Indian catalog

1128 INDIAN Model Year Part Polycarbonate Tint Height Width Chieftain Classic 19-20 948482 Quantum® Dark grey. 95% tint 11.25” (28.6cm)3 23.25” (59.0cm) Chieftain Classic 19-20 948484 Quantum® Light grey. 26% tint 14.25” (36.2cm)3 25.25” (64.1cm) Chieftain Classic 19-20 948486 Quantum® Light grey. 26% tint 17.25” (43.8cm)3 27.25” (69.2cm) Chieftain (all) 14-22 948482(66) Quantum® Dark grey. 95% tint 11.25” (28.6cm)3 23.25” (59.0cm) Chieftain (all) 14-22 948484(66) Quantum® Light grey. 26% tint 14.25” (36.2cm)3 25.25” (64.1cm) Chieftain (all) 14-22 948486(66) Quantum® Light grey. 26% tint 17.25” (43.8cm)3 27.25” (69.2cm) Roadmaster(all) 15-22 948482(66) Quantum® Dark grey. 95% tint 11.25” (28.6cm)3 23.25” (59.0cm) Roadmaster(all) 15-22 948484(66) Quantum® Light grey. 26% tint 14.25” (36.2cm)3 25.25” (64.1cm) Roadmaster(all) 15-22 948486(66) Quantum® Light grey. 26% tint 17.25” (43.8cm)3 27.25” (69.2cm) (66) Will not fit with Indian Mid-Rise or similar style handlebars. 1 Centerline measurement from top of screen to top of fairing edge 2 Centerline measurement from top of screen to bottom edge of screen 3 Measured from top of stock headlight shroud to top of windscreen 4 Measured from the top of the fuel tank straight up to a point horizontally level with the top of the screen 5 Measured from the top of the ignition switch housing straight up to a point horizontally level with the top of the screen All widths are measured in a straight horizontal line across the back of the screens at their widest point. The typical airflow pattern of the wake from most windscreens is called a van Karman vortex. At speeds of 80-145 kmh, the air swirls off the windscreen in an approximate 90-degree segment of rotation, hits the bottom of the rider's neck on the way up, and curves off the shoulder at approximately 45 degrees. National cycle gave the VStream® its name for the shape it takes at the upper edge. The patented "V" shape is so quiet because it pushes this vortex out and away from the side of the rider's head. The rider's helmet then resides in still air, and the passenger's environment is greatly improved as well. Reduced wind noise... less turbulence... superior strength... perfect style. The VStream® revolution is here! Most VStream® windscreens are a direct replacement for the OEM screen and reuse the same mounting screws, washers and nuts. If the mounting hardware can be improved, that hardware will be supplied with the windscreen.

1129 INDIAN NEW PRODUCTS ADDED WEEKLY AT MOTORCYCLESTOREHOUSE.COM Heavy Duty™ windshields mount to the Heavy Duty™ mount kits. These are not quick release windshields, though once the mount kit (sold separately) is installed, removing the windshield takes just a few minutes. These traditional, classic-style windshield feature an adjustable center window around the headlight cutout. Mount kits are specific to your bike model, and allow you to mount any of the Heavy Duty™ windshields. Generally, if you have wide spacing between the fork tubes, a Heavy Duty™ wide frame windshield will look best. Heavy Duty™ narrow frame windshields look best on bikes with narrow spacing between fork tubes Windshield Measurements Height is measured from headlamp cutout to top of shield. Width is measured in a straight line across the back of the shield at its widest point. Heavy Duty™ Windshields have an adjustable lower window, so the headlampcutout varies depending on individual rider adjustments. Beaded Heavy Duty™ Height Width 19.50”-21.25" (49.5-54.0cm) 22.50” (57.0cm) Models Years Mount kit BEADED™ Rounded top Chrome Lower Deflectors Holdster™ Windshield Pouch Clear Red Blue Black Scout 01-03 8080804 516523 516527 516528 516529 N/A 928944 Beaded™ rounded top Heavy Duty™ Windshield Measurements Height is measured from headlamp cutout to top of shield. Width is measured in a straight line across the back of the shield at its widest point. Heavy Duty™ Windshields have an adjustable lower window, so the headlampcutout varies depending on individual rider adjustments. Height Width Touring 19.00”-21.00" (50.8-54.6cm) 21.50” (54.6cm) Chopped 14.25”-15.75" (36.2-40.0cm) 21.50” (54.6cm) Models Years Touring Chopped Chrome Lower Deflectors Holdster™ Windshield Pouch Mount kit Windshield Mount kit Windshield Spirit 01-03 513661 508465 513661 516889 N/A 928944 Scout 01-03 8080804 508465 8080804 516889 N/A 928944 Touring Heavy Duty™ Chopped Heavy Duty™ Windshield Measurements Height is measured from headlamp cutout to top of shield. Width is measured in a straight line across the back of the shield at its widest point. Heavy Duty™ Windshields have an adjustable lower window, so the headlampcutout varies depending on individual rider adjustments. Height Width Ranger 13.00”-16.25" (34.9-41.3cm) 16.50” (42.0cm) Custom 19.00”-21.00" (48.2-53.3cm) 18.75” (48.3cm) Low Boy 14.25”-16.00" (36.2-40.6cm) 18.75” (47.6cm) Models Years RANGER™ CUSTOM™ LOW BOY Chrome Lower Deflectors Holdster™ Windshield Pouch 516887 901975 901976 Spirit 01-03 500236 500236 500236 N/A 901212 Scout 15-22 572252 572252 572252 N/A Scout 100th Anniversary 2020 572252 572252 572252 N/A Scout Sixty 16-22 572252 572252 572252 N/A Scout Bobber Sixty 20-22 572252 572252 572252 N/A Scout 01-03 8081707 8081707 8081707 N/A 901212 Ranger™ Heavy Duty™ Custom™ Heavy Duty™ Low Boy Heavy Duty™

1130 INDIAN NATIONAL CYCLE, QUICK RELEASE MOUNT KIT FOR SWITCHBLADE®, SPARTAN® & WAVE® WINDSHIELDS One mount kit... any Quick Release windshield! The SwitchBlade® quick release mounting system gives you the flexibility to mount any of four styles of SwitchBlade® windshields – or Spartan® or Wave QR® – to the Indian Scout with one mount kit. On and Off in Less Than Five Seconds... Without tools! This fork-mount hardware system secures your windshield with bulldog tenacity but looks attractive when the shield is off. Innovative stainless steel cushion wheel spools turn and flex, allowing the shield to lock into place with a reassuring “pop”. Indian: 15-22 Scout; 16-22 Scout Sixty 572248 Chrome 572249 Black 572249 572248 Windshield Measurements Height is measured from headlamp cutout to top of the shield. Width is measured in a straight line across the back of the shield at its widest point. Height Width 2-Up® 20.00” (50.8cm) 23.00” (58.4cm) Chopped™ 15.20” (38.6cm) 22.30” (56.6cm) Shorty® 13.00” (33.0cm) 18.75” (47.6cm) Deflector™ 12.00” (30.5cm) 14.00” (35.5cm) NATIONAL CYCLE, SWITCHBLADE® QUICK RELEASE WINDSHIELDS WITH QUANTUM® HARDCOATED POLYCARBONATE The largest of the four shields, the SwitchBlade® 2-Up® offers maximum protection from the wind and weather for you and your riding partner. The 2-Up® gives your Scout serious touring bike performance at a fraction of the price of the upscale machines. The SwitchBlade® Chopped™ is a cut-down version of the popular 2-Up®. The recontoured top is 4.8” shorter and the trimmed bottom profile is narrower. Get all the protection you need with the slick looks you want! The smaller screen of the SwitchBlade® Shorty® is an ideal choice for a rider who generally does not put long hours in the saddle. Short in size but long on looks and quality features, the Shorty® keeps wind blast at bay while preserving the “wind in your face” motorcycling experience. Designed for maximum attitude, the minimal profile of the SwitchBlade® Deflector™ is a stylish addition to your Scout. National Cycle’s RakeAdjust feature allows you to quickly and easily change the screen angle, transforming the SwitchBlade® Deflector™ from a boulevard cruiser to a functional bug buster – or anywhere in between. 2-Up® Clear Chopped™ Tint Shorty® Tint Deflector™ Clear Models Years Mount kit 2-Up® Chopped™ Shorty® Deflector™ Chrome Lower Deflectors Holdster™ Windshield Pouch Storage Bag Clear Tint Clear Tint Clear Tint Scout 15-22 572248 8082657 8080142 8081447 8081816 8080834 8081603 8082441 N/A 926008 926009 Scout 15-22 572249(56) 8082657 8080142 8081447 8081816 8080834 8081603 8082441 N/A 926008 926009 Scout 100th Anniversary 2020 572248 8082657 8080142 8081447 8081816 8080834 8081603 8082441 N/A 926008 926009 Scout 100th Anniversary 2020 572249(56) 8082657 8080142 8081447 8081816 8080834 8081603 8082441 N/A 926008 926009 Scout sixty 16-20 572248 8082657 8080142 8081447 8081816 8080834 8081603 8082441 N/A 926008 926009 Scout Sixty 16-20 572249(56) 8082657 8080142 8081447 8081816 8080834 8081603 8082441 N/A 926008 926009 Scout Bobber Sixty 20-22 572248 8082657 8080142 8081447 8081816 8080834 8081603 8082441 N/A 926008 926009 Scout Bobber Sixty 20-22 572249(56) 8082657 8080142 8081447 8081816 8080834 8081603 8082441 N/A 926008 926009 (56) Parts are black.

1131 INDIAN NEW PRODUCTS ADDED WEEKLY AT MOTORCYCLESTOREHOUSE.COM 572256 572258 572257 NATIONAL CYCLE, SPARTAN® QUICK RELEASE WINDSHIELDS You won’t find a better quality touring-sized windshield at such a great price! The Spartan® windshield has a stainless steel frame finished in a stealthy black powdercoat and looks perfect on the Scout. This full-size Quantum® hardcoated polycarbonate windshield comes in two heights and mounts to the SwitchBlade® Quick Release mount kit. NATIONAL CYCLE, WAVE QR QUICK RELEASE FAIRINGS WITH RAKE ADJUST Have the hottest looking bike around with the Wave QR® – the fairing that defines performance on the edge. Whether it’s slammed back or raked forward, the Wave QR®’s sculpted body captures the free spirit of your Scout motorcycle. The Wave QR® Fairing is made from FMR hardcoated polycarbonate. Ride it fast and ride it hard – it can take the abuse! The Wave QR® is a quick release fairing... it’s removable in just seconds, without tools, thanks to National Cycle’s SwitchBlade® Quick Release mount kit. And, it’s rake adjustable for custom-tuned performance and the looks you want! Years Dark Tint Mount kit Chrome Mount kit Black Scout 15-22 572258 572248 572249 Scout 60 16-22 572258 572248 572249 Windshield Measurements Wave QR® Fairings are measured from the headlamp cutout in a vertical line level to the top of the shield in the fully raked forward position. Width is measured in a straight line across the back of the shield at its widest point. Height Width Wave 10.50” (26.7cm) 18.00” (45.7cm) Windshield Measurements Height is measured from headlamp cutout to top of the shield. Width is measured in a straight line across the back of the shield at its widest point. Height Width 572256 18.50” (47.0cm) 18.00” (45.7cm) 572257 16.25” (41.3cm) 18.00” (45.7cm) Tall 18.5" Clear Wave QR® Dark tint Rake adjustable Mid-size 16.25" Clear Model Years Mount kit 18.50” 16.25” Chrome Lower Deflectors Holdster™ Windshield Pouch Scout 15-22 572248 572256 572257 N/A 926008 Scout 15-22 572249(56) 572256 572257 N/A 926008 Scout 100th Anniversary 2020 572248 572256 572257 N/A 926008 Scout 100th Anniversary 2020 572249(56) 572256 572257 N/A 926008 Scout Sixty 16-22 572248 572256 572257 N/A 926008 Scout Sixty 16-22 572249(56) 572256 572257 N/A 926008 Scout Bobber Sixty 20-22 572248 572256 572257 N/A 926008 Scout Bobber Sixty 20-22 572249(56) 572256 572257 N/A 926008 (56) Parts are black.

1132 INDIAN NATIONAL CYCLE, STREET SHIELD™ The Street Shield™ is a great choice for riders who need more wind protection than the Deflector Screen™ offers. Its No-Hole Ballsocket mounts provide a good range of adjustment, and the shallow headlamp cutout fits the Scout perfectly. The Street Shield™ features a solid 4-point mount that attaches to the handlebars and upper fork tubes. The 926143/926155 attaches to the handlebars with a U-clamp and Eyebolt system, while the 926149/926156 attaches to the handlebars with a QuickSet system for easy on-and-off convenience. U-clamp mount kit fits 1.00" (25mm) and 7/8" (22mm) handlebars and the QuickSet mount kit fits 1.00” (25mm) handlebars. 926149 926156 U-Clamp QuickSet Windshield Measurements Height is measured from headlamp cutout to top of the shield. Width is measured in a straight line across the back of the shield at its widest point. Height Width Street 17.00” (43.2cm) 16.00” (40.6cm) Street Ex 18.00” (45.8cm) 19.25” (48.9cm) Street QuickSet Clear Street QuickSet Medium tint NATIONAL CYCLE, FLYSCREEN® Add some real sizzle to your Scout! National Cycle’s Flyscreen® will give your Scout a dragster look – whether you’re headed for the quarter-mile strip or the local boulevard. The clean appearance is accented with a chrome front trim plate. A quality fork-mount system with countersunk screws offers an adjustable custom fit. Available in light tint high impact acrylic or dark tint FMR hardcoated polycarbonate. All mounting hardware is included. 909566 909567 Windshield Measurements Height is measured from headlamp cutout to top of the shield. Width is measured in a straight line across the back of the shield at its widest point. Height Width Flyscreen® 8.50” (21.6cm) 9.25” (23.5cm) Light tint Chrome plate Dark tint Chrome plate Model Year Flyscreen® chrome plate Flyscreen® black plate Light tint Dark tint Light tint Dark tint Spirit 01-03 909566 909567 572259 572260 Scout 01-03 909566 909567 572259 572260 Scout 15-22 909566 909567 572259 572260 Scout 100th Anniversary 2020 909566 909567 572259 572260 Scout Sixty 16-22 909566 909567 572259 572260 Scout Bobber Sixty 20-22 909566 909567 572259 572260 Models Years Street Shield Ex™ Street Shield™ U-Clamp Street Shield™ Quickset Light Tint Clear Tinted Clear Tinted Note: Kits are included Scout Sixty 16-22 909564 926143 926155 926149 926156 Scout 15-22 909564 926143 926155 926149 926156 Scout 100th Anniversary 2020 909564 926143 926155 926149 926156 Spirit 01-03 909564 926143 926155 926149 926156 Scout 01-03 909564 926143 926155 926149 926156

1133 INDIAN NEW PRODUCTS ADDED WEEKLY AT MOTORCYCLESTOREHOUSE.COM 926153 926159 U-Clamp QuickSet Deflector QuickSet Clear Deflector QuickSet Tinted Model Deflector Screen™ U-clamp Deflector Screen™ Quickset Year Clear Medium tint Clear Medium tint Note: Kits are included Chief 2022 926152 926158 926153 926159 Chief Dark Horse 2022 926152 926158 926153 926159 Scout Bobber Sixty 20-22 926152 926158 926153 926159 Scout Bobber Twenty 20-22 926152 926158 926153 926159 Scout Bobber 18-22 926152 926158 926153 926159 Scout Sixty 16-22 926152 926158 926153 926159 Scout 15-22 926152 926158 926153 926159 Scout 100th Anniversary 2020 926152 926158 926153 926159 Spirit 01-03 926152 926158 926153 926159 Scout 01-03 926152 926158 926153 926159 NATIONAL CYCLE, DEFLECTOR SCREEN™ The Deflector Screen™ offers the no-tool Rake Adjust hardware. This simple rake angle adjustment feature has made this small windshield popular among motorcyclists everywhere. The 926152/926158 Deflector Screen™ attaches to the handlebars with the U-Clamp and Eyebolt system. The 926153/926159 Deflector Screen™ attaches to the handlebars with the QuickSet system for easy on-and-off convenience. U-clamp mount kit fits 1.00" (25mm) and 7/8" (22mm) handlebars and the QuickSet mount kit fits 1.00” (25mm) handlebars. Windshield Measurements Height is measured from headlamp cutout to top of the shield. Width is measured in a straight line across the back of the shield at its widest point. Height Width Deflector 14.00” (35.5cm) 14.00” (38.1cm) 569895 569896 NATIONAL CYCLE, MOHAWK™ WINDSHIELDS Continuing the minimalist, sporty tradition of the famous Flyscreen®, the new Mohawk™ features a taller and wider size with a special ‘V’ profile for added wind management. The Mohawk™ is manufactured from FMR hardcoated polycarbonate for unbeatable strength and impact resistance. The quality Linking Arm fork mount system with countersunk screws offers a custom fit for almost any motorcycle with open front forks. The mounting hardware is exactly the same as the original Flyscreen®, so you know how versatile and adaptable this new windscreen will be! Windshield Measurements Height is measured from headlamp cutout to top of the shield. Width is measured in a straight line across the back of the shield at its widest point. Height Width Mohawk™ 9.25” (23.5cm) 11.75” (29.8cm) Dark tint Black hardware Dark tint Chrome hardware Model Year Chrome hardware Black hardware Spirit 01-03 569895 569896 Scout 01-03 569895 569896 Scout 15-22 569895 569896 Model Year Chrome hardware Black hardware Scout 100th Anniversary 2020 569895 569896 Scout Sixty 16-22 569895 569896 Scout Bobber Sixty 20-22 569895 569896

1134 INDIAN 863264 863263 KURYAKYN, SIGNATURE SERIES VANTAGE HEADLAMP BEZEL Made from durable lightweight ABS. The Satin black finish can be easily prepped and painted to match custom color schemes. Direct replacement with easy bolt-on installation re-using factory hardware. Designed by John Shope of Dirty Bird Concepts. 14-18 Chieftain; 19-22 Chieftain Classic; 15-22 Roadmasters Classic 863263 Chrome 863264 Satin black NATIONAL CYCLE, HAND DEFLECTORS National Cycle Hand Deflectors are an easy-to-install, economical solution for keeping your hands warm and dry. Coupled with a windshield, Hand Deflectors protect your entire upper body from cold wind and rain. They also make heated grips work more effectively. Hand Deflectors mount easily and securely to the Scout’s mirror mounts, yet allow plenty of room for lever movement when wearing heavy gloves. They make a windshield function more like a fairing. 560717 560717 KURYAKYN, FAIRING TURN SIGNAL TRIM Continues the design-line from the OEM Chrome panel to your turn signals on the front of the Chieftain, these trim pieces will take your ride to the next level. Lightweight injection molded ABS. 14-18 Chieftain; 19-22 Chieftain Classic; 15-22 Roadmasters Classic 560717 Chrome 863296 562771 KURYAKYN, DRIVING LIGHT BEZELS Adds a bit of chrome in an overlooked place. Made of durable lightweight ABS plastic. Easy to install. 14-18 Chieftain; 19-22 Chieftain Classic; 15-22 Roadmasters Classic 562771 Chrome KURYAKYN, AZTEC STEREO ACCENT Accent to bring life to the panel surrounding the Indian Ride Command touchscreen and controls for a completely new look. Made from durable injectionmolded ABS. 17-20 Chieftains, Roadmasters 863235 Chrome 863235 863229 KURYAKYN, AZTEC GAUGE CLUSTER ACCENTS Gives the gauge section the custom touch. Injectionmolded ABS. Hassle-free installation with the included high-strength adhesive. Note: Great in combination with the Aztec Stereo Accent. 17-20 Chieftains, Roadmasters 863229 Chrome KURYAKYN, WINDSHIELD TRIM Fits the top-edge of the fairing, bringing it to new optical heights. Easy to install with the included adhesive. 14-18 Chieftains; 19-22 Chieftain Classic; 15-22 Roadmasters Classic 863296 Chrome 863296 Model Year Hand Deflectors light tint Chief Classic/Chief Vintage 14-16 8080267 Scout Bobber Sixty 20-22 572372 Scout 60 16-22 572372 Scout 15-22 572372 Chief 09-13 N/A Chief 99-03 901244 Scout 01-03 901238 Spirit 01-03 901238

1135 INDIAN NEW PRODUCTS ADDED WEEKLY AT MOTORCYCLESTOREHOUSE.COM KURYAKYN, VANTAGE DASH CONSOLE Bolt-on, direct replacement for the stock Indian dash console Includes 'knockouts' for models with power locks and heated grips. Manufactured from qualityA380 aluminum in a chrome or satin black finish. Design by John Shope of Dirty Bird Concepts. 14-22 Chieftain & Roadmasters (excl. 18-22 Roadmaster Elite) 573419 Chrome 573420 Satin black 573419 573420 KURYAKYN, AZTEC TOP DASH ACCENT Installs above the touch screen for a unique appearance. Manufactured from injection molded ABS and easily installed with included VHB adhesive tape. 17-20 Chieftains, Roadmasters 567274 Satin Black 567274 863657 863660 577994 577995 RSD, BOSS & ENZO SEATS Designed for riders in need of a little extra padding. Detailed triple stitch, hand-sewn lines and raised perforated pattern coupled with distressed vinyl. With RSD metal logo. Available with the Boss (Diamond triple stitch style) and the Enzo (pleated stitch style) in a solo or 2-up version for an occasional passenger. All Roland Sands seat have one thing in common... a high level of detail and quality that blends in as well as it stands out. Sizes given are rider & passenger seat area widths. 14-22 Scouts (excl. Bobber) 863657 Black Boss solo. 9.5" (24.1cm) 863659 Black Boss 2-up. 9.5" (24.1cm) & 6" (15.2cm) 863658 Brown Enzo solo. 9.5" (24.1cm) 863660 Brown Enzo 2-up. 9.5" (24.1cm) & 6" (15.2cm) MUSTANG, STANDARD TOURING SOLO SEATS The Standard Touring solo keeps the old-school bobber styling intact, while also delivering a significant upgrade in rider comfort and positioning. The 13” wide solo is 1” wider than stock with a contoured bucket that offers excellent lower back support, keeps the rider at a similar reach to the controls and eliminates sliding back in the saddle so you can ride hard and rack up the miles. Choose smooth and textured black vinyl, or opt for the classic contrasting distressed brown with textured black vinyl. Which ever you choose, both are guaranteed to enhance style with large diamond-stitched center panels and reinforced triple stitching on the sides. 18-22 Scout Bobber 577994 Black. Diamond stitch. 13" (33cm) 577995 Brown/Black. Diamond stitch. 13" (33cm) SEATS DASH 863656 MUSTANG,VINTAGE TANK BIB Contoured to hug the fuel tank and helps to prevent paint damage. Soft felt-backed. A custom touch to a very visible place. 14 - 18 Ch i e f , Ch i e f t a i n ; 17 - 18 Springfield 863656 Vintage tank bib

1136 INDIAN 569512 569513 MUSTANG, JARED MEES SIGNATURE SERIES SEATS What is power without control, or a seat without craftsmanship? The design was left to Jared, a man that knows a thing or two about fast bikes and the kind of seat he likes. The actual build was done by Mustang craftsmen, champions in their own right and fully capable to bring you glory as envisioned by Jared Mees. Seats come with a carbon fiber-styled Tuck 'n Roll inlay, gunmetal stitching around the outer perimeter with 'Mees' subtly embroidered in black. Note: Seats marked with 'TR' are seats with the 'Tuck 'n Roll' style upholstery. 15-22 Scout, Scout Sixty 569512 Solo TR. 10" (25.4cm) 569513 Fastback TR. 10" (25.4cm) & 5" (12.7cm) MUSTANG, SHOPE SIGNATURE SERIES CAFÉ SEATS Designed by John Shope of Dirty Bird Concepts, a man that lives to create. He designed and Mustang crafted them to perfection. Café inspired seat that features double stitched, high quality expanded vinyl and a perforated-design Tuck 'n Rollstitched (Café TR solo seat) or a perforated Diamond-stitched center panel (Tripper 2-up seat). Gives the bike a streamlined appearance and sets the rider in an aggressive but still comfortable position. Sizes given are rider & passenger seat area widths. 15-22 Scouts (excl. Bobber) 863642 Café solo. TR stitch. 9" (23cm) 863643 Tripper 2-up. Diamond stitch. 8.5" (21.6cm) & 5" (12.7cm) 14-21 Chief; 14-22 Chieftain; 14-22 Dark Horse; 15-22 Roadmaster; 16-22 Springfield 863644 Café Solo. Diamond stitch. 11.5" (29.2cm) 863645 Tripper 2-up. Diamond stitch. 11" (28cm) & 6" (15.2cm) 863642 863645 SEATS 863631 863630 MUSTANG, RUNAROUND™ SOLO If you'd say: 'Make me a solo, as low & lean as possible, for the coolest look, but still comfortable, for in and around town riding'... Mustang already did it and it came out as good as you could imagine. Just ask for the RunAround™ Solo and be impressed. Sizes given in inches are rider seat area width. Note: Not for use with a passenger seat. 15-22 Scout; 16-22 Scout Sixty 863630 Black. 9.5" (24cm) 863631 Brown vinyl. 9.5" (24cm) 863628 863627 MUSTANG, WIDE TOURING SOLO & PASSENGER SEATS As you rack-up the miles there's one thing becoming ever more important, a good quality seat built by people that knew exactly what they were doing when building it. Available with or without a fully adjustable backrest for both rider and passenger that can easily be removed when not required. Manufactured with controlled-density foam which is correctly cut to provide support and ultimately all-day riding comfort. The 16.5" (42cm) wide solo positions the rider 1.5" (3.8cm) back from stock for a more spacious feel. A simple tasteful decorative braid is used to give it that little optical extra. Sizes given in are seat area widths. Note 1: Will not work with stock passenger seat or solo rack. Passenger seat is sold separately. Note 2: Will not work with stock solo seat. Will not fit Roadmaster models unless trunk and lighting harness are removed. Note 3: Passenger seat comes with receiver only, backrest must be purchased separately. 14-21 Chief; 14-22 Chieftain; 14-22 Dark Horse; 15-22 Roadmaster; 16-22 Springfield 863627 Solo seat. 16.5" (42cm) (note 1) 863652 Solo seat, with rider backrest. 16.5" (42cm) (note 1) 863628 Passenger seat. 13" (33cm) (note 2) 863653 Passenger seat, with passenger backrest receiver. 13" (33cm) (note 2, 3) 863654 Backrest pad only for 863653 863652 863653 863654

1137 INDIAN NEW PRODUCTS ADDED WEEKLY AT MOTORCYCLESTOREHOUSE.COM 863646 MUSTANG, VINTAGE FENDER BIB Designed for use with solo seats to help prevent paint damage and look good doing it. Installs to stock seat mounts. Handmade and contoured to hug the fender. 14-19 Chief. Chieftain; 17-21 Springfield 863646 Vintage fender bib 863629 KURYAKYN, QUICK SEAT RELEASE Made from machined steel with a knurled grip for easy removal and installation without tools. Works with virtually any factory or aftermarket seat. Will not fit Scout models with a solo seat. 14-22 Indian (excl. Scouts with solo seats) 863254 Chrome 863255 Gloss Black 863255 MUSTANG, VINTAGE SISSY BAR PAD Dimensions: 12" (30.5cm) wide x 9" (22.9cm) high. 14-21 Chief, Chieftain, Springfield, Dark Horse, Roadmaster 863629 Black vinyl KURYAKYN, MULTI-PURPOSE RIDER & PASSENGER BACKREST This is a multipurpose backrest and luggage rack system. Once installed, no tools are needed for adjustments. Simply tilts forward making the switch from passenger to rider backrest possible in seconds. Fully adjustable via stainless sliding rods with push-button locks & knurled threaded knobs. Sturdy aluminummain frame with comfortably padded backrest. Folding luggage rack is steel with rubber anti-slip inserts. Note: Mount bracket set 567699 must be purchased separately. 14-22 Indian (excl. Scout, Roadmaster, FTR & 2022 Chief) 542732 Chrome 542353 Black & Chrome Mount bracket set Required for installation of 542732/542353 backrests. 567699 Chrome 567699 863254 863641 MUSTANG, STANDARD TOURING SOLO & PASSENGER SEATS The Mustang Standard Touring series consist of separately available 13" (33cm) wide rider solo seats and a, optional available, 8.5" (20cm) wide passenger seat. Large enough for comfort, small enough to not compromise the looks of the bike. Manufactured with Mustang's proprietary foam which is cut in angles for the best long distance experience. Features a fully-adjustable rider backrest that can easily be installed or removed at will. Comes with a vinyl cover with an integrated vinyl center panel insert for an extra touch of class. 15-22 Scout; 16-22 Scout Sixty 863636 Black. 13" (33cm) 863649 Black. With rider backrest. 13" (33cm) Passenger seat 863637 Black. 8.5" (21.6cm) Sissybar pads Installs to OEM Indian Scout sissybar 2880232-156 (quick release) and 2881127650 (bolt-on), which are optionally available through Indian Motorcycles. 863641 Black. 9" (23cm) high x 7.5" (19cm) wide 863649 863636 542732 542353 863637

1138 INDIAN KURYAKYN, PLUG-N-GO RIDER BACKREST Adjustable Plug-N-Go rider backrest from durable welded and stamped steel with mounting bracket. The premium synthetic leather pads contoured design provides lower back support. Height is easily adjusted by pulling up or down, a sliding action, to mate with the coordinated notches on the mounting bracket. Front to rear is adjustable upon installation. Pad measures 7" (17.8cm) high x 10" (25.4cm) wide. 14-22 Indian (excl. Scout) 562769 Black PALADIN® QUICKSET™ BACKREST Convert your bike from a 2-up tourer to a solo boulevard cruiser in under 5 seconds, with no tools! National Cycle’s Paladin® QuickSet™ backrest uses an innovative, key-lockable mounting system that’s designed for an optimal fit on each specific make and model. All moving components are made from stainless steel for years of reliable, smooth operation, and all visible metal components are either stainless steel or finished in bright, show-quality chrome. After unlocking, just lift the levers on the bottom of the backrest side plates and pull up on the backrest to remove it. The Paladin backrest (sideplates with lock, sissy bar and pad), luggage rack, and QuickSet™. KURYAKYN, ALL IN ONE SISSY BAR KIT This model specific sissy bar comes with everything needed to install & ride. Includes mounts, hardware and a cushioned backrest pad made from weather- and UVresistant PU material. Easy to install durable all steel construction (mounts and uprights) with premium chrome plating. The backrest pad can be easily removed, when not required, for the clean look. Note: An optional luggage rack 906384 is old separately. 14-21 Indian (excl. Roadmaster, Scout & FTR) 906394 19" sissy bar kit 906393 21" sissybar kit 906384 Optional luggage rack 906394 906393 906384 BACKRESTS - SISSY BARS Model Year Quick Release Mount Kits Back Rest Luggage Rack Hardware to mount S.Bags & Paladin Scout Sixty 16-20 573621 8082401 8082505 8080103 Scout 15-21 573621 8082401 8082505 8080103

1139 INDIAN NEW PRODUCTS ADDED WEEKLY AT MOTORCYCLESTOREHOUSE.COM NATIONAL CYCLE, SOLO LUGGAGE RACK The solo Scout rider gets something special, inspired by the original accessory from the 1940s — a cool fender-mounted Solo Luggage Rack that looks like it’s fresh off of a 1942 Indian Sport Scout. Simply remove the passenger pillion and use the supplied hardware to mount the rack to the stock passenger seat mount points. It’s a quick and simple job that pays back big style points as well as added luggage carrying capacity 15-22 Indian Scout; 16-22 Indian Scout 60 573619 Chrome 573620 Gloss black powdercoated 573620 573619 KURYAKYN, SADDLEBAG TOP TRIM Fits saddlebag lids. Accentuates the smooth classic curves as found on Indian hard bags. Kit incl. four accents, two pieces per saddlebag. Chrome plated ABS material. Easy installation with included high-strength adhesive. 14-21 Chieftains, Roadmasters, Springfields (excl. Roadmaster Classic; 19-20 Chieftain, Chieftain Dark Horse & Chieftain Limited) Elite 863260 Chrome 863260 863243 599653 KURYAKYN, CUSTOM TIE-DOWN BRACKETS Custom brackets that bolt to the lower triple tree and provide a secure location to attach straps for easy and safe transport. Laser-cut from high-quality durable steel. Easy installation. 14-21 Chief, Classic, Dark Horse, Vintage models 863243 Chrome 14-21 Chieftain and Road Master models 599653 Satin black 586439 586438 KURYAKYN SADDLEBAG ACCENT Enhance the classic flowing contours found on Indian hard bags with these easyto-install streamlined accents that add a custom look while complementing the factory trim. - Dims: 26.25" long x 4.5" tall (at tallest point). - Durable, lightweight injection-molded ABS construction. - Gives the saddlebags a slightly stretched/extended appearance. - Installation uses automotive-grade 3M® VHB™ and requires no drilling or modifications. 14-21 Indian models (excl. Scout, FTR, 19-20 Chieftain, Chieftain Dark Horse, Chieftain Limited, & Chieftain Elite, 2020 Springfield Dark Horse, Roadmaster Dark Horse) 586438 Chrome 586439 Satin black KURYAKYN, TRUNK LID ORGANIZER Keep the smaller items organized and easily accessible with the trunk lid organizer that mounts securely to Indian trunk lids and contains a variety of pockets for storage. Extra-secure lid-mounted snap tab attachments reinforced by high-strength hook-&-loop fasteners. Additional features include three separate storage pockets for optimum organization, a flip-out removable mirror in separate pocket and a separate MOLLE-integrated tool roll/Dopp kit. Made from durable moisture-resistant and UV-treated 1200-denier polyester. 15-22 Roadmaster (excl. Roadmaster Classic); 14-22 Chieftain with a tour trunk 906396 Black 906396 LUGGAGE

1140 INDIAN HIGHWAY HAWK, ENGINE GUARDS This crash bar is built from 38 or 32mm steel tubing. Designed to work with stock components. Complete with installation hardware. Note: For protection in tip-over events only. Not designed for crashes while riding. Indian Chr. Gloss black -- 939345 38mm diameter. 14-up Chief Classic; 15-up Chief Dark Horse; 14-up Chief Vintage 939346 939347 32mm diameter. 'Low'. 14-up Chief Classic; 15-up Chief Dark Horse; 14-up Chief Vintage -- 939348 32mm diameter. 14-up Chief Classic; 15-up Chief Dark Horse; 14-up Chief Vintage 939345 939346 HIGHWAY HAWK, BILLET UNIVERSAL SOLO LUGGAGE RACK Billet aluminum solo rack. Approximately 8mm thick. Maximum load capacity 5kg. Dimensions approx.: 32cm long x 14cm wide. M6x16mm Allenhead bolts included (no brackets). Note: Not compatible with a passenger seat. Universal luggage rack 939381 Chrome 939382 Gloss black Indian mounting brackets 14-up Chief Classic; 15-up Chief Dark Horse; 14-up Chief Vintage; 14-up Chieftain Black powder coated steel. Optional mounting brackets for solo luggage rack chrome 939381 or black 939382 (billet aluminum rack) or chrome 939401 or black 939402 (tubular steel rack). 939467 Black powder coated 939381 939468 939382 939469 HIGHWAY HAWK, BILLET ALUMINUM SOLO LUGGAGE RACK Billet aluminum solo luggage rack. Approximately 8mm thick. Dimensions approx.: 32cm long x 14cm wide. Maximum load capacity 5kg. Includes installation hardware and required brackets. In chrome or gloss black. Note: Not compatible with a passenger seat. Indian 14-up Chief Classic; 15-up Chief Dark Horse; 14-up Chief Vintage; 14-up Chieftain 939468 Chrome 939469 Gloss black 15-up Scout 939470 Chrome 939471 Gloss black 939401 939463 939467 939467 939402 939464 HIGHWAY HAWK, UNIVERSAL TUBULAR SOLO LUGGAGE RACK Steel solo rack. Approx. 8mm thick. Maximum load capacity 5kg. Dimensions approx.: 34cm long x 18cm wide. Includes clamps and screws, does not include mount brackets. Note: Not compatible with a passenger seat. Universal 939401 Chrome 939402 Gloss black Indian mounting brackets 14-up Chief Classic; 15-up Chief Dark Horse; 14-up Chief Vintage; 14-up Chieftain Black powder coated steel. Optional mounting brackets for solo luggage rack chrome 939381 or black 939382 (billet aluminum rack) or chrome 939401 or black 939402 (tubular steel rack). 939467 Black powder coated HIGHWAY HAWK, SOLO TUBULAR LUGGAGE RACKS Steel solo rack. Approximately 8mm thick. Maximum load capacity 5kg. Dimensions approx.: 34cm long x 18cm wide. Complete with all parts required for assembly, including brackets. With a chrome plated or black powder coated finish. Note: Not compatible with a passenger seat. Indian 14-up Chief Classic; 15-up Chief Dark Horse; 14-up Chief Vintage; 14-up Chieftain 939463 Chrome 939464 Gloss black 15-up Scout 939465 Chrome 939466 Gloss black ENGINE GUARDS LUGGAGE

1141 INDIAN NEW PRODUCTS ADDED WEEKLY AT MOTORCYCLESTOREHOUSE.COM 586437 KURYAKYN NECK COVERS Cover unsightly frame welds and hoses with brilliant chrome to completely enhance your Indian's front end. This kit customizes the frame's steering neck and also includes chrome down tube covers for a seamless transition. Bolt-on design with opening for VIN number access. Cast from durableA380 aluminum alloy. Kit includes neck and down tube covers for a fully chromed-out look Indian: 14-21 Chieftain, Roadmaster & Springfield models 586437 Chrome KURYAKYN, CHIN FAIRING Covers the oil filter, voltage regulator, and wiring. Made from durable high-impact injection-molded ABS and includes a steel mounting bracket for easy bolt-on installation. 14-21 Indian (excl. Scout, FTR, Challenger) 863238 Chrome 863237 Satin Black 863237 863238 FRAME COVERS 863309 PS, FORK PROGRESSIVE SPRING KIT Standard height stock replacement. A progressive rate spring has the advantage of a rising rate resistance to compression. The benefit of this is that the spring can be soft at the start of the travel to offer a 'plush' ride, but is firm enough at the end to soak-up the big bumps. 15-17 Scouts 863310 PS, PROGRESSIVE FORK LOWERING KIT This kit, when combined with shorter than stock rear shocks, will give you that low, slammed look. Comes complete with progressively wound fork springs, spacers, and instructions. 15-17 Scouts 863309 863310 FORK SPRING & FORK LOWERING KITS KURYAKYN, LOWER TRIPLE TREE WIND DEFLECTOR Lower triple tree wind deflectors redirect wind and water passing through the fork legs downward to reduce moisture and turbulent upward airflow between the tank and fairing. Made from durable stamped steel that holds up to harsh road abuse. Easy installation with included hardware below the lower triple tree. Improves rider comfort by re-directing turbulent airflow. Quality stamped steel construction in a flawless chrome finish. 14-18 Chieftain, 19-22 Chieftain Classic; 15-22 Roadmaster 568408 Chrome KURYAKYN, SADDLE SHIELDS Frame-mounted polycarbonate saddle shields to redirect heat from the motor and head pipes away from the rider to increase comfort in stop-and-go traffic. Bolts directly to the rear tank mount using existing hardware. 14-22 Indian (excl. Scout) 860722 Reflective Smoke finish 860722 568408

1142 INDIAN PROGRESSIVE SUSPENSION, REAR SHOCKS Shocks for any kind of rider, from great value for stock replacements to some of the finest shock absorbers on the market today. Note: Target ride length is the length the shock should have once installed and as the bike will be ridden. That is with the rider in the saddle, including possible luggage or passenger. Increase or decrease spring pre-load accordingly to achieve Target Ride Length. 15-22 Scouts 413 SERIES SHOCKS The 413 Series Shock is simple, durable and will be an improvement to your bike's suspension performance for as long as you are riding it. A dual-spring progressive rate with a five-position cam style pre-load adjuster lets you dial in your ride whether you're a light rider or heavy hitter. Available in a Standard Weight or Heavy-duty (250+ lbs./113+kg). 11" (28cm) (shorter) Target Ride Length: 10.75" (27.3cm). Chr. Black 863312 863311 Standard 863314 863313 Heavy Duty 11.5" (29.2cm) (stock length) Target Ride Length: 11" (28cm). Chr. Black 863316 863315 Standard 863318 863317 Heavy Duty 444 SERIES SHOCKS 444 Series Shocks feature a proprietary patented Frequency Sensing Technology (FST) that has the unique ability to dynamically adjust damping as you ride. Whether you’re hitting small or the big bumps in the road, the shock distributes oil through ports accordingly to best soak-up the hit making for an ultimately comfortable ride. A top mount threaded pre-load adjuster allows for fine-tuning with a simple twist of the cap. Available in a Standard Weight or Heavy-duty (250+ lbs./113+kg). 11" (28cm) (shorter) Target Ride Length: 10.75" (27.3cm). Chr. Black 863320 863319 Standard 863322 863321 Heavy Duty 11.5" (29.2cm) (stock length) Target Ride Length: 11" (28cm). Chr. Black 863324 863323 Standard 863326 863325 Heavy Duty 12" (30.5cm) (longer) Target Ride Length: 11.25" (28.6cm). Chr. Black 863328 863327 Standard 863330 863329 Heavy Duty 970 SERIES PIGGYBACK RESERVOIR SHOCKS Inspired by racers, riders and those that demand more of their bikes than weekend coffee runs. These 'built in the USA' 970 Series shocks combine a high pressure gas monotube design with deflective disc damping routed through two unique circuits and adjustable for compression damping via an easily accessible knob. The shock body and piggyback are internally coated to reduce friction/heat. 12" (30.5cm) (stock = 11.5"/29.2cm) Target Ride Length: 11.25" (28.6cm). Chr. Black -- 863331 Standard SHOCK ABSORBERS Progressive springs explained Progressively wound springs have advantages over straight rate springs. A straight rate spring only offers linear resistance to compression and is always a compromise. For example, if you have a 20lbs. straight rate spring it will take 20lbs. of force to compress the spring one inch. Then it will take another 20 lbs. of force to compress it the next inch, and so on, until the end of the travel. A Progressive Rate Spring has the advantage of a rising rate resistance to compression. For example, a 15lb. to 25lb. Progressive Rate Springs will take 15lbs. to compress it the first inch, then 17lbs. the next inch, and so on, until the end of the travel; it will take an additional 25lbs. to compress it the last inch. The benefit of this is that the spring can be soft enough at the start of the travel to offer a “plush” ride yet be firm enough at the end of the travel to soak up the big bumps. Nitrogen (N2) filled All Progressive Suspension shocks are nitrogen pressurized to help prevent oil foaming and maintain best possible damping characteristics in extreme conditions When Heavy Duty? If you are a lightweight rider with a lightweight passenger, heavy duty shocks will give you a harsh ride. For Big Guys & Gals with a lot of baggage, heavy duty spring are the way to go. Heavy Duty is not better, it's different. Heavy Duty shocks or springs are recommended to be used on motorcycles that are operated at or near the manufacturers maximum load rating over 50% of the time. 413 Black 413 Chrome Heavy duty 444 Chrome 444 Black 970 Black

1143 INDIAN NEW PRODUCTS ADDED WEEKLY AT MOTORCYCLESTOREHOUSE.COM KURYAKYN, COMFORT FRONT SHIFT LEVER You might think it's a stretch to associate comfort with a shift lever. All we need to change your mind is one ride using our Comfort shift lever. The extended design measures 1/2" longer than stock, is angled to allow more natural shifting movement and frees up extra room on the floorboards. * Rugged forged aluminum construction * Matching Comfort shift peg (581876 or 581877) sold separately * Can be used by itself or combined with Kuryakyn Heel shift lever (863247 or 863248) sold separately 14-21 all Indian (excl. Scouts, FTR & Challenger) 581863 Chrome 581864 Gloss Black 581863 581864 KURYAKYN, HEEL SHIFT LEVER Heel shifter option. Accepts any Kuryakyn shift pegs for Indian or stock Indian shift pegs. Ergonomic design that extends behind the floorboard for a uninterupted footspace. Easy bolt-on installation to the factory toe shift location with included hardware and spacer. 14-21 all Indian (excl. Scouts, FTR & Challenger) 863248 Chrome 863247 Gloss Black 863248 863247 KURYAKYN, COMFORT BRAKE PEDAL The Kuryakyn Comfort brake pedal proves love at first stop is possible. The ergonomic design is extended 1/2" longer than stock and angled for a more natural engagement position, keeping your foot out from under the pedal so it's easier to actuate the rear brake. * Rugged forged aluminum construction * Incl. matching aluminum brake peg with durable EPDM rubber for surefooted grip * Measures 1/2" longer than stock with improved angle design 15-21 Indianmodels (excl Scouts, FTR & Challenger) 581861 Chrome 581862 Gloss black 581862 581861 860729 863268 KURYAKYN, SPEAR BRAKE PEDAL PAD Made from quality die-cast aluminum with form-fitted proprietary EPDM premium rubber compound. Provides a secure brake pedal feel in wet or dry riding conditions. Installation is hassle-free and re-uses stock hardware. Dimensions: 4.5" (11.4cm) wide x 3" (7.6cm) high. 14-21 Indian models (excl. 18-21 Chief, 18-21 Chieftain; 19-21 Chieftain Dark Horse; 20-21 Chieftain Elite; 20-21 Springfield Dark Horse; 20-21 Roadmaster Dark Horse; Scout; FTR & Challanger) 860729 Chrome 863268 Satin Black KURYAKYN, COMFORT SHIFT PEG Designed for use with the Kuryakyn Comfort Front Shift Lever, its cast aluminum construction and durable EPDM rubber deliver surefooted grip. This perfect match to the Kuryakyn Comfort Brake Pedal will also fit both OEM and any aftermarket shift lever designed for Indians (excl Scouts). 14-22 all Indian ( Excl Scout & FTR) 581876 Chrome 581877 Gloss Black 581876 581877 BRAKE PARTS & ACCESSORIES

1144 INDIAN 569792 569796 569791 569793 569795 ARLEN NESS, DEEP CUT HEEL/TOE SHIFTER & BRAKE ARMS Transforms the standard toe shifter to the classic heel/toe shifter system. Fits in combination with stock and most aftermarket floorboards. Shifter arms come complete with Deep Cut styled shift pegs. Astyle matching Deep Cut brake arm, complete with peg, will complete the transformation. Billet aluminum in a chrome or black anodized finish. Note: Will style match other Deep Cut products. 14-22 Indians (excl. Scouts, FTR & Challenger) Chr. Black 569791 569792 Toe shifter 569793 -- Heel shifter 569795 569796 Brake arm ARLEN NESS, 10-GAUGE MASTER CYLINDER COVER SET Billet aluminum in the 10-gauge design. Direct replacement for the stock master cylinder covers of both hand and foot controls. To be used with stock gaskets. Available in a chrome or black anodized finish. 15-22 Scouts 569843 Chrome 569844 Black 569843 569844 863257 KURYAKYN, REAR MASTER CYLINDER COVER Direct replacement for the OEM reservoir cap. Made from quality die-cast aluminum. Easy two-bolt installation. 14-17 Indian (excl. Scouts) 863257 Chrome BRAKE PARTS & ACCESSORIES

1145 INDIAN NEW PRODUCTS ADDED WEEKLY AT MOTORCYCLESTOREHOUSE.COM ARLEN NESS, 10-GAUGE FENDER STRUT COVER KIT Billet aluminum in the 10-gauge design. Uses the stock rear fender mounting locations. Offers a billet accent and detail to the rough look of the stock fender struts. Incl. chrome hardware. Available in a chrome or black anodized finish. 15-22 Scouts 569841 Chrome 569842 Black 569841 569842 KURYAKYN, L.E.D. REAR FENDER STRIP LIGHTS Features red lenses with chrome-plated ABS housings. Offers additional run-brake lighting. Plug & Play wiring. Easy installation with included high-strength adhesive. 14-20 Indian (excl. 19-20 Chieftain, Chieftain Dark Horse, Chieftain Limited; 2020 Chieftain Elite; Springfield Dark Horse; all Scouts) 576995 Satin black 572373 572374 Front Fender Rear Fender Years Front Rear Rear Indian Scout 60 2016-20 572374 572374 572373 Scout 2015-20 572374 572374 572373 NATIONAL CYCLE, CAST FRONT/REAR FENDER TIPS Create the perfect fender treatment for your Indian Scout! Unlike traditional fender tips, these are specially designed to complement the design of the OEM Scout fenders. Cast fender tips are an economical way to add that finishing touch to your customized bike. By casting the product, the detailed shape that distinguishes these tips really stands out. These cast tips have a show bike polish with a jewel-quality chrome finish. KURYAKYN, FRONT FENDER TIP Protection and style for your front fender. Add this chrome accent and avoid or cover those ugly stone chips. Embellish the contours of your front fender quickly and painlessly. Indian: 14-20 Chief, 15-20 Roadmaster, Roadmaster Classic, 14-18 Chieftain, 19-20 Chieftain Classic Universal 6” or wider style fenders (does not fit fenders with flat center width) 8081044 Chrome 8081044 FENDERS 576995

1146 INDIAN MOTOR PARTS - CAMSHAFT KIT Andrews camshaft specification chart Intake° Exhaust° Duration°Valve Lift Valve Lift TDC Centerline Open/Close Open/Close In/Ex In/Ex In/Ex In/Ex TS550 08/30 33/04 218/222 .550" .136"/.116" 101/107 TS570 12/36 48/04 228/232 .570" .159"/.116" 102/112 Timing and duration measured at zero lash and .050" tappet lift off base circle. Information provided by Andrews Products Inc. ANDREWS, CAMSHAFT KITS Set of three high-end USA made camshafts to make the 111" Thunderstroke in the Indian Chief come alive. Note: The compression release, compression release spring, compression release pivot pin, and the compression release pin set screw must be re-used from the OEM Indian cams and installed in the Andrews camshafts which requires grinding the backside of the pin. 14-19 Indians (excl. Scouts) 572144 TS550 572145 TS570 Application recommandations Application recommandations by Andrews. TS550: Bolt-in. More lift and more duration than stock. Provides extra HP from 2000–6000 RPM. For stock or modified engines TS570: Bolt-in. Provides HP and torque in the 2200–6500 RPM range. 572144 572145 MOTOR PARTS - COVERS KURYAKYN, TAPPET BLOCK ACCENT Simple to install tappet block accent cover. 14-20 Indian (excl. Scouts. FTR & Challenger) 863290 Chrome 863290 KURYAKYN, CYLINDER BASE COVER The missing piece of chrome at the cylinder base. Manufactured from aluminum with a flawless chrome finish. Great looks for the Indian Big Twins on its own or in combination with other engine-look enhancers. Easy install with included high strength & high temp 3M VHB adhesive. 14-20 Indian models (excl. Scouts, FTR & Challenger) 573423 Chrome ARLEN NESS, FINNED CAM COVER CNC machined billet aluminum in a sculpted design to match the fins on the rocker covers. Direct for replacement for the stock cam cover. Available in a chrome or black anodized finish. Note: Style compatible with Ness finned horn & primary covers. 14-20 Indians (excl. Scouts) 569820 Chrome 569819 Black 569820 569819 ARLEN NESS, 10-GAUGE THERMOSTAT COVER Billet aluminum in the 10-gauge design. Direct replacement for the stock cover. Incl. chrome hardware. Available in chrome. 15-20 Scouts (excl. Bobber) 569825 Chrome ARLEN NESS, 10-GAUGE STATOR COVER Billet aluminum in the 10-gauge design. Direct replacement for the stock cover on the left side of the engine. Incl. chrome hardware. Available in a chrome or black anodized finish. 15-20 Scouts 569831 Chrome 569838 Black 569831 569849 569825 573423

1147 INDIAN NEW PRODUCTS ADDED WEEKLY AT MOTORCYCLESTOREHOUSE.COM ARLEN NESS, 10-GAUGE PRIMARY COVER Billet aluminum in the 10-gauge design. Direct replacement for the stock cover on the right side of the engine. Incl. chrome hardware. Available in chrome. 15-20 Scouts (excl. Bobber) 569829 Chrome 569849 ARLEN NESS, FINNED PRIMARY COVER CNC machined billet aluminum in a sculpted design to match the fins on the rocker covers. Direct for replacement for the stock primary cover. Available in a chrome or black anodized finish. Note: Style compatible with Ness finned horn & cam covers. 14-20 Indians (excl. Scouts) 569824 Chrome 569823 Black 569824 569823 ARLEN NESS, TRANSMISSION PULLEY COVER Billet aluminum in the 10-gauge design. Direct replacement for the heavy cast aluminum stock cover. Incl. chrome hardware. Available in chrome. 15-20 Scouts 569839 Chrome 569839 863259 906389 860721 KURYAKYN INNER PRIMARY, ENGINE & TRANSMISSION COVERS Made from quality die-cast chrome plated aluminum. When all covers are combined be ready for a true right side transformation of the engine. Easy installation with included high-strength adhesive. 14-20 Indian (excl. Scout, FTR & Challenger) 863249 Inner primary cover 863287 Starter end cover 860721 Transmission center cover 14-18 Indian (excl. Scout) 863259 Rear oil panel accent 19-20 Indian (excl. Scout, FTR & Challenger) 906389 Rear oil panel accent Replacement parts 863295 3M VHB adhesive installation service kit only for 863249 863287 863249 TRANSMISSION/PRIMARY COVERS MOTOR PARTS - COVERS KURYAKYN EXHAUST PORT FILLERS Fills the nasty looking gap between cylinder head and exhaust port for a full-finned appearance. Machined outer edges to match all Indian Thunder Stroke 111 cylinder heads. Die-cast aluminum construction. Easy installation with bottom single-screw. Compression fit for a hardware-free appearance. 14-20 Indian (excl. Scouts) 560723 Exhaust port fillers 560723

RkJQdWJsaXNoZXIy NTExMDU=