Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 52 search results

Sort on:

Sort on:

Chrome plated accents to dress-up the fairing inside.

Kuryakyn, Speaker grill accents. Zombie

#541492

Stock:Yes

Chrome plated accents to dress-up the rear section of your bike.

Kuryakyn, Speaker accents. rear. Chrome

#541667

Stock:Yes

Chrome plated accents to dress-up the fairing inside.

Kuryakyn, Speaker grill accents. Flame

#541493

Stock:Yes

This speaker upgrade kit consist of two 5.25" speakers and speaker grills for Roadglide, Streetglide and Tourpacks.

Highlights:

Manufactured with industrial grade materials optimized for harsh environments

Glass fiber reinforced ABS frame for impact absorption and thermal stability

Impermeable polypropylene cone is mechanically rugged and heat resistant

Co-molded low-density santoprene surround chemically bonded cone

Titanium dome tweeter resists corrosion with high strength-to-density ratio

Low Mass Neodymium earth element magnets for maximum output

1.25" oxygen free copper voice coil on thermally absorbent aluminum former

1" titanium wide dispersion high output hemispherical dome tweeter

2-Ohm for stock replacement

Integrated 6dB high-pass crossover protects tweeter from harmful frequencies

92dB (1w/1m) SPL efficiency / 60-22kHz frequency response

75w RMS power rating / mounting depth: 2.00"

PrecisionPower, 5.25" Fairing Speaker Upgrade Kit 2 Ohm

#999371

Stock:No

These tweeters can be mounted in the OEM batwing fairing gauge hole and are plug-n-play with the OE wire harness.

Highlights:

Titanium ring radiator tweeter increases efficiency & high-frequency transients

Diecast aluminum chassis molded for installation in original fairing gauge hole

Accommodates OEM & aftermarket gauge trim rings

Low mass neodymium rare earth element magnets for maximum output

Integrated horn & phase plug improve high-frequency dispersion patterns

Plug-n-Play t-harness included for quick integration to OEM speaker wire

Integrated 12dB 4kHz high-pass crossover & overload protection circuit breaker

50w RMS,100w MAX, 105dB SPL, 4kHz-22kHz Frequency response

Note: replacement tweeter diaphragm available as 999373

PrecisionPower, Pro audio fairing tweeters

#999372

Stock:Yes

MAS speakers are created explicitly for Touring motorcycles. These strong, weather-resistant coaxial speakers fit right into the factory fairing and Tour Pak locations and pack plenty of impact in their compact frame.

Highlights:

Manufactured with industrial grade materials optimized for harsh environments

Glass fiber reinforced ABS frame for impact absorption and thermal stability

Impermeable polypropylene cone is mechanically rugged and heat resistant

Co-molded low-density santoprene surround chemically bonded cone

Titanium dome tweeter resists corrosion with high strength-to-density ratio

Low Mass Neodymium earth element magnets for maximum output

1.25" oxygen free copper voice coil on thermally absorbent aluminum former

1" titanium wide dispersion high output hemispherical dome tweeter

4-Ohm custom applications

Integrated 6dB high-pass crossover protects tweeter from harmful frequencies

92dB (1w/1m) SPL efficiency / 60-22kHz frequency response

75w RMS power rating / mounting depth: 2.50"

PrecisionPower, 5.25" MAS fairing speakers 4 Ohm

#999381

Stock:Yes

Are you looking to add bass to your Harley-Davidson without all the headaches of matching up an amplifier or, even worse, taking away the saddlebag structure’s integrity? Precision Power has created the SBW powered saddlebag drop-in subwoofer, a perfect marriage of the custom enclosure, subwoofer, and built-in digital amplifier that allows you to avoid complicated mathematics. You’ll love the powerful impact this enclosure adds to your favorite tracks, and you’ll rest easy knowing that you’re getting state-of-the-art performance from Precision Power.

The SBW saddlebag speaker comes equipped with a custom subwoofer paired with a passive radiator to increase bass response with a built-in 300-watt digital amplifier. Neodymium Magnet Motor enhances the subwoofer’s motors’ strength; it is also extremely light, which means more output and less weight. The sealed enclosure provides optimum sound quality, and the rugged rotational molded ABS plastic protects them wherever you ride or travel. High- and low-level adjustment switches allow you to connect it to any configuration, the system plug-n-plays behind either OE Harley-Davidson radios or even aftermarket Apple CarPlay & Android Auto replacement radio.

With all this new bass comes new technology… Well Sorta… The Product Development team came up with a solution to port bass coming from your saddles without destroying the structure of each saddlebag. Each subwoofer kit comes with ported grommets equipped with a unique membrane allowing sound to pass through while keeping the elements out. It’s specific technology all of you know and have experienced in sports earbuds; it’s the special membrane that’s the genius behind this product; you’re welcome.

Highlights:

Down-Firing subwoofer enclosure made of industrial grade ABS

Class-D subwoofer amplifier with fault protection built-in

Enclosure made of industrial grade ABS (Rotomolded)

Waterproof quick-disconnect plugs for easy install/removal in the saddlebag

Custom active subwoofer with low-frequency added passive radiator

Waterproof hydrophonic grommet membrane included

Plug-n-Play harnesses included for stock or aftermarket radio

Note: see 999387 for left side SBW saddlebag subwoofer

PrecisionPower, SBW saddlebag subwoofer right side

#999388

Stock:Yes

Chrome plated, trick looking & easy to install.

Kuryakyn, Speaker grill. Corona

#917184

Stock:No

Chrome plated, trick looking & easy to install.

Kuryakyn, Speaker grill. Zombie

#917183

Stock:Yes

Precision Power’s direct fitment solution for lower-fairing speakers works excellent on your Touring bikes! Add speaker pods for that additional audio punch, make your motorcycle a concert hall! Housing construction uses high-grade industrial ABS plastic, sure to last the rough impairments on the highway. Each kit is painted only in Vivid Black. Sold with speakers for left and right lowers and includes waterproof quick disconnect plugs for installer-friendly design. Pre-wired for MAA.400 Audio Amplifier (MCS 999394).

Highlights:

Vented lower fairing in gloss black made of industrial grade ABS

Midrange notch filter included for OE pod installation

Waterproof quick-disconnect plugs for easy install & removal

Pre-wired with MAS.654 Premium 6.5” speakers

Plug-N-Play wire harness connects to MAA4.400 Amplifier (MCS 999394)

Wire harness can accommodate installation to alternate amplifier

PrecisionPower, Vented fairing lowers with speakers

#999392

Stock:Yes

This speaker upgrade kit consist of two 6.5" speakers, two midrange tuning modules and speaker grills for Roadglide, Streetglide and Tourpacks.

Highlights:

Manufactured with industrial grade materials optimized for harsh environments

Glass fiber reinforced ABS frame for impact absorption and thermal stability

Impermeable polypropylene cone is mechanically rugged and heat resistant

Midrange Notch Filter included for OE pod installation

Co-molded low-density santoprene surround chemically bonded cone

Titanium dome tweeter resists corrosion with high strength-to-density ratio

Low Mass Neodymium earth element magnets for maximum output

1.25" oxygen free copper voice coil on thermally absorbent aluminum former

1" titanium wide dispersion high output hemispherical dome tweeter

4-Ohm for custom applications

Integrated 6dB high-pass crossover protects tweeter from harmful frequencies

92dB (1w/1m) SPL efficiency / 60-22kHz frequency response

75w RMS power rating / mounting depth: 2.00"

PrecisionPower, 6.5" Fairing speaker upgrade kit 4 Ohm

#999370

Stock:Yes

For 999374 Tweeter

PrecisionPower, Replacement tweeter diaphragm

#999375

Stock:Yes

For 999372 Tweeter

PrecisionPower, Replacement tweeter diaphragm

#999373

Stock:Yes

Replacement grills for kit 999385

PrecisionPower, Replacement grills for saddlebag speaker kit

#999386

Stock:Yes

MAS speakers are created explicitly for Touring motorcycles. These strong, weather-resistant coaxial speakers fit right into the factory fairing and Tour Pak locations and pack plenty of impact in their compact frame.

Highlights:

MAS.802HT: 200w RMS, 400w MAX, 95dB SPL, 80-22kHz Frequency Response

Manufactured with industrial grade materials optimized for harsh environments

Glass fiber reinforced ABS frame for impact absorption and thermal stability

Low Mass Neodymium earth element magnets for maximum output

Polypropylene coated paper cone for extreme performance & water resistance

Titanium ring radiator tweeter increases efficiency & high-frequency transients

Integrated horn & phase plug improve high-frequency dispersion patterns

1.75” Oxygen free copper voice coil on thermally absorbent aluminum former

Bi-Amp Input Terminals for Tweeter, Jumper Included for Standard Operation

Powder coated black metal grills included

Integrated 12dB high-pass crossover protects tweeter from harmful frequencies

Mounting depth: 4"

PrecisionPower, 8" High efficiency Horn Loaded Speaker 2-Ohm

#999402

Stock:Yes

Replacement subwoofer for kits 999387,999388,999389,999390

PrecisionPower, Replacement Subwoofer

#999391

Stock:No

Replacement grills for kit 999383

PrecisionPower, Replacement grills for saddlebag speaker kit

#999384

Stock:No

The 6" x 9" MAS size speakers are unique, with an inverted magnet construction, and the coaxially mounted tweeter housing helps with heat dissipation (Magnet relocated to the front of the speaker). Patent Pending design helps with thermal management for motorcycle applications to extract heat from the speaker through the front tweeter pod away from the saddlebag with ambient air. Diecast Aluminum tweeter housing draws thermal build-up away from the internal hidden neodymium speaker magnets. Traditional neodymium magnet speakers trap heat inside the saddlebag and that’s not what we wanted. You can say goodbye to damaging jackets or even worse speaker failure.

Highlights:

Manufactured with industrial grade materials optimized for harsh environments

Glass fiber reinforced ABS frame for impact absorption and thermal stability

Impermeable polypropylene cone is mechanically rugged and heat resistant

Midrange Notch Filter included for OE pod installation

Co-molded low-density santoprene surround chemically bonded cone

Titanium dome tweeter resists corrosion with high strength-to-density ratio

Low Mass Neodymium earth element magnets for maximum output

1.25" oxygen free copper voice coil on thermally absorbent aluminum former

1" titanium wide dispersion high output hemispherical dome tweeter

2-Ohm for stock replacement

Integrated 6dB high-pass crossover protects tweeter from harmful frequencies

92dB (1w/1m) SPL efficiency / 60-22kHz frequency response

100w RMS power rating / mounting depth: 2.25"

Note: order installation kit separately. For 14-24 Touring order 999383. For 98-13 Touring order 999385

PrecisionPower, 6" x 9" MAS speakers 2 Ohm

#999376

Stock:Yes

6″ x 9″ Saddlebag lid speaker installation kit lets you add almost any speakers to your factory bag lids. Designed for 14up HD models with hard-shell bags. The kit is intended and meant to fit ideally with MAS.69 speakers (MCS 999376/999377/999401).
The installer-friendly cutting guide and mounting arrangement means you can enjoy the more powerful sound without replacing the saddlebags or dealing with painting. Kit includes all hardware and integrated grilles. Not compatible with models with electric locks.

Highlights:
- Adapters to install 6” x 9” speaker to stock saddlebag lid
- Saddlebag lid cutout template for exact fitment included
- Gloss black speaker grills with premium fit-n-finish included
- Plug-N-Play wire harness connects to MAA4.400 amplifier
- Waterproof quick-disconnect plugs for easy install & removal in saddlebag
- Optimized for MAS.69 6”x9” Speakers (MCS 999376/999377)

PrecisionPower, saddlebag speaker installation kit

#999385

Stock:Yes

Are you looking to add bass to your Harley-Davidson without all the headaches of matching up an amplifier or, even worse, taking away the saddlebag structure’s integrity? Precision Power has created the SBW powered saddlebag drop-in subwoofer, a perfect marriage of the custom enclosure, subwoofer, and built-in digital amplifier that allows you to avoid complicated mathematics. You’ll love the powerful impact this enclosure adds to your favorite tracks, and you’ll rest easy knowing that you’re getting state-of-the-art performance from Precision Power.

The SBW saddlebag speaker comes equipped with a custom subwoofer paired with a passive radiator to increase bass response with a built-in 300-watt digital amplifier. Neodymium Magnet Motor enhances the subwoofer’s motors’ strength; it is also extremely light, which means more output and less weight. The sealed enclosure provides optimum sound quality, and the rugged rotational molded ABS plastic protects them wherever you ride or travel. High- and low-level adjustment switches allow you to connect it to any configuration, the system plug-n-plays behind either OE Harley-Davidson radios or even aftermarket Apple CarPlay & Android Auto replacement radio.

With all this new bass comes new technology… Well Sorta… The Product Development team came up with a solution to port bass coming from your saddles without destroying the structure of each saddlebag. Each subwoofer kit comes with ported grommets equipped with a unique membrane allowing sound to pass through while keeping the elements out. It’s specific technology all of you know and have experienced in sports earbuds; it’s the special membrane that’s the genius behind this product; you’re welcome.

Highlights:

Down-Firing subwoofer enclosure made of industrial grade ABS

Class-D subwoofer amplifier with fault protection built-in

Enclosure made of industrial grade ABS (Rotomolded)

Waterproof quick-disconnect plugs for easy install/removal in the saddlebag

Custom active subwoofer with low-frequency added passive radiator

Waterproof hydrophonic grommet membrane included

Plug-n-Play harnesses included for stock or aftermarket radio

Note: see 999389 for left side SBW saddlebag subwoofer

PrecisionPower, SBW saddlebag subwoofer right side

#999390

Stock:Yes