BIKE SELECTOR

20 of 899 search results

Sort on:

Fits 250cc two stroke models
Athena

Athena, cylinder head gasket H-D / Cagiva

#979877

Stock:Yes

Fits 175cc two stroke models
Athena

Athena, cylinder head gasket H-D / Cagiva

#979876

Stock:Yes

.125" fiber material. Replacement for the OEM cork 17541-48A/B/C, 175-48 gasket.
Cometic

Cometic, rocker cover gasket. Fiber, thick

#561727

Stock:Yes

.040" thick MLS (Multi Layer Steel). Consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin o-rings.
Cometic

Cometic, cylinder head gasket set. 4-1/8" .040" MLS

#561487

Stock:Yes

.027" thick MLS (Multi Layer Steel). Consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin o-rings.
Cometic

Cometic, cylinder head gasket set. 4-1/8" .027" MLS

#561484

Stock:Yes

.010" thick (extra thin). Standard thickness is .020". SLS (Single-Layer-Steel) spring steel gaskets have .001" of high temperature viton rubber coating on both sides. They will not weep, extrude, tear or become brittle over time.
Cometic

Cometic, right rocker cover gasket. SLS .010"

#561248

Stock:Yes

MLS (Multi Layer Steel). Front & rear gasket for one engine. 4.00" fits 110" OEM H-D Twin Cooled engines only. Will not fit 110" non-Twin Cooled models. Stock Twin Cam gasket is approx. .040" thick. OEM replacement reference 16500168. MLS (Multi Layer Steel) explained: MLS consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin o-rings, when in use.
Cometic

Cometic, cylinder head gaskets 4" bore .045" MLS

#561229

Stock:No

.030" thick MLS (Multi Layer Steel). Consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin o-rings.
Cometic

Cometic, cylinder head gasket set. 4-1/8" .030" MLS

#561228

Stock:Yes

.025" thick MLS (Multi Layer Steel). Consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin o-rings.
Cometic

Cometic, cylinder head gasket set. 4.00" .025" MLS

#561480

Stock:Yes

Copper. 3-7/16" standard bore. Set includes 2 head gaskets. OEM replacement reference 16770-36 (old H-D 12-36). Note: Special Order Product only. To order please contact your MCS sales representative.
S&S

S&S, cylinder head gasket set. 3-7/16" bore copper

#518287

Stock:No

.030" thick MLS (Multi Layer Steel). Consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin o-rings.
Cometic

Cometic, cylinder head gasket set. 4-1/8" .030" MLS

#561485

Stock:Yes

Front & rear gasket to service one engine. OEM replacement reference 17625-01K (front) & 17626-01 (rear). MLS (Multi Layer Steel). Consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are riveted together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resistant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin O-rings.
Cometic

Cometic, cylinder head gasket set. .030" MLS

#561501

Stock:Yes

.010" thick (extra thin). Standard thickness is .020". OEM replacement reference 16779-84D. SLS (Single-Layer-Steel) spring steel gaskets have .001" of high temperature Viton rubber coating on both sides. They will not weep, extrude, tear or become brittle over time.
Cometic

Cometic, left rocker cover gasket. SLS .010"

#561249

Stock:Yes

Front & rear gasket to service one engine. OEM replacement reference 17625-01K (front) & 17626-01 (rear). MLS (Multi Layer Steel). Consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are riveted together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resistant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin O-rings.
Cometic

Cometic, cylinder head gasket set. .025" MLS

#561500

Stock:Yes

.025" MLS (Multi Layer Steel). MLS consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin o-rings.
Cometic

Cometic, cylinder head gasket set. 4-1/4" .025" MLS

#561502

Stock:Yes

.036" thick MLS (Multi Layer Steel). Consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin o-rings.
Cometic

Cometic, cylinder head gasket set. 4-1/8" .036" MLS

#561508

Stock:Yes

MLS (Multi Layer Steel). Front & rear gasket for one engine. 3-7/8" (3.875") fits 88" to 95"(1550cc) big bore conversions and is standard size for 103" OEM H-D engines. Will not fit 103" Twin Cooled models. Stock Twin Cam gasket is approx. .043" thick. MLS (Multi Layer Steel) explained: MLS consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin o-rings, when in use.
Cometic

Cometic, cylinder head gaskets 3-7/8" bore .060" MLS

#561146

Stock:Yes

.030" MLS (Multi Layer Steel). MLS consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin o-rings.
Cometic

Cometic, cylinder head gasket set. 4-1/4" .030" MLS

#561503

Stock:Yes

MLS (Multi Layer Steel). Front & rear gasket for one engine. 4.00" fits 110" OEM H-D Twin Cooled engines only. Will not fit 110" non-Twin Cooled models. Stock Twin Cam gasket is approx. .040" thick. OEM replacement reference 16500168. MLS (Multi Layer Steel) explained: MLS consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin o-rings, when in use.
Cometic

Cometic, cylinder head gaskets 4" bore .040" MLS

#561149

Stock:No

.045" thick MLS (Multi Layer Steel). Consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of dowel pin o-rings.
Cometic

Cometic, cylinder head gasket set. 4-1/8" .045" MLS

#561510

Stock:Yes