Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 27 search results

Sort on:

Sort on:

18mm socket, for most 12mm threaded spark plugs. Thin wall extra long socket designed to reach plugs in a deep cavity. Can be driven with 3/8" drive ratchet, a 3/16" wrench or with a bar or screwdriver through the 8.5mm hole. Outer diameter 23.94mm.

Motion Pro, 18mm spark plug socket. Thin wall

#597942

Stock:Yes

Used to check spark plug, spark plug wires and coil. The grooved end of tool is placed over the spark plug wire of running engine. The bulb will flash, when the spark plug is working.

Lisle, spark indicator tool

#530716

Stock:Yes

3/8" drive. Comes with a metal clip on the inside to hold the spark plug for installing and removing in deep and hard to reach spaces.
- 3/8" drive
- Outside Diameter: 28mm
- Length: 65mm
- Material: Chrome Vanadium

Sonic, spark plug socket with clip. 21mm

#954114

Stock:Yes

Replacement for 530792 spark tester tool.

Lisle, replacement bulb

#530725

Stock:Yes

Used to set correct spark plug gap with the built-in electrode gapping tools. The round wire allows correct gap measurements from all angles.
For points ignitions
Measures 0.025" to 0.045" (0.64mm to 1.14mm)

Lang Tools spark plug gauge/gapper points ignition

#516139

Stock:No

21mm socket, for most 14mm threaded spark plugs. Used with a 3/8" square drive or 17mm wrench. Allows a fixed or up to a 15° angle swivel drive when used with the 567325 optional wobble extension bar. The wobble extension is used to gain better (angled) access to hard to reach places.

Motion Pro, Pro Plug Socket™ 21mm spark plug socket

#567327

Stock:Yes

16mm socket, for most 10mm threaded spark plugs. Used with a 3/8" square drive or 17mm wrench. Allows a fixed or up to a 15° angle swivel drive when used with the 567325 optional wobble extension bar. The wobble extension is used to gain better (angled) access to hard to reach places.

Motion Pro, Pro Plug Socket™ 16mm spark plug socket

#567328

Stock:Yes

'Limited Access', great for use in confined spaces. Used to clean-up 14mm threaded spark plug and oxygen sensor threads. Use with 3/8" drive rachet or extension bar.

Lisle, 14mm threaded spark plug thread chaser

#530721

Stock:Yes

Plug ignition wire booth on to tester and crank engine, plug need not be removed. Calibration scew of tool is adjustable to simulate correct spark plug gap.

Lisle, ignition spark tester

#530831

Stock:Yes

Used to correct and measure spark plug gap. Comes with two built-in electrode adjusting tools. Measures 0.025" to 0.045" (inches) and 0.64mm to 1.14mm (metric). For points ignition systems.

Lisle, spark plug gapper/gauge tool

#530843

Stock:Yes

Used for a quick visual spark/no-spark ignition check. Works with all ignition systems.

Note: See 530725 for replacement bulb.

Lisle, in-line spark tester tool

#530792

Stock:Yes

3/8" drive. Does not have a clip on the inside to hold the spark plug for installing and removing in deep and hard to reach spaces.
- 3/8" drive
- Outside Diameter: 28mm
- Length: 65mm
- Material: Chrome Vanadium

Sonic, spark plug socket. 21mm

#954113

Stock:Yes

Slim skeleton design, but an ultra strong tool steel construction with an outer diameter of just 19.25mm with an innovative mechanical internal plug retention system. For a 3/8" drive or 17mm wrench. Can be used as an axle holding tool on bikes with 17 mm internal hex axles. The through hole allows use of screwdriver or holding rod. Socket is black oxide coated with laser etched markings.

Motion Pro, 14mm Pro Plug™ spark plug socket

#597941

Stock:Yes

Fits straight-slot timing plugs on most motorcycles and ATVs. Blade sizes are 16mm (5/8"), 22mm (7/8") and 38mm (1-1/2").

Motion Pro, timing plug wrench

#597944

Stock:No

Connects to the spark plug wire and allows checking spark jump strength. The larger the gap your spark will jump, the stronger the ignition system is. Spark gap is adjustable from 0 to 10mm. Will allow ignition testing on most motorcycles, watercraft, ATVs & snowmobiles.

Motion Pro, spark tester

#597943

Stock:Yes

3/8" drive. Comes with a metal clip on the inside to hold the spark plug for installing and removing in deep and hard to reach spaces.
- 3/8" drive
- Outside Diameter: 22mm
- Length: 65mm
- Material: Chrome Vanadium

Sonic, spark plug socket with clip. 16mm

#954112

Stock:Yes

OEM style reproduction spark plug wrench for Honda. 16mm socket for 10mm threaded spark plugs. Repl. Honda OEM 89216-KYE-700.

Emgo spark plug wrench 16mm

#580513

Stock:Yes

145mm long. OEM style reproduction spark plug wrench for Honda. 18mm socket for 12mm threaded spark plugs. Repl. Honda OEM 89216-MRI-000.

Emgo spark plug wrench 18mm

#580514

Stock:Yes

18mm socket, for most 12mm threaded spark plugs. Used with a 3/8" square drive or 17mm wrench. Allows a fixed or up to a 15° angle swivel drive when used with the 567325 optional wobble extension bar. The wobble extension is used to gain better (angled) access to hard to reach places.

Motion Pro, Pro Plug Socket™ 18mm spark plug socket

#567326

Stock:Yes

Used on high energy electronic or points ignition systems. Comes with a tapered edge for measuring gap. Gapping is done with center hole that will allow you to gap spark plug without pressure to center electrode. Measures and gaps from 0.020" to 0.100" (0.5mm to 2.53mm).

Lisle, spark plug gapper tool

#530845

Stock:Yes