Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 633 search results

Sort on:

Sort on:

Raw machined finish without coating.
With special machined extensions used with Kraus Veloci and Raptor pullback plates only.
Used to marginally extend Kraus' Isolated, Workman and Dagger risers. Perfect to precision-adjust your handlebar to your riding position, instead of the other way around. CNC machined billet aluminum with correct installation hardware for a seamless fit.
Note: Will not fit Kraus T-Rex and Dagger pullback plates

Kraus, 1 inch (25.4mm) riser extension kit. Machined Finish

#708980

Stock:Yes

CNC billet aluminum construction. Black Contrast Machined finish.
For handlebars with a 1" (25.4mm) clamping diameter.
With a two-piece top clamp with a 4-bolt clamping system (4 bolts for 2 risers). A slim construction and perfect for lower bars where rotational forces are not as high as found in higher handlebars.
12-13 threaded. With a low 1.5" (3.8cm) rise and designed to give ultimate strength. Complete with stainless top clamp bolts.

Burly, Reaper riser kit. 1.5" high. 4-bolt 2-piece. Black CM

#719917

Stock:No

Raw machined aluminum finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Straight Risers. 10" rise. Raw

#708344

Stock:Yes

Raw machined aluminum finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Straight Risers. 8" rise. Raw

#708356

Stock:Yes

Black anodized finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 5" rise. Black

#708347

Stock:Yes

Raw machined uncoated finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 5" rise. Raw

#708348

Stock:Yes

Black anodized finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Straight Risers. 8" rise. Black

#708355

Stock:Yes

Black anodized finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Straight Risers. 10" rise. Black

#708343

Stock:Yes

Raw machined uncoated finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 8" rise. Raw

#708350

Stock:Yes

CNC billet aluminum construction. Black Contrast Machined finish.
For handlebars with a 1" (25.4mm) clamping diameter.
With a one-piece top clamp with a 8-bolt clamping system. Fit models with 3.5" center to center triple tree mount holes. The one-piece top clamps combined with the 8-bolt clamping force is a great set-up for to help combat riser twisting forces with wide bars and help prevent handlebars rotating in the risers. This additional 'torque & twist resistance' is great for higher and wider handlebars.
12-13 threaded. With a low 1.5" (3.8cm) rise and designed to give ultimate strength. Complete with stainless top clamp bolts.

Burly, Reaper riser kit. 1.5" high. 8-bolt 1-piece. Black CM

#719914

Stock:Yes

CNC billet aluminum construction.
For handlebars with a 1" (25.4mm) clamping diameter.
With a two-piece 8-bolt clamping system (8 bolts for 2 risers). Designed to provide additional clamping force to help prevent handlebars rotating in the risers. This additional 'torque resistance' is especially useful with higher handlebars.
12-13 threaded. With a low 1.5" (3.8cm) rise and designed to give ultimate strength. Complete with stainless top clamp bolts.

Burly, Reaper riser kit. 1.5" high. 8-bolt 2-piece. Chrome

#719908

Stock:Yes

Raw machined aluminum uncoated finish.
Fits models with 1-1/8" (28mm) handlebar clamping area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
The 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 5" rise. Raw

#708317

Stock:Yes

Raw machined aluminum uncoated finish.
Fits models with 1-1/8" (28mm) handlebar clamping area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
The 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 10" rise. Raw

#708319

Stock:Yes

Raw machined aluminum uncoated finish.
Fits models with 1-1/8" (28mm) handlebar clamping area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
The 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 12" rise. Raw

#708320

Stock:Yes

Black anodized finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 12" rise. Black

#708353

Stock:Yes

Raw machined uncoated finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 10" rise. Raw

#708352

Stock:Yes

Raw machined aluminum finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Straight Risers. 12" rise. Raw

#708346

Stock:Yes

Raw machined uncoated finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 12" rise. Raw

#708354

Stock:Yes

Raw CNC machined un-coated aluminum.
With 1" (25.4mm) diameter handlebar clamp area.
This is the standard replacement Kraus Top Plate. Fits all Kraus Isolated Straight and Kickback risers. Used when reverting the topless kickback riser back from Digital Softail or Road King to the standard top clamp or as stock replacement.

Kraus, Isolated Riser 1" Top Plate. Raw

#708312

Stock:Yes

Raw CNC machined un-coated aluminum.
With 1-1/8" (28.6mm) diameter handlebar clamp area.
This is the standard replacement Kraus Top Plate. Fits all Kraus Isolated Straight and Kickback risers. Used when reverting the topless kickback riser back from Digital Softail or Road King to the standard top clamp or as stock replacement.

Kraus, Isolated Riser 1-1/8" Top Plate. Raw

#708313

Stock:Yes