BIKE SELECTOR

20 of 100 search results

Sort on:

11/32"
Fast Eddy Co
New

Fast Eddy Co, Valve guide Drivers

#718699

Stock:Yes

3/8"
Fast Eddy Co
New

Fast Eddy Co, Valve guide Drivers

#718698

Stock:Yes

5/16"
Fast Eddy Co
New

Fast Eddy Co, Valve guide Drivers

#718700

Stock:Yes

Premium valve Guide Drivers, Set of 3. Sizes: 3/8"
Fast Eddy Co
New

Fast Eddy Co, Valve guide Drivers

#718697

Stock:Yes

Solid PTFE, with metal band and choker spring. Stem diameter: 5/16" (0,311"), valve guide diameter: 0,500"; over all length of seal: 0,510"; outside diameter of seal: 0,600". Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom application. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345") Installation note: Valve guides made of PTFE require another fitment technique than 'regular' or non-PTFE valve guides, this is due to the PTFE material. They are typically 0.020” (0.50mm) smaller than the valve stem and guide top they’re designed to fit. - The guide top should have a decent chamfer - The valve stem should have a decent chamfer, but a mylar seal installation protector / installation capsule (501823 green 5/16" / 0.3125", 501824 Yellow 11/32" / 0.34375", 501825 3/8" / 0.375") is advised for easier installation over the valve stem - You have to kind of roll the seal around the valve tip while exerting downward pressure to get it started - Don't push directly on the very top of the seal to get it on to the guide, you’ll collapse the sealing area and tear the seal - A 12 point 12mm socket catches the shoulder of the guide pretty well and can be used to push the seal on to the guide until it just bottoms out. The choker wire around sealing area and the band around the area that fits the guide, combined with the hardness of the material itself makes the seal a tight fit and little harder to install than regular Viton seals. PTFE material does not have 'memory' and therefore is subject to creep. This creep allows the seal to conform to mating surfaces. Because of the ‘creep’ characteristic, the seal relaxes a bit after installation, and doesn’t drag on the valve stem as hard as it does during installation. The twin-spring design provides continuous tension on the valve guide and the valve stem of the valve during it's lifetime.
Kibblewhite

KPMI, custom valve guide seals. PTFE

#524538

Stock:Yes

Solid Viton rubber, with metal jacket and choker spring. Stem diameter: 6mm, valve guide diameter: 0,435"; over all length of seal: 0,400"; outside diameter of seal: 0,560". Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom application. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345").
Kibblewhite

KPMI, custom valve guide seals. Viton

#524545

Stock:Yes

Solid PTFE, with metal band and choker spring. Stem diameter: 5/16" (0.311"). Valve guide diameter: 0.425". Over all length of seal: 0.386". Outside diameter of seal: 0,512". Kibblewhite Precision Machining custom valve stem are a quality product and suitable for any and all custom application. Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom applications. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345") Installation note: Valve guides made of PTFE require another fitment technique than 'regular' or non-PTFE valve guides, this is due to the PTFE material. They are typically 0.020” (0.50mm) smaller than the valve stem and guide top they’re designed to fit. - The guide top should have a decent chamfer - The valve stem should have a decent chamfer, but a mylar seal installation protector / installation capsule (501823 green 5/16" / 0.3125", 501824 Yellow 11/32" / 0.34375", 501825 3/8" / 0.375") is advised for easier installation over the valve stem - You have to kind of roll the seal around the valve tip while exerting downward pressure to get it started - Don't push directly on the very top of the seal to get it on to the guide, you’ll collapse the sealing area and tear the seal - A 12 point 12mm socket catches the shoulder of the guide pretty well and can be used to push the seal on to the guide until it just bottoms out. The choker wire around sealing area and the band around the area that fits the guide, combined with the hardness of the material itself makes the seal a tight fit and little harder to install than regular Viton seals. PTFE material does not have 'memory' and therefore is subject to creep. This creep allows the seal to conform to mating surfaces. Because of the ‘creep’ characteristic, the seal relaxes a bit after installation, and doesn’t drag on the valve stem as hard as it does during installation. The twin-spring design provides continuous tension on the valve guide and the valve stem of the valve during it's lifetime.
Kibblewhite

KPMI, custom valve guide seals. PTFE

#524537

Stock:Yes

With 24 seals. Comes with with built-in spring-loaded Viton wipers. Valve stem seals can be used, and are recommended, on all applications. They will help control oil consumption in any type H-D engine. Note: Valve seal installation tools are not included and must be purchased separately when required.
Manley

Manley, valve guide seal set. Viton (24)

#513982

Stock:No

With 24 seals. Comes with with built-in spring-loaded Viton wipers. Valve stem seals can be used, and are recommended, on all applications. They will help control oil consumption in any type H-D engine. Note: Valve seal installation tools are not included and must be purchased separately when required.
Manley

Manley, valve guide seal set. Viton (24)

#513976

Stock:Yes

With 24 seals. Comes with with built-in spring-loaded Viton wipers. Valve stem seals can be used, and are recommended, on all applications. They will help control oil consumption in any type H-D engine. OEM replacement reference 18000-81. Note: Valve seal installation tools are not included and must be purchased separately when required.
Manley

Manley, valve guide seal set. Viton (24)

#513980

Stock:Yes

Solid PTFE, with metal band and choker spring. Stem diameter: 11/32" (0,343"), valve guide diameter: 0,500"; over all length of seal: 0,510"; outside diameter of seal: 0,596". Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom application. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345") Installation note: Valve guides made of PTFE require another fitment technique than 'regular' or non-PTFE valve guides, this is due to the PTFE material. They are typically 0.020” (0.50mm) smaller than the valve stem and guide top they’re designed to fit. - The guide top should have a decent chamfer - The valve stem should have a decent chamfer, but a mylar seal installation protector / installation capsule (501823 green 5/16" / 0.3125", 501824 Yellow 11/32" / 0.34375", 501825 3/8" / 0.375") is advised for easier installation over the valve stem - You have to kind of roll the seal around the valve tip while exerting downward pressure to get it started - Don't push directly on the very top of the seal to get it on to the guide, you’ll collapse the sealing area and tear the seal - A 12 point 12mm socket catches the shoulder of the guide pretty well and can be used to push the seal on to the guide until it just bottoms out. The choker wire around sealing area and the band around the area that fits the guide, combined with the hardness of the material itself makes the seal a tight fit and little harder to install than regular Viton seals. PTFE material does not have 'memory' and therefore is subject to creep. This creep allows the seal to conform to mating surfaces. Because of the ‘creep’ characteristic, the seal relaxes a bit after installation, and doesn’t drag on the valve stem as hard as it does during installation. The twin-spring design provides continuous tension on the valve guide and the valve stem of the valve during it's lifetime.
Kibblewhite

KPMI, custom valve guide seals. PTFE

#524540

Stock:Yes

Solid Viton rubber, with metal jacket and choker spring. Stem diameter: 5/16" (0,311"), valve guide diameter: 0,420"; over all length of seal: 0,412"; outside diameter of seal: 0,566". Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom application. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345")
Kibblewhite

KPMI, custom valve guide seals. Viton

#524548

Stock:Yes

Solid Viton rubber, with choker and tension spring. Stem diameter: 7mm, valve guide diameter: 0,475"; over all length of seal: 0,374"; outside diameter of seal: 0,560". Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom application. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345")
Kibblewhite

KPMI, custom valve guide seals

#524550

Stock:Yes

Solid Viton. Stem diameter: 5/16" (0.311"). Valve guide diameter: 0.500". Over all length of seal: 0.465". Outside diameter of seal: 0,550". Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom applications. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345")
Kibblewhite

KPMI custom valve guide seals

#524551

Stock:Yes

Solid Viton rubber, with metal jacket and choker spring. Stem diameter: 7mm, valve guide diameter: 0,435"; over all length of seal: 0,517"; outside diameter of seal: 0,550". Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom application. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345")
Kibblewhite

KPMI, custom valve guide seals. Viton

#524547

Stock:Yes

Solid Viton rubber, with metal jacket and choker spring. Stem diameter: 6mm, valve guide diameter: 0,385"; over all length of seal: 0,371"; outside diameter of seal: 0,480". Kibblewhite Precision Machining custom valve stem seals are a quality product and suitable for any and all custom application. Note: Below mentioned valve stem diameters are for reference only. - 36-84 B.T. = 3/8" (.3750") - 57-83 XL intake = 0.3090" - 57-83 XL exhaust = 0.3384" - 84-04 B.T.; 86-03 XL = 5/16" (.311") - 05-16 TCA/B; 04-22 XL; 08-12 XR = 7mm (.2760") - 02-17 V-Rod = 6mm (0.2345") - 17-24 M8 = 6mm (0.2345")
Kibblewhite

KPMI, custom valve guide seals. Viton

#524546

Stock:Yes

Cast iron offers maximum durability and wear resistance for long distance touring. The standard since the invention of the piston engine. Note: Standard non-oversize dimensions (for reference only) are 0.5650" O.D. (14.35mm); 0.3085" I.D. (7.84mm); 1.77" OAL (44.96mm).
Kibblewhite

KPMI, exhaust valve guide. Cast iron. +.001"

#524250

Stock:Yes

With 4 seals. Comes with with built-in spring-loaded Viton wipers. Valve stem seals can be used, and are recommended, on all applications. They will help control oil consumption in any type H-D engine. OEM replacement reference 18000-81. Note: Valve seal installation tools are not included and must be purchased separately when required.
Manley

Manley, valve guide seal set. Viton 4-pk

#513979

Stock:No

For OEM 6mm diameter valve stems. With Viton heat resistant rubber seals with built-in spring-loaded wiper.
Feuling

Feuling, Viton valve seal kit. 6mm

#588020

Stock:Yes

High quality Viton valve seals designed to handle high engine temperatures with a built in spring loaded wiper to clean excess oil from valve stem with minimal friction. Includes 8 seals. OEM replacement reference 18687-01K.
Feuling

Feuling, V-Rod Viton valve seals set

#707753

Stock:Yes