signal vents, designed to replace the non-illuminated vented speed plates in the Custom Dynamics Shark Demon® 2 Road Glide head lamp kit (MCS 720025 or MCS 720026) , which are sold separately. These turn signal vents will not fit stock or any other aftermarket headlamp kit.
Features a gloss black assembly with bold, race-inspired fin styling, decorative mesh with a modern look and enhanced safety. Factory air flow is retained.
- Decorative mesh
- Bolt on installation
- Plug & Play.
Note: Compatible with Shark Demon® kits MCS 720025 or MCS 720026 only and is not compatible with any other stock or aftermarket LED headlamp kit.

Custom Dynamics, turn signal LED vent inserts. Front. Black

#719368

Stock:No

This will replace OEM TSM (Turn Signal Module) 68920-07 and HFSM (Hands Free Security Module) 68924-07 (for US & HDI/EU models).
Integration with the OEM safety switches prevent starting in gear without the clutch pulled. It will not replace the HFSM factory alarm features. Installation instructions are included.
- Direct Plug-and-play replacement for the OEM Harley-Davidson turn signal modules
- Functionality: Operates solely as a TSM (Turn Signal Module) without and will not support functions/security features of the TSSM (Turn Signal Security Module)
- Lighting Compatibility: Works with both LED and incandescent bulbs
- Turn Signal Load Range: Supports 0.24A to 6A per side
- No Load Equalizer Required: Compatible with BCM-compliant LED upgrades
- Programming Compatibility: Follows OEM TSM manual password learning and supports TechnoResearch module replacement procedure
- Turn Signal Functions: Manual and self-canceling based on speed, time, and direction
- Four-Way Hazard Operation: Smart cancellation based on timing, ignition position, and battery voltage
- Safety Feature: Auto shut-off when tilt exceeds 45° for more than 1 second
- Protection: Built-in short circuit and overcurrent protection on turn signal circuits
- Power Efficiency: Designed for low current consumption
- Voltage Range: Operates between 11VDC and 15VDC
- Build Quality: Robust, high-quality components
- Includes installation instructions.
Note: If you want to replace the seal for the stock H-D turn signal module connector, it is available as 709107.

Custom Dynamics, Smart turn signal module TSM-4

#709106

Stock:Yes