Tecmate OptiMATE 6, 12/24V battery charger

With EU wall plug. 8 step 12V 5A / 24V 2.5A battery saving charger-tester-maintainer. Used for 12V and 24V starter and deep cycle Lead Acid, AGM, GEL & Deep Cycle batteries (12V=3Ah to 240Ah, 24V=1Ah to 100Ah) that demand accurate temperature controlled charging and unsupervised safe long term maintenance. - Designed for sensitive electronics: The 'Save' program has been designed for safe fully automatic low volt start (from 0.5 Volts) and 'pulse' recovery of deep discharged batteries connected to very sensitive electronics e.g. light aircraft, industrial equipment. - Protected against incorrect voltage selection: With 24V selected and a 12V battery connected the charger will immediately warn that a low voltage is sensed and will not proceed to charging. The user must confirm the nominal voltage of the connected battery is 24V before 'Save' mode activates. - Charging Amps: 5A @ 12V / 2.5A @ 24V (Ampmatic) - AmpMatic charge control: adjusts current to suit any battery size (12V=3Ah to 240Ah, 24V=1Ah to 100Ah) or condition for fastest and most complete charge - Indoor / Outdoor (lowest temperature: -40°F / -40°C). - Save: Low Volt Start of 0.5V (12V) + 1-step safe pulse recovery - For Lead Acid, AGM & GEL (12V=3Ah to 240Ah, 24V=1Ah to 100Ah) - Input: Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed - Weatherproof case with wall mounts - Incl. 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead & standard battery clip set included - No risk of overcharging - Sparks suppressed - Safe for vehicle electronics - Safe for long-term battery maintenance - Automatic shut-down if short-circuited or battery disconnected

Fits: > Universal