BIKE SELECTOR

20 of 639 search results

Sort on:

11/32"
Fast Eddy Co
New

Fast Eddy Co, Valve guide Drivers

#718699

Stock:Yes

3/8"
Fast Eddy Co
New

Fast Eddy Co, Valve guide Drivers

#718698

Stock:Yes

5/16"
Fast Eddy Co
New

Fast Eddy Co, Valve guide Drivers

#718700

Stock:Yes

Premium valve Guide Drivers, Set of 3. Sizes: 3/8"
Fast Eddy Co
New

Fast Eddy Co, Valve guide Drivers

#718697

Stock:Yes

Progressive rate fork springs of superior quality. Precision wound and made of high quality chrome silicon wire. Provides a smooth ride but the progressive rate gets more firm when compressed, which helps prevent bottoming out when taking big bumps but still gives a comfortable ride in normal cruising circumstances. Also helps reduce front end dive during hard braking. Each kit comes with progressive fork springs and spacers where necessary.
Progressive Suspension
New

PS, fork spring kit. 47 mm

#719716

Stock:Yes

1.438 OD x 1.059 ID
Kibblewhite

KPMI shims, spring, universal

#559458

Stock:Yes

Outside diameter 0.3967" (+0.001"). C630 bearing bronze. A tough nickel-aluminum-bronze alloy typically used in high performance and racing applications where rapid heat transfer from the valve to head is important. Similar to Ampco-45.
Kibblewhite

KPMI, exhaust valve guide. C630 bronze. +.001"

#524444

Stock:Yes

Outside diameter 0.2357" (5.98678mm) HSS. Cutting diameter tolerance +/- .0002". Overall length: 7-1/8" (181mm). Nickel finish. For use with KPMI Manganese Bronze & Cast Iron valve guides only. Note: Not for use on C630 Nickel Aluminum Bronze guides. Note: Once reamer is used on Cast Iron, it is not advisable to then use it on a bronze guide.
Kibblewhite

KPMI, valve guide reamer 6mm. Manganese & cast iron

#588729

Stock:Yes

Solid PTFE, with metal band and choker spring. Stem diameter: 5/16" (0,311"), valve guide diameter: 0,500"; over all length of seal: 0,510"; outside diameter of seal: 0,600". Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom application. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345") Installation note: Valve guides made of PTFE require another fitment technique than 'regular' or non-PTFE valve guides, this is due to the PTFE material. They are typically 0.020” (0.50mm) smaller than the valve stem and guide top they’re designed to fit. - The guide top should have a decent chamfer - The valve stem should have a decent chamfer, but a mylar seal installation protector / installation capsule (501823 green 5/16" / 0.3125", 501824 Yellow 11/32" / 0.34375", 501825 3/8" / 0.375") is advised for easier installation over the valve stem - You have to kind of roll the seal around the valve tip while exerting downward pressure to get it started - Don't push directly on the very top of the seal to get it on to the guide, you’ll collapse the sealing area and tear the seal - A 12 point 12mm socket catches the shoulder of the guide pretty well and can be used to push the seal on to the guide until it just bottoms out. The choker wire around sealing area and the band around the area that fits the guide, combined with the hardness of the material itself makes the seal a tight fit and little harder to install than regular Viton seals. PTFE material does not have 'memory' and therefore is subject to creep. This creep allows the seal to conform to mating surfaces. Because of the ‘creep’ characteristic, the seal relaxes a bit after installation, and doesn’t drag on the valve stem as hard as it does during installation. The twin-spring design provides continuous tension on the valve guide and the valve stem of the valve during it's lifetime.
Kibblewhite

KPMI, custom valve guide seals. PTFE

#524538

Stock:Yes

Solid Viton rubber, with metal jacket and choker spring. Stem diameter: 6mm, valve guide diameter: 0,435"; over all length of seal: 0,400"; outside diameter of seal: 0,560". Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom application. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345").
Kibblewhite

KPMI, custom valve guide seals. Viton

#524545

Stock:Yes

Solid PTFE, with metal band and choker spring. Stem diameter: 5/16" (0.311"). Valve guide diameter: 0.425". Over all length of seal: 0.386". Outside diameter of seal: 0,512". Kibblewhite Precision Machining custom valve stem are a quality product and suitable for any and all custom application. Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom applications. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345") Installation note: Valve guides made of PTFE require another fitment technique than 'regular' or non-PTFE valve guides, this is due to the PTFE material. They are typically 0.020” (0.50mm) smaller than the valve stem and guide top they’re designed to fit. - The guide top should have a decent chamfer - The valve stem should have a decent chamfer, but a mylar seal installation protector / installation capsule (501823 green 5/16" / 0.3125", 501824 Yellow 11/32" / 0.34375", 501825 3/8" / 0.375") is advised for easier installation over the valve stem - You have to kind of roll the seal around the valve tip while exerting downward pressure to get it started - Don't push directly on the very top of the seal to get it on to the guide, you’ll collapse the sealing area and tear the seal - A 12 point 12mm socket catches the shoulder of the guide pretty well and can be used to push the seal on to the guide until it just bottoms out. The choker wire around sealing area and the band around the area that fits the guide, combined with the hardness of the material itself makes the seal a tight fit and little harder to install than regular Viton seals. PTFE material does not have 'memory' and therefore is subject to creep. This creep allows the seal to conform to mating surfaces. Because of the ‘creep’ characteristic, the seal relaxes a bit after installation, and doesn’t drag on the valve stem as hard as it does during installation. The twin-spring design provides continuous tension on the valve guide and the valve stem of the valve during it's lifetime.
Kibblewhite

KPMI, custom valve guide seals. PTFE

#524537

Stock:Yes

Includes titanium top collars, steel lower, reverse wound multiple parts inner & outer performance spring set, early style oiil seals and a oil seal installer tool. Manley recommends the use of the included earlier style Viton oil seals and not the oil seal-lower collar set-up as used by The Factory. Pressure: 180lbs@1.800", 400lbs@1.150". Coil bind 1.085".
Manley

Manley, valve spring kit. Titanium. Std to .650" lift

#501284

Stock:Yes

With 24 seals. Comes with with built-in spring-loaded Viton wipers. Valve stem seals can be used, and are recommended, on all applications. They will help control oil consumption in any type H-D engine. Note: Valve seal installation tools are not included and must be purchased separately when required.
Manley

Manley, valve guide seal set. Viton (24)

#513982

Stock:No

With 24 seals. Comes with with built-in spring-loaded Viton wipers. Valve stem seals can be used, and are recommended, on all applications. They will help control oil consumption in any type H-D engine. Note: Valve seal installation tools are not included and must be purchased separately when required.
Manley

Manley, valve guide seal set. Viton (24)

#513976

Stock:Yes

With 24 seals. Comes with with built-in spring-loaded Viton wipers. Valve stem seals can be used, and are recommended, on all applications. They will help control oil consumption in any type H-D engine. OEM replacement reference 18000-81. Note: Valve seal installation tools are not included and must be purchased separately when required.
Manley

Manley, valve guide seal set. Viton (24)

#513980

Stock:Yes

Solid PTFE, with metal band and choker spring. Stem diameter: 11/32" (0,343"), valve guide diameter: 0,500"; over all length of seal: 0,510"; outside diameter of seal: 0,596". Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom application. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345") Installation note: Valve guides made of PTFE require another fitment technique than 'regular' or non-PTFE valve guides, this is due to the PTFE material. They are typically 0.020” (0.50mm) smaller than the valve stem and guide top they’re designed to fit. - The guide top should have a decent chamfer - The valve stem should have a decent chamfer, but a mylar seal installation protector / installation capsule (501823 green 5/16" / 0.3125", 501824 Yellow 11/32" / 0.34375", 501825 3/8" / 0.375") is advised for easier installation over the valve stem - You have to kind of roll the seal around the valve tip while exerting downward pressure to get it started - Don't push directly on the very top of the seal to get it on to the guide, you’ll collapse the sealing area and tear the seal - A 12 point 12mm socket catches the shoulder of the guide pretty well and can be used to push the seal on to the guide until it just bottoms out. The choker wire around sealing area and the band around the area that fits the guide, combined with the hardness of the material itself makes the seal a tight fit and little harder to install than regular Viton seals. PTFE material does not have 'memory' and therefore is subject to creep. This creep allows the seal to conform to mating surfaces. Because of the ‘creep’ characteristic, the seal relaxes a bit after installation, and doesn’t drag on the valve stem as hard as it does during installation. The twin-spring design provides continuous tension on the valve guide and the valve stem of the valve during it's lifetime.
Kibblewhite

KPMI, custom valve guide seals. PTFE

#524540

Stock:Yes

Solid Viton rubber, with metal jacket and choker spring. Stem diameter: 5/16" (0,311"), valve guide diameter: 0,420"; over all length of seal: 0,412"; outside diameter of seal: 0,566". Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom application. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345")
Kibblewhite

KPMI, custom valve guide seals. Viton

#524548

Stock:Yes

Solid Viton rubber, with choker and tension spring. Stem diameter: 7mm, valve guide diameter: 0,475"; over all length of seal: 0,374"; outside diameter of seal: 0,560". Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom application. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345")
Kibblewhite

KPMI, custom valve guide seals

#524550

Stock:Yes

Solid Viton. Stem diameter: 5/16" (0.311"). Valve guide diameter: 0.500". Over all length of seal: 0.465". Outside diameter of seal: 0,550". Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom applications. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345")
Kibblewhite

KPMI custom valve guide seals

#524551

Stock:Yes

Solid Viton rubber, with metal jacket and choker spring. Stem diameter: 7mm, valve guide diameter: 0,435"; over all length of seal: 0,517"; outside diameter of seal: 0,550". Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom application. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345")
Kibblewhite

KPMI, custom valve guide seals. Viton

#524547

Stock:Yes