BIKE SELECTOR

20 of 1091 search results

Sort on:

Upgrade your Indian Motorcycle’s style and comfort with our Super Fat 2" Handlebars — designed for models with 1" risers and compatible with Throttle-by-Wire systems.
Killer Custom
New

Killer Custom, Killer Bull 2 Fat Handlebars 8". Black

#708963

Stock:No

Upgrade your Indian Motorcycle’s style and comfort with our Super Fat 2" Handlebars — designed for models with 1" risers and compatible with Throttle-by-Wire systems.
Killer Custom
New

Killer Custom, Killer Bull 2 Fat Handlebars 10". Black

#708964

Stock:No

Upgrade your Indian Motorcycle’s style and comfort with our Super Fat 2" Handlebars — designed for models with 1" risers and compatible with Throttle-by-Wire systems.
Killer Custom
New

Killer Custom, Killer Bull 2 Fat Handlebars 12". Black

#708965

Stock:No

Upgrade your Indian Motorcycle’s style and comfort with our Super Fat 2" Handlebars — designed for models with 1" risers and compatible with Throttle-by-Wire systems.
Killer Custom
New

Killer Custom, Killer Bull 2 Fat Handlebars 6". Black

#708962

Stock:No

Upgrade your Indian Motorcycle’s style and comfort with our Super Fat 2" Handlebars — designed for models with 1" risers and compatible with Throttle-by-Wire systems.
Killer Custom
New

Killer Custom, Killer Bull 2 Fat Handlebars 4". Black

#708961

Stock:No

With a massive 2" outside diameter. For models with 1-1/4" handlebar clamp diameter and 1" handlebar grip diameter. Gives the bike an aggressive, functional and modern look. With five laser-cut holes for internal wiring to offer a clean installation. Just thread the wires inside the bar and you're ready. Complete with special for easy mounting of OEM master cylinder. half clamp Integrates seamlessly with 1-1/4" risers and e-throttle (throttle by wire) setup. With a gloss black powder-coated finish for lasting good looks. - 2" (50mm) outside diameter - Stock 1-1/4" (32mm) handlebar clamp diameter - Stock 1" (25.4mm) mm grip diameter - E-throttle compatible - Heated grips compatible - For hydraulic operated clutch - 5 laser cut wiring holes - Complete with half clamp for master cylinder - Gloss black powder coated steel. Note: With approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Killer Custom
New

Killer Custom, Killer Bull 2" fat bar. FLTR/FLHR. 16" rise

#704847

Stock:No

With 11.5" risers & 3" rise handlebar for 14.5" overall tall. With Gold Ops risers for external wiring. This Performance Machine handlebar kit comes with an 1-1/4" 7050-T6 aluminum textured black handlebar with 3" rise, and slots for internal wiring. Bar is tapered down to 1" diameter for the controls. Compatible with both mechanical and electronic throttle. Risers are 1-1/4" I.D. with 11.5" rise and are manufactured from 6061-T6 CNC machined billet aluminum. - Dimensions: 14.5" tall overall, 32" wide, 3" pullback, 3" rise - Cable throttle and electronic throttle compatible - External wiring - Bar diameter: 1.25" tapers to 1" - CNC machined from billet aluminum. Note: This late model Phatbar & Riser Kit offers stock H-D digital gauge relocation compatibility right out of the box. When installing the stock H-D digital gauge you must separately order the gauge relocation kit, available as 999870 (rectangular style gauge) or 999871 (4" round style gauge). For 4" round gauge models with warning lights a warning light relocation kit is available as 999872.
Performance Machine
New

PM, 1-1/4" Phatbar & 14.5" riser kit. Gold Ops

#706960

Stock:Yes

The KR Low Bar brings your hands into the optimal position for superior control. The closer your hands are aligned with the center of the front end’s rotation, the more responsive your bike becomes. These handlebars are built for performance, with a refined black powder coat finish. Built to withstand the rigors of hard riding, with easy fitment and laser markings for perfect alignment during setup. Width: 29 inches | Pullback: 2.5 inches | Center-to-Center Height: 3.25 inches
Kraus
New

Kraus, KR Low Bar Handlebar 1". Black

#719171

Stock:Yes

With approval. Gloss black powder coated Super Fat 2" (51mm) diameter handlebar. - Extra tall. 43cm high x 80cm wide x 26cm lower width x 13cm pullback - Riser clamp area 1-1/4" (32mm) diameter x 140mm wide - E-throttle - Okay for heated grips - Slotted for internal wiring - Wiring slot facing down. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report. Note: Original risers of some models are too wide and may not fit. 979860 Kodlin Big Block risers are advised for all H-D with 1-1/4" (32mm) diameter at the risers, excl. M8 Breakout models for which 599573 Breakout lower risers are advised. When stock risers are a (too) tight fit do not install.
Kodlin
New

Kodlin, 2" Str8Up handlebar extra tall 43 cm. Black

#721046

Stock:No

With approval. Gloss black powder coated Super Fat 2" (51mm) diameter handlebar. - Tall. 38cm high x 81cm wide x 26cm lower width x 13cm pullback - Riser clamp area 1-1/4" (32mm) diameter x 140mm wide - E-throttle - Okay for heated grips - Slotted for internal wiring - Wiring slot facing down Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report. Note: Original risers of some models are too wide and may not fit. 979860 Kodlin Big Block risers are advised for all H-D with 1-1/4" (32mm) diameter at the risers, excl. M8 Breakout models for which 599573 Breakout lower risers are advised. When stock risers are a (too) tight fit do not install.
Kodlin
New

Kodlin, 2" Str8Up handlebar tall 38 cm. Black

#721041

Stock:Yes

With approval. Gloss black powder coated Super Fat 2" (51mm) diameter handlebar. Must be used with 1-1/4" inside diameter risers, like Kodlin Big Block (979860), Kodlin Spock (928030) or other aftermarket risers with 1-1/4" (32mm) clamping area. - Extra tall. 43cm high x 84cm wide x 30cm lower width x 13cm pullback - 1-1/4" (32mm) riser area - E-throttle - Okay for heated grips - Slotted for internal wiring - Wiring slot facing down. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report. Note: The lower overall width of this Fat Boy handlebar is 30cm, other 25-up Softails are just 26cm wide. The 30cm lower width is advised for a better optical fitment. Original risers of some models are too wide and may not fit. 979860 Kodlin Big Block risers (140mm overall width) are advised for all H-D with 1-1/4" (32mm) diameter at the risers. When stock risers are a (too) tight fit do not install.
Kodlin
New

Kodlin, 2" Str8Up handlebar extra tall 43 cm. Black

#721043

Stock:Yes

With approval. Gloss black powder coated Super Fat 2" (51mm) diameter handlebar. - Extra tall. 43cm high x 80cm wide x 26cm lower width x 13cm pullback - Riser clamp area 1-1/4" (32mm) diameter x 140mm wide - E-throttle - Okay for heated grips - Slotted for internal wiring - Wiring slot facing down Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Kodlin
New

Kodlin, 2" Str8Up handlebar extra tall 43 cm. Black

#721040

Stock:Yes

With approval. Gloss black powder coated Super Fat 2" (51mm) diameter handlebar. Must be used with 1-1/4" inside diameter risers, like Kodlin Big Block (979860), Kodlin Spock (928030) or other aftermarket risers with 1-1/4" (32mm) clamping area. - Medium height. 28cm high x 85cm wide x 30cm lower width x 13cm pullback - 1-1/4" (32mm) riser area - E-throttle - Okay for heated grips - Slotted for internal wiring - Wiring slot facing down. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report. Note: The lower overall width of this Fat Boy handlebar is 30cm, other 25-up Softails are just 26cm wide. The 30cm lower width is advised for a better optical fitment. Original risers of some models are too wide and may not fit. 979860 Kodlin Big Block risers (140mm overall width) are advised for all H-D with 1-1/4" (32mm) diameter at the risers. When stock risers are a (too) tight fit do not install.
Kodlin
New

Kodlin, 2" Str8Up handlebar medium 28 cm. Black

#721045

Stock:Yes

With approval. Gloss black powder coated Super Fat 2" (51mm) diameter handlebar. Must be used with 1-1/4" inside diameter risers, like Kodlin Big Block (979860), Kodlin Spock (928030) or other aftermarket risers with 1-1/4" (32mm) clamping area. - Tall. 38cm high x 82cm wide x 30cm lower width x 13cm pullback - 1-1/4" (32mm) riser area - E-throttle - Okay for heated grips - Slotted for internal wiring - Wiring slot facing down. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report. Note: The lower overall width of this Fat Boy handlebar is 30cm, other 25-up Softails are just 26cm wide. The 30cm lower width is advised for a better optical fitment. Original risers of some models are too wide and may not fit. 979860 Kodlin Big Block risers (140mm overall width) are advised for all H-D with 1-1/4" (32mm) diameter at the risers. When stock risers are a (too) tight fit do not install.
Kodlin
New

Kodlin, 2" Str8Up handlebar tall 38 cm. Black

#721044

Stock:Yes

With approval. Gloss black powder coated Super Fat 2" (51mm) diameter handlebar. - Medium height. 28cm high x 82cm wide x 26cm lower width x 13cm pullback - Riser clamp area 1-1/4" (32mm) diameter x 140mm wide - E-throttle - Okay for heated grips - Slotted for internal wiring - Wiring slot facing down Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Kodlin
New

Kodlin, 2" Str8Up handlebar medium 28 cm. Black

#721042

Stock:Yes

- Width: 812mm (32") with installed E-throttle module - Height: 82 mm (3.2") - Pullback: 89 mm (3.5"). Black hard anodized 6061 T6 aluminum. Riser clamping area 1-1/4" (32mm), conically reduced to 1" (25.4mm) at the handlebar ends. Handlebar has 3.6mm wall thickness at riser clamp area for unmatched strength. Complete with lasered Rick's logo. - Weight 600 gram - Design based on OEM 55800858 bar - Compatible with H-D's heated grips - Aggressive Clubstyle moto bar look - Drilled for internal wiring. Note: With approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Rick's Motorcycles
New

Rick's Motorcycles, Clubstyle Performance 3 handlebar. Black

#709548

Stock:No

- Width: 832mm (32.75") - Height: 82 mm (3.2") - Pullback: 92 mm (3.6"). Black hard anodized 6061 T6 aluminum. Riser clamping area 1-1/4" (32mm), conically reduced to 1" (25.4mm) at the handlebar ends. Handlebar has 3.6mm wall thickness at riser clamp area for unmatched strength. Complete with lasered Rick's logo. - Weight 600 gram - Design based on OEM 55800858 bar - Compatible with H-D's heated grips - Aggressive Clubstyle moto bar look - Drilled for internal wiring. Note: With approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Rick's Motorcycles
New

Rick's Motorcycles, Clubstyle Performance 3T handlebar.Black

#709551

Stock:No

- Width: 832 mm (32.75") with installed E-throttle module - Height: 112 mm (4.35") - Pullback: 96 mm (3.8") Black hard anodized 6061 T6 aluminum. Riser clamping area 1-1/4" (32mm), conically reduced to 1" (25.4mm) at the handlebar ends. Handlebar has 3.6mm wall thickness at riser clamp area for unmatched strength. Complete with lasered Rick's logo. - Weight 600 gram - Design based on OEM 55800858 bar - Compatible with H-D's heated grips - Aggressive Clubstyle moto bar look - Drilled for internal wiring. Note: With approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Rick's Motorcycles
New

Rick's Motorcycles, Clubstyle Performance 5 handlebar. Black

#709549

Stock:No

1 1/2" (1.5") Mini Ape Handlebar. Aggressive, functional, and modern look. It has three holes for internal wiring. Fits original risers: width: 880 mm, Height: 150 mm, Pullback: 100 mm.
Killer Custom
New

Killer Custom, Tomahawk Series Mini Ape 1 1/2"HandleBar. Bla

#708950

Stock:No

- 1" diameter high-strength seamless double-butted 7075-T6 alloy - Shot-peened and hard-anodized for improved durability - Slotted for Internal Wiring and Matched to 2023+ CVO Model Housings - Knurled clutch slide for improved adhesion with use of slip-on style grips. - Designed to work with Harley-Davidson "Heated" Grip Systems - Matte Black with Gloss Black Logos - DIMENSIONS: Width=32.25", Height=4.75" Rise=3.75" Sweep=2.125" (13 Degrees) - Clamping surface opening: 5.5"
ODI
New

ODI, CVO/Moto 1" handlebar. Matte black

#721026

Stock:Yes