Motorcycle Storehouse

Select your bike

BIKE SELECTOR

9 of 9 search results

Sort on:

Sort on:

Used to install the tapered roller (conical) motorcycle frame neck bearings with an inner diameter of 25mm to 35mm, to the lower triple tree. Does not damage bearing.
- Build Series: 71-M
- Inside Diameter of bearing 25mm to 35mm
- Number of Impact Sleeves: 1
- Diameter of Impact Sleeves: 32mm
- Length of Impact Sleeve: 360mm
- Number Of Rings: 4
- Weight 1.935kg
- Packed in sturdy carrying case
- The following are also included in the set: 1 clipping device for fluid hoses. Specifically intended for the replacement of the steering head bearings
- Instructions and conversion table in the cover
- Secure storage in special foam
- The special shape of the impact ring allows for the power to be transmitted to the internal ring during pressing or hammering of the tapered roller bearing. This way the bearing cage is not damaged and can be re-used when desired
- The combination of impact ring and impact sleeve required for the installation of the ball bearing can be found in the table inside the case cover
- The steering stem, bearing races and gaskets of the bearing will not be damaged
- The impact rings have a rubber ring and ensure locking at the strike pipes
- With the combination of the impact ring and the impact pipe, the installation forces are never directed through the rolling elements of the bearing
- Strong design, high performance and long service life
- A tube of KUKKO special grease included for the pressure spindle
- Complete set in a sturdy carrying box.
Note: To install the steering head / frame neck bearing races see Kukko 951178 which will drive 40mm to 54mm bearing races.

Kukko, steering head bearing mount kit

#951111

Stock:Yes

Universal puller for steering head bearings and other motorcycle bearings. Professional frame neck bearing puller that can be used on 98% of all motorcycles. Set includes a 2-arm 'Cobra' extended puller, to reach the lower steering head bearing. The special clamp holds the puller arms tight to prevent 'slip-off'.
- Includes a 170mm spindle
- Also includes a valve cap remover to check air pressure without getting your hands dirty
- Complete set in a sturdy carrying box.

Kukko, universal frame bearing puller set

#951177

Stock:Yes

Designed to drive-in the steering head / frame neck bearing races of the tapered roller bearings. Will also work for pressing in wheel bearings and driving in many other bearings. Complete with sturdy carrying case.
Includes bearing drive diameters:
- 2 x 40.0mm
- 2 x 44.0mm
- 2 x 46.0mm
- 2 x 50.0mm
- 2 x 54.0mm
Note: To install the lower steering head bearing on the fork stem / lower triple tree, please use Kukko 951111 steering head bearing mount kit.

Kukko, steering head bearing installer tool

#951178

Stock:Yes

Springer forks, remove & install rocker bushings

Colony rocker stud bushing tool

#989749

Stock:Yes

- Used in the removal and installation of fork caps on H-D touring models with 49mm forks
- Protective O-ring reduces the risk of damage to the fork caps during removal and installation
- 1/2 inch square drive
- Machined from 6061-T6 aluminum with durable blue anodizing and laser engraved identification markings

Motion Pro, H-D 49mm fork cap hex tool

#701696

Stock:Yes

Used to help with the Cartridge installation for specific Kraus and Öhlins, cartridges and forks..
Designed and engineered to be used with Kraus KRT forks (FF52X), Kraus Dynamoto forks (FGRT 205s), Öhlins FKS 212, FKS 221, FKS 228, and FKS 508 model forks.
Tool comes with M8x1.25, M10x1.25, and M12x1.25 thread sizes allowing it to be used in other applications as well.

Kraus, cartridge pull rod tool

#984641

Stock:Yes

- Removes and installs tapered roller bearing at base of steering stem
- Fits most full size motorcycles with tapered roller bearing at base of steering stem
- Includes 26 mm, 28 mm, 30-31 mm, 35-36 mm race protectors for installing bearing
- Blue anodized bearing protectors are made from 6061 billet aluminum and laser etched for easy identification
- Compact design will fit within most steering stops on lower triple clamp
- Protects steering stem during bearing removal and installation process
- Will not work on applications using loose ball-bearing or caged ball-bearing type steering bearings

Motion Pro, steering head bearing tool

#979354

Stock:Yes

Fits tapered steering bearings 41-42 mm, 47-48 mm, 51-52 mm and 55-56 mm; double sided drivers; Safely installs the tapered bearing race in the frame; durable 6061-T6 anodized aluminum; Ergonomic handle

Motion Pro steering head bearing race driver

#580894

Stock:Yes

Used to pull and install bearing steering races in the frame neck, without a hammer. Puller design ensures the race is pulled straight without damage to the frame. The hardened steel puller jaws engage securely on inner bearing lip for race removal. The hardened steel driver precisely fits the taper of the bearing race during installation.

Motion Pro, fork stem bearing race tool

#597976

Stock:No