Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 447 search results

Sort on:

Sort on:

Raw machined aluminum finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Straight Risers. 10" rise. Raw

#708344

Stock:Yes

Raw machined aluminum finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Straight Risers. 8" rise. Raw

#708356

Stock:Yes

Black anodized finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 5" rise. Black

#708347

Stock:Yes

Raw machined uncoated finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 5" rise. Raw

#708348

Stock:Yes

Black anodized finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Straight Risers. 8" rise. Black

#708355

Stock:Yes

Black anodized finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Straight Risers. 10" rise. Black

#708343

Stock:Yes

Raw machined uncoated finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 8" rise. Raw

#708350

Stock:Yes

Raw machined aluminum uncoated finish.
Fits models with 1-1/8" (28mm) handlebar clamping area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
The 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 5" rise. Raw

#708317

Stock:Yes

Raw machined aluminum uncoated finish.
Fits models with 1-1/8" (28mm) handlebar clamping area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
The 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 10" rise. Raw

#708319

Stock:Yes

Raw machined aluminum uncoated finish.
Fits models with 1-1/8" (28mm) handlebar clamping area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
The 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 12" rise. Raw

#708320

Stock:Yes

Black anodized finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 12" rise. Black

#708353

Stock:Yes

Raw machined uncoated finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 10" rise. Raw

#708352

Stock:Yes

Raw machined aluminum finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Straight Risers. 12" rise. Raw

#708346

Stock:Yes

Raw machined uncoated finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 12" rise. Raw

#708354

Stock:Yes

Black anodized finish.
Fits models with 1-1/8" (28mm) handlebar clamping area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
The 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 5" rise. Black

#708316

Stock:Yes

Raw machined aluminum uncoated finish.
Fits models with 1-1/8" (28mm) handlebar clamping area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
The 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 8" rise. Raw

#708318

Stock:Yes

Black anodized finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Straight Risers. 12" rise. Black

#708345

Stock:Yes

With 11.5" risers & 3" rise handlebar for 14.5" overall tall.
With Gold Ops risers for external wiring. This Performance Machine handlebar kit comes with an 1-1/4" 7050-T6 aluminum textured black handlebar with 3" rise, and slots for internal wiring. Bar is tapered down to 1" diameter for the controls. Compatible with both mechanical and electronic throttle. Risers are 1-1/4" I.D. with 11.5" rise and are manufactured from 6061-T6 CNC machined billet aluminum.
- Dimensions: 14.5" tall overall, 32" wide, 3" pullback, 3" rise
- Cable throttle and electronic throttle compatible
- External wiring
- Bar diameter: 1.25" tapers to 1"
- CNC machined from billet aluminum.
Note: This late model Phatbar & Riser Kit offers stock H-D digital gauge relocation compatibility right out of the box. When installing the stock H-D digital gauge you must separately order the gauge relocation kit, available as 999870 (rectangular style gauge) or 999871 (4" round style gauge). For 4" round gauge models with warning lights a warning light relocation kit is available as 999872.

PM, 1-1/4" Phatbar & 14.5" riser kit. Gold Ops

#706960

Stock:Yes

Black anodized finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 10" rise. Black

#708351

Stock:No

Black anodized finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 8" rise. Black

#708349

Stock:No