NAMZ, complete custom bike main wiring harness

Used as H-D style universal base to re-wire most carbureted OEM H-D models or set up a custom project. Works with any stand alone, Evo or Twin Cam ignition system. Designed to operate with a two-position key switch. A 3-position ignition switch with (car-like) key start can be used with a simple wiring modification. Wiring can be a challenge for a non-specialist, so it is therefore recommend having a professional do the installation. Includes following: - Amber running light and turn signal functions to the front turn signals - Run, brake and turn signal functions for the rear turn signals - OEM color-matching wiring with 11-second self canceling turn signal module Used as H-D style universal base to re-wire most carbureted OEM H-D models or set up a custom project. Works with any stand alone, Evo or Twin Cam ignition system. Designed to operate with a two-position key switch. A 3-position ignition switch with (car-like) key start can be used with a simple wiring modification. Wiring can be a challenge for a non-specialist, so it is therefore recommend having a professional do the installation. Includes following: - Amber running light and turn signal functions to the front turn signals - Run, brake and turn signal functions for the rear turn signals - OEM color-matching wiring with 11-second self canceling turn signal module - Fuse block holds a full size, commonly available & replaceable starter relay and (3) ATO fuses - A 30-Amp circuit breaker is installed and is ready for any regulator/charging system. - Oil, neutral, high beam, and turn signal indicator wiring - Color matching handlebar switch wiring as found on 96-13 non-Touring models. - Headlight wiring with headlight socket and terminals - Front turn signal connectors and terminals - Rear fender harness with connectors and terminals - Key switch wiring with ring terminals - Coil wire with ring terminals, tachometer, horn, oil sending unit, brake switch and neutral switch wiring with terminals - Sections of 3/16", 1/4", 3/8" and 1/2" ID heat shrink included - Heavy gauge 12 (+) power and (-) ground wires with terminals for battery connection.

Fits: > Universal H-D with carburetor