Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 92 search results

Sort on:

Sort on:

8A 12V charger. For 3Ah to 180Ah lead-acid (AGM, GEL, EFB, MF, CaCa) and lithium batteries. The CS ONE has APTO™ (Adaptive Charging) technology to recognise the type of battery you want to charge and tells how long it will need to charge it. There are no buttons on the CS ONE, just connect any lead-acid or lithium battery and simply charge. Polarity free clamps mean you don’t even need to worry
about which clamp goes where, so you’ll never make a wrong connection again. The clamps are spark free too, so don’t worry if you accidentally touch them together Unlock additional features using the Bluetooth® enabled CTEK App. Select ‘RECOND’ to restore and recondition your battery. Choose ‘WAKE UP’ for lithium batteries with under voltage protection or to bring deeply discharged lead-acid batteries back to life. Select ‘SUPPLY’ to turn the CS ONE into a useful 12 V supply

CTEK, CS ONE Battery charger. UK wall plug

#954369

Stock:Yes

Standard duty booster cables. 12ft. (3.65m), 4 gauge (5.19 ø mm). Soft blend PVC outer jacket for use with -40° to +140°F (-40° to 60°C). Comes with alligator style clamps.

Standard Co, Battery jumper cables 400A

#951769

Stock:Yes

Std duty booster cables. 12ft. (3.65m), 8 gauge (3.26 ø mm). Soft blend PVC outer jacket for use with -40° to +140°F (-40° to 60°C). Comes with alligator style clamps.

Standard Co, Battery jumper cables 400A

#951768

Stock:No

8A 12V charger. For 3Ah to 180Ah lead-acid (AGM, GEL, EFB, MF, CaCa) and lithium batteries. The CS ONE has APTO™ (Adaptive Charging) technology to recognise the type of battery you want to charge and tells how long it will need to charge it. There are no buttons on the CS ONE, just connect any lead-acid or lithium battery and simply charge. Polarity free clamps mean you don’t even need to worry
about which clamp goes where, so you’ll never make a wrong connection again. The clamps are spark free too, so don’t worry if you accidentally touch them together Unlock additional features using the Bluetooth® enabled CTEK App. Select ‘RECOND’ to restore and recondition your battery. Choose ‘WAKE UP’ for lithium batteries with under voltage protection or to bring deeply discharged lead-acid batteries back to life. Select ‘SUPPLY’ to turn the CS ONE into a useful 12 V supply

CTEK, CS ONE Battery charger. EU wall plug

#954368

Stock:Yes

EU wall plug. 4 bank charger 12V. Allows charging / maintaining 1 up to 4 batteries at once. Dimensions: 19.5cm wide x 9cm high x 17.5cm Deep.Microprocessor controlled, 100-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program, initialization / bulk charge / absorption mode / float mode, as required. A red LED indicates a 'dead' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process, until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. Charges all flooded, sealed, maintenance free, AGM and lead acid batteries. CE approved.
Note: When using multi-bank chargers, with the batteries in the bikes, you can order 990048 quick-disconnect cable which offers 25 foot (7.5 meters) of convenience.

Battery Tender, International Plus - 1.25A charger

#990042

Stock:No

UK wall plug. 4.0A. Selectable 6/12V. Selectable Lithium or flooded, sealed, maintenance free, AGM and lead acid batteries. Microprocessor controlled, 110-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program, initialization / bulk charge / absorption mode / float mode, as required. A red LED indicates a 'dead' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process, until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. CE approved. Dimensions 17.2cm x 9.3cm x 4.9cm.

Battery Tender, selectable charger. Lithium & 12/6V

#905508

Stock:No

UK wall plug. 1.25A. Selectable 6/12V. Selectable Lithium or flooded, sealed, maintenance free, AGM and lead acid batteries. Microprocessor controlled, 110-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program, initialization / bulk charge / absorption mode / float mode, as required. A red LED indicates a 'dead' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process, until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. CE approved. Dimensions 17.2cm x 9.3cm x 4.9cm.

Battery Tender, selectable charger. Lithium & 12/6V

#905506

Stock:No

UK wall plug. Charges all flooded, sealed, maintenance free, AGM and lead acid batteries. Water resistant and shock/vibration resistant with a weight less than 2kg. A compact and sturdy charger, ready for portable operations or permanent mounting in a garage etc. Microprocessor controlled, 110-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program, initialization / bulk charge / absorption mode / float mode, as required. A red LED indicates a 'dead' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process, until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. CE approved.

Battery Tender, Power Tender 12V@5A High Efficiency

#501303

Stock:No

UK wall plug. 4 bank charger 12V. Allows charging / maintaining 1 up to 4 batteries at once. Dimensions: 19.5cm wide x 9cm high x 17.5cm Deep.Microprocessor controlled, 100-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program, initialization / bulk charge / absorption mode / float mode, as required. A red LED indicates a 'dead' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process, until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. Charges all flooded, sealed, maintenance free, AGM and lead acid batteries. CE approved.
Note: When using multi-bank chargers, with the batteries in the bikes, you can order 990048 quick-disconnect cable which offers 25 foot (7.5 meters) of convenience.

Battery Tender, International Plus - 1.25A charger

#990044

Stock:Yes

UK wall plug. 12V 0.8A. For up to 10Ah batteries. Selectable Lithium or flooded, sealed, maintenance free, AGM and lead acid batteries. Microprocessor controlled, 110-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program, initialization / bulk charge / absorption mode / float mode, as required. A red LED indicates a 'dead' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process, until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. CE approved. Dimensions 8.3cm x 5cm x 3.5cm.

Battery Tender, Junior 800 - selectable (UK)

#905503

Stock:No

UK wall plug. 2 bank charger 12V. Allows charging / maintaining 1 or 2 batteries at once. Dimensions: 11.5cm wide x 8.5cm high x 17.5cm deep.Microprocessor controlled, 100-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program, initialization / bulk charge / absorption mode / float mode, as required. A red LED indicates a 'dead' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process, until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. Charges all flooded, sealed, maintenance free, AGM and lead acid batteries. CE approved.
Note: When using multi-bank chargers, with the batteries in the bikes, you can order 990048 quick-disconnect cable which offers 25 foot (7.5 meters) of convenience.

Battery Tender, International Plus - 1.25A charger

#990078

Stock:Yes

This QDC (Quick Disconnect Charger) plugs directly into the standard Battery Tender quick disconnect charge cable that is already installed on your bike. With LCD display that shows actual voltage. The three LEDs show 'Green' greater than 12.0V, 'Yellow' 12.0V to 11.6V (low)and 'Red' Less than 11.6V (discharged). Dimensions 13cm long x 3cm thick.

Battery Tender, QDC volt meter

#991305

Stock:No

Max 30A.

Shido, battery charge cable with crocodile clamps

#932964

Stock:Yes

For wet lead-acid / AGM batteries (excl. lithium batteries). Max 4.0A. With 6mm eyelets. With green/amber/red LED charge indicators

Shido, quick connect battery charge/monitor cable

#932962

Stock:Yes

With EU wall plug. 4-step 6V/12V ChargeMatic Battery charger-maintainer. Will charge any 6V or 12V lead-acid battery, both starter and deep cycle. Temperature protected charger with IUoU 4-step charging program, including reversion from 'maintenance' float stage if high current is drawn during storage charging. Simply select 6 or 12 voltage, hook up the battery and this temperature compensated, 4-step charger will do the rest.
- Charging Amps: 1.2A (temperature protected)
- 4-step. Bulk, Absorption, maintain & revert
- Indoor (lowest temperature: -4°F / -20°C)
- Low Volt Start of 2V for 6 or 12V batteries
- For 6V & 12V Lead Acid, AGM, GEL lead-acid batteries, starter and deep cycle, up to 50Ah
- EU 220-240V 50-60Hz North America: 110-120V 50-60Hz.
- Standard case (vented)
- Incl. 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector, a fused battery lead & standard battery clip set
- No risk of overcharging
- Sparks suppressed
- Safe for long-term battery maintenance
- Automatic shut-down if short-circuited or battery disconnected

Tecmate OptiMATE, AccuMate 6/12 1.2A battery charger

#941412

Stock:No

With EU wall plug. The power sport OEM recommended load tester, power desulphator and charger for all types of 12V lead-acid batteries. The BatteryMate has been saving batteries for 25 years!
- New battery activation – 30 minute activation charge for new batteries that have received acid just prior to charging, such as STD flooded batteries with removable filler caps and AGM-MF ‘dry-charged’ batteries that are delivered with a separate custom acid pack
- True load tester selectable from 15A to 150A – Automatically tests battery cranking amps up to 330CCA. 3 second test simulates normal engine cranking / start, 15 second test checks battery health
- Powersport specific charging algorithm – 4 step charging method recovers any 12V battery. MF mode allows up to 16.9V for ‘dry-charged’ AGM batteries
- Temperature regulated charging – Charge voltage is adjusted according to ambient temperature. (-4mV/°C/cell above/below 68°F/20°C)
- Accurate voltage sensing. Charge leads have integrated voltage sense wires for exact voltage measurement at the battery
- Easy to use. 6 position combination selector allows selection of correct test and charge current for connected battery. TEST and then select max. charge time according to result, press 'charge' button. Program completes charging automatically and then tests the battery
- Charging Amps: 9A maximum; 1, 2, 3, 5, 7, 9 Amp selection
- Testing Amps: 150A maximum; 15, 35, 50, 70, 100, 150 Amp selection
- Indoor / workshop environment (lowest temperature: -4°F / -20°C)
- Save: Low Volt Start of 1V + high power desulphation recovery
- For Lead Acid, AGM & GEL 12V batteries from 2 – 40Ah
- Selectable 110-120VAC / 220-240VAC 50-60Hz
- On/Off power switch and replaceable fuse protection
- Vented industrial table top case
- Incl. 6ft / 180cm AC supply lead and 1 pair high current 6ft / 180cm charge leads ending in heavy duty battery clamps
- No risk of overcharging
- Sparks suppressed
- Safe for long-term battery maintenance
- Automatic shut-down if short-circuited or battery disconnected

Tecmate OptiMATE, BatteryMate 150/9 battery charger

#941415

Stock:Yes

MXS charger wall mount. Allows you to store the MSX charger and also stores the clamp-on charge cables, when not in use. Fits all MXS chargers, both 3.8A (906046 / 906047) and 5A (906048 / 906049) models. The open frame design allows easy access to charger functions.

CTEK, MXS 3.8A and 5.0A battery charger mounting bracket

#906057

Stock:Yes

CTEK’s charger BUMPER for CT5 Powersport chargers. This is a protective silicone rubber bumper that fits snugly around the charger body and offers additional grip and damage protection.

CTEK, CT5 protective charger bumper

#906063

Stock:Yes

With EU wall plug. Will charge 12V & 6V lead-acid, AGM and Lithium LiFePO4 batteries. Selectable 1A or 4A charging. With digital screen. Can be used as trickle charger.
- Specific AGM mode for sealed batteries
- Digital screen with live voltage reading
- Hook attachment
- Suitable for 6V and 12V batteries
- 1A and 4A selectable charge
- Clear split between Lithium and lead-acid charging modes and algorithms
- Battery Recovery for deeply discharged batteries
- Battery health check after charging
- Maintaining mode, with 4 hour intervals voltage checks
- Protected against reverse polarity, overcharging, overcurrent, overheating and short-circuits
- User friendly detection for reverse polarity, low-voltage or damaged batteries
- IP 65 splash and dust proof for outdoor use
- Adjusts for varying A/C line voltage and delivers consistent charging current
- 8 step lead acid charging
- 7-step Lithium charging
- Input: 220-240V AC 50-60Hz
- Output: 6V or 12V 1A or 4A DC
- Dimensions: 210 x 87 x 50mm
- Weight: 0.6 kg
- IP rating: IP 65
- Battery: 4-80 Ah > Charge, 4 - 120 Ah > Maintenance

Shido, dual battery charger 12V DC 4.0. (EU)

#932959

Stock:No

With EU wall plug. 9-step 12V 5Amp charger for 12V starter and deep cycle Lead Acid, AGM, GEL & deep cycle 12V batteries from 3 – 240Ah. Perfect for accurate temperature controlled charging and unsupervised safe long term maintenance.
- Charge – 14.4V for STD batteries / 14.7V for premium AGM or Deep Cycle voltage selectable
- Charging Amps: 5A (Ampmatic)
- AmpMatic charge control: adjusts current to suit any battery size (3Ah to 240Ah) or condition for fastest and most complete charge
- 'Power Supply' mode (13.6V) delivers stable power for vehicle system reprogramming, show room vehicle demo or retaining memorised settings when battery cables are disconnected to fit powered accessories or replace the battery
- Save: Low Volt Start of 0.5V (12V) + 2-step safe pulse recovery
- For Lead Acid, AGM & GEL (3Ah to 240Ah)
- Input: Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed
- Weatherproof case with wall mounts
- Incl. with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead & standard battery clip set included
- No risk of overcharging
- Sparks suppressed
- Safe for vehicle electronics
- Safe for long-term battery maintenance
- Automatic shut-down if short-circuited or battery disconnected

Tecmate OptiMATE 6, Select battery charger

#941208

Stock:No