BIKE SELECTOR

20 of 46 search results

Sort on:

Stainless steel front 5 hole brake rotor. Outside diameter 320 mm (12-5/8") Inner diameter 164 mm Thickness 5 mm (3/16")
Galfer
New

Galfer, Fixed brake rotor front. Silver

#718630

Stock:Yes

Black cap. Touring models have the oil tank mounted under the transmission. The engine, with two massive pistons going up and down, breathes in to the oil tank. This system is a way to vent the oil tank to help reduce pressure build-up and reduce power robbing pressures and stops dipstick blow-out. Comes as complete kit with filter, braided clear PVC covered lines and, if required, gaskets. Note: Early Touring models require dipstick housing removal. Gaskets are supplied where required.
Feuling

Feuling, oil tank breather kit. Black. Touring

#566062

Stock:Yes

90° elbow adapter. 1/4 NPT male to 1/4 NPT female threaded.
Gardner-Westcott

Adapter oil line fitting, 90 degrees. 1/4" NPT. Chrome

#905302

Stock:Yes

3" long pipe extension with 1/8" NPT male ends.
Gardner-Westcott

Oil gauge fitting, 3" extension pipe, 1/8" NPT . Chrome

#905395

Stock:Yes

Stainless steel. 1/8 NPT male to 1/8 NPT female threaded. Used as 45° adapter to give the rider a better viewing angle on the oil gauge while riding. Used with 905380 (chrome) or 563332 (stainless) fitting, which installs directly to the crankcase of 38-99 B.T. models (excl. Twin Cam)
Streethogs

Streethogs, adapter fitting, 45 degrees. 1/8" NPT. Stainless

#900879

Stock:No

Black anodized. With 1 clamp. Billet aluminum oil cooler with a built-in gauge. Includes a #6 AN fitting. Clamps to frame tubes of 1", 1-1/8", 1-1/4" and 1-1/2" diameter. Filler sleeves included to compensate for the mentioned frame tube diameters. Will work in many stock or custom applications. Approx. dimensions: 22cm long x 5.6cm diameter.
MCS

Billet oil cooler, with oil pressure gauge. Black

#905419

Stock:Yes

Chrome. With 1 clamp. Billet aluminum oil cooler with a built-in gauge. Includes a #6 AN fitting. Clamps to frame tubes of 1", 1-1/8", 1-1/4" and 1 1/2" diameter. Filler sleeves included to compensate for the mentioned frame tube diameters. Will work in many stock or custom applications. Approx. dimensions: 22cm long x 5.6cm diameter.
MCS

Billet oil cooler, with oil pressure gauge. Chrome

#905418

Stock:Yes

Black anodized. With 1 clamp. Billet aluminum oil cooler with a built-in gauge. Includes a #6 AN fitting. Clamps to frame tubes of 1", 1-1/8", 1-1/4" and 1 1/2" diameter. Filler sleeves included to compensate for the mentioned frame tube diameters. Will work in many stock or custom applications. Approx. dimensions: 22cm long x 5.6cm diameter.
MCS

Billet oil cooler, with temperature gauge. Black

#905417

Stock:Yes

Chrome. With 1 clamp. Billet aluminum oil cooler with a built-in gauge. Includes a #6 AN fitting. Clamps to frame tubes of 1", 1-1/8", 1-1/4" and 1 1/2" diameter. Filler sleeves included to compensate for the mentioned frame tube diameters. Will work in many stock or custom applications. Approx. dimensions: 22cm long x 5.6cm diameter.
MCS

Billet oil cooler, with temperature gauge. Chrome

#905416

Stock:No

Raw machined aluminum finish. Used to install a 1.5" (38mm) oil pressure gauge to the handlebar. With 1/8 NPT treaded adapter. Manufactured of 6061 billet aluminum and comes with stainless Allen head bolts and a 1/8 NPT to -3AN adapter fitting. USA made.
Feuling

Feuling, 1" handlebar oil pressure gauge mount. Raw

#707283

Stock:Yes

Used to install a 1.5" (38mm) oil pressure gauge to the handlebar. With 1/8 NPT treaded adapter. Manufactured of 6061 billet aluminum and comes with stainless Allen head bolts and a 1/8 NPT to -3AN adapter fitting. USA made.
Feuling

Feuling, 1" handlebar oil pressure gauge mount. Polished

#707284

Stock:Yes

Machined aluminum finish. Used to install a 1.5" (38mm) oil pressure gauge to the handlebar. With 1/8 NPT treaded adapter. Manufactured of 6061 billet aluminum and comes with stainless Allen head bolts and a 1/8 NPT to -3AN adapter fitting. USA made.
Feuling

Feuling, 1-1/4" handlebar oil pressure gauge mount. Raw

#707287

Stock:Yes

Used to install a 1.5" (38mm) oil pressure gauge to the handlebar. With 1/8 NPT treaded adapter. Manufactured of 6061 billet aluminum and comes with stainless Allen head bolts and a 1/8 NPT to -3AN adapter fitting. USA made.
Feuling

Feuling, 1-1/4" handlebar oil pressure gauge mount. Polished

#707288

Stock:Yes

Black anodized finish. Used to install a 1.5" (38mm) oil pressure gauge to the handlebar. With 1/8 NPT treaded adapter. Manufactured of 6061 billet aluminum and comes with stainless Allen head bolts and a 1/8 NPT to -3AN adapter fitting. USA made.
Feuling

Feuling, 1" handlebar oil pressure gauge mount. Black

#707281

Stock:Yes

Used to install a 1.5" (38mm) oil pressure gauge to the handlebar. With 1/8 NPT treaded adapter. Manufactured of 6061 billet aluminum and comes with stainless Allen head bolts and a 1/8 NPT to -3AN adapter fitting. USA made.
Feuling

Feuling, 1-1/4" handlebar oil pressure gauge mount. Chrome

#707286

Stock:Yes

With regular bottom fitting placement. White face. 1.5" (38mm) diameter. Quality liquid silicone filled. Stainless housing. 0-100 PSI scale. Genuine glass lens. 1/8 NPT threaded fitting. Accuracy 3%.
Feuling

Feuling, liquid filled 100PSI oil pressure gauge. White

#707274

Stock:Yes

With custom bottom fitting placement. Black face. 1.5" (38mm) diameter. Quality liquid silicone filled. Stainless housing. 0-100 PSI scale. Genuine glass lens. 1/8 NPT threaded fitting. Accuracy 3%.
Feuling

Feuling, liquid filled 100PSI oil pressure gauge. Black

#707275

Stock:Yes

Used to additionally check engine oil pressure with a liquid filled mechanical stainless gauge, with PSI face, while keeping your factory electronic gauge and or low oil pressure indicator light hooked up. Kit includes all needed fittings to hook up the engine. Line is 45" (114cm) long. Hooks up to existing oil psi ascending unit port, oil line routes up the right side frame rail, gauge fastens to the handlebars using zip-ties and spacers. Hooks up to the engine case via the pressure port to the oil filter, remove the factory 1/4 NPT plug and install the Feuling fittings.
Feuling

Feuling, remote oil pressure gauge kit. Black

#707279

Stock:No

Black anodized finish. Used to install a 1.5" (38mm) oil pressure gauge to the handlebar. With 1/8 NPT treaded adapter. Manufactured of 6061 billet aluminum and comes with stainless Allen head bolts and a 1/8 NPT to -3AN adapter fitting. USA made.
Feuling

Feuling, 1-1/4" handlebar oil pressure gauge mount. Black

#707285

Stock:No

Used to install a 1.5" (38mm) oil pressure gauge to the handlebar. With 1/8 NPT treaded adapter. Manufactured of 6061 billet aluminum and comes with stainless Allen head bolts and a 1/8 NPT to -3AN adapter fitting. USA made.
Feuling

Feuling, 1" handlebar oil pressure gauge mount. Chrome

#707282

Stock:Yes